What removes contact glue residue best - Test - Boat McRill

Подписаться 1,8 тыс.

Просмотров 32 тыс.

50% 1

A while ago I was involved in a discussion on a facebook forum about what method best removes old contact glue residue from the inside of the hull after have removed hull lining.
I got some suggestions and decided to test Aceton, Label Off (glue residue remover), Thinner, Rotating brush, Japan Filler, Chisel and more. See the result of the test in the video.
Join the crew, subscribe to Boat McRill!
Subscribe to the channel so you won't miss any content: / @boatmcrill
Patreon: / boatmcrill
Sandpaper fund (Paypal): paypal.me/BoatMcRill
If you want to help out with sublines for the videos you can do that here: ru-vid.com_cs_p...
Music from AudioHero www.audiohero.com/
-------------------------------------------------------------------------------------------------
You can also find Boat McRill on the following places on the internet:
Facebook / boatmcrill
Twitter / boatmcrill
Instagram / mcrill2019
Reddit / boat_mcrill
Linkedin / boat-mcrill-a94972197

Хобби

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@hiseminencetheholymacdiarmada 3 года назад

Acetone has worked decent for me in the past. The trick is you have to let it soak. Acetone evaporates fast so you have to keep a rag on the glue you want removed, and continually add small amounts of the acetone so it stays wet and can work itself into the glue and loosen it.

@eblair12 Год назад

Absolute .. Patience Works on a hard surface like a boat haul.

@AwakeInAnacortes 3 года назад

Oscillating multitool with scraper blade zips it right off if the fiberglass is smooth. Unfortunately for me, my fiberglass is rough, so I'm going to have to get the last bit off with something chemical. Thanks for the informative video!

@BoatMcRill 3 года назад

Great point! I have the same issue with rough fiberglas.

@AwakeInAnacortes 3 года назад

@@BoatMcRill I thought I needed to use something chemical on the last bit, but decided to try test glueing a couple of small pieces of headliner without using anything to get the last remains of the foam backing and it seemed to hold well, I just had to make sure I saturated the foam with the glue.

@josdennis6862 10 месяцев назад

Try a combination of softening with a stone and the scraping.

@TheBigRed. 3 месяца назад

Acetone is best to use. 👍 Thinner just spread it all about. 👍

@andreastornesel8404 4 года назад

I did the forward galey with angle grinder and kemigreen glue remover, it was a painstaling job. When fixing the rear galey I Will let the kontact cement be and glue on top of it, I don't think it will do any harm (I hope)

@andreasdahlgren7714 3 года назад

Jag gör samma roliga jobb på min båt, jag använder en satineringsmaskin med mässingstrissa, funkar helt ok. Ska testa ditt tips med label off.

@bartvanderham2924 3 года назад

I used paint remover, and it worked well.😀

@BoatMcRill 3 года назад

I think that was the only thing I didn’t test. I ended up removing it with brute force 😂 (sanding and wire wheel).

@DJNITROALLY 3 года назад

will paint remover remove that sticky glue under peel and stick tiles

@teoryangaraen Год назад

In Colombia there is a liquid called "varsol" i thought It is something like the kerosene and It works so good.

@yezzper 4 года назад

Värmepistol och riktig skrapa borde du testat på sista rutan 👍

@ronaldmortensen8048 2 года назад

Helt klart det beste. Gjorde på vår Nidelv 24.

@PowellRoadDIY 4 года назад

I’m in the USA , I use a product call Goo Gone with a piece of steel wool. Sprayed the goo gone on the glue and let it sit. Then scrubbed like holy hell and it still hard came off. But I had better results using a wire wheel on a grinder with the goo gone and whipped it down with acetone

@BoatMcRill 4 года назад

Nice to have people overseas on the channel. I was a bit afraid of using wire wheel in fiberglas but might test it.

@PowellRoadDIY 4 года назад

The wire wheel worked better than anything else as long as you put something to break down the glue. Then scrap the glue off. Slow process and Labor intensive ...... but it’s all how well you what your project to come out.

@PowellRoadDIY 4 года назад

Goo Gone Pro-Power Spray Gel - 24 Ounce - Surface Safe, Great Cleaner, No Harsh Odors, Removes Stickers, Can Be Used On Tools www.amazon.com/dp/B00SPHYQXM/ref=cm_sw_r_cp_api_i_l6hOEbZJHJ1FM