What's the best product for PRE TREATING paint? 3-product showdown 

Thank you.

Excellent

Perfect

Thank you.

Or a touch of Incredible Suds in the foamer with All Clean for more foam and dwell time?

We used a capful of DIY Detail Incredible Suds in the DIY Detail All Clean . In your foam cannon 1 oz of DIY Detail Incredible Suds, 4 of DIY Detail All Clean , water for the rest

4 oz in a foam cannon

4oz in a foam cannon safe for glass?

Thank you.

Great point!

Thank you.

Thank you.

Thanks for sharing!

Good idea

Unfortunately low cost, high PH products come with risks.

@@diydetailofficial I am not a professional nor a chemist and use it sparingly. All I saying they have a similar pH and costs a lot less. Makes you think? Have a good day.

A 5 gallon pre soak from superior products is $45-55...can be dilated from 40:1 or 120+:1

Great suggestion!

Do a test, but it should be fine

If it’s oily a rinseless wash that contains surfactants will do a better job.

Excellent

Nice!

No need to change

​@@diydetailofficialhooray!

Great question, if you have a foam cannon available, 1oz of DIY Detail Incredible Suds, 4 DIY Detail All Clean , fill the rest with water. Give a quick spray with a garden hose to wet the mud, then foam.

Thank you.

Close

Good

A capful to a gallon

Just dilute rinseless in there with distilled water + a ounce of quick beads

Thank you.

Idk the ratios?🤷‍♂️ I’m dumb make a product.

@@timlehman4121 1:256 for rinseless, just make a gallon of product then add one oz of quick beads

⁠​⁠@@chrisgorgol9442That could turn out really bad for someone who lives where there are freezing temps. If you don’t get it out in time you could have a ton of broken plastic parts to replace. Doesn’t seem worth the risk and can only use 6 months out of the year.

Glad it was helpful!

Thank you, typically we simply rinse wheel wells with the pressure washer. Thanks for the tips.

@@diydetailofficial It's a good ip. Forgive the typos, but the thing actually work well. I'm on my phone all day lol. Makes the worst of days a simple wipe off.

Good

Yes, although we really love the ik foam pros because All Clean works even better when you foam it

DIY Detail Incredible Suds gets diluted 300-500/1

@@diydetailofficial ph zero for DIY and ph7 for superior. I'm sure your product works fine. Just want something with some bite.

Superior has nailed it, especially for professionals. Huge amounts of great dilutable products for extremely cheap. They've proven that a lot of detailing products are just WAYYY over priced from what they could be. But for the DIY'er there won't be a massive difference when you're only working on the cars a few times a month.

What you’re doing is fine

Thank you.

DIY Detail All Clean will temporarily scar a coating, it won’t remove it.

That’s fine

WHICH CUTS PAINT FASTER?! Rotary or Dual Action Polisher. Real-time test! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-20EnhROVSDo.html

We used 15/1

Unfortunately not, look at options that don’t require a pressure washer. I started when I was 12, and had I had access to Rinseless Wash I would have been enthusiastically using it.

Thank you.

Best to work on a wet surface

work in parts, divide the car in 2 to 4 parts depending on the weather. I usually wash the hood, front bumper and fenders, then half roof and door, then trunk and rear bumper, then the other half of the roof and right side doors

It works, but as noted is a tremendous waste of product

​@@diydetailofficialthis goes back to the ol saying "you can dig a hole with a hammer, but the question is SHOULD you?"😆

Glad it was helpful!

Stay tuned

@@diydetailofficialhmmmmmm 🤔

It can be done but will use a lot of product. 8oz

@@diydetailofficial Yeah that's what I was afraid of 😅 I need to get an IK foamer I know

Coming soon!

Yes

Foam rinse foam is sufficient

Yes, DIY Detail All Clean will help to break those down.

Definitely, the issue is finding them.

Up to 40c is fine

No

Yes, but it’s not ideal

We do release the pressure

Glad you liked it!

No problem

Yes

Wet the sponge, you want to “flood” the surface.

@@diydetailofficial thanks for the advice. should i scrub it in after? or just rinse it off with a gardenhose?

Simply dry

@@diydetailofficial you guys are the best!!

32:1 is the dilution we recommend, so if you have a 32 ounce container, make sure one ounce of that is Incredible Suds and 31 ounces is water. Use that same dilution ratio for whatever sized container you have. So it would be 30 ml of Incredible Suds (the rest water) in your 1 litre foam cannon

@@diydetailofficial Thank you 🙏

@@diydetailofficial is that a typo? Shouldn't it be 31:1? For example: 1:1 = 50% water, 50% chemical 3:1 = 75% water, 25% chemical 10:1 = 91% water, 9% chemical etc, etc. probably after 6:1 doesn't matter that much but below that it does, the first number is the fractions of water, not the total fractions of the mixed solution

Correct, one cap per gallon

No harm, not much foam.

15/1

Glad you liked it!!

lol

Welcome 😊

Thank you.

A free and clear liquid laundry detergent.

Rags to Riches by P&S is very good

Yes

@@diydetailofficial thank you

The other way around use DIY Detail Quick Beads as your clay lube, and use DIY Detail Ceramic Gloss as a drying aid, you will want to do this panel be panel.

@@diydetailofficial I saw you guys on a video spray quick beads , rinse off then use ceramic gloss as a towel lube and dry ?

Thank you.

Wash asap, use DIY Detail All Clean as a pre-treatment

No

Thank you.

Thank you.

Yes

Thank you.

No

@@diydetailofficial any chance of getting labels for my own bottles?

Not at this time

4ml/l

@@diydetailofficial is one capful 4ml?

you don't have google in Australia?

Nope

@@EmanuelRobins bummer :(

The foam cannon greatly reduces the pressure output of the machine.

1 cap is 1/2 oz

Is it bad to only use one cap per gallon or should I use a cap an 1/2 per gallon

One cap per gallon only

Correct

Absolutely! I used to do almost everything with ONR (Rinseless) and Optimum Power Clean (automotive safe APC). At least for maintenance washes you can do everything with those two at different dilution ratios, from exterior paint, bugs, wheels, tires, interior, glass (although I also like just distilled water & isopropyl alcohol from any grocery store for quick flashing on glass), etc, etc. If you use pH neutral soap instead of rinseless and an APC that is not safe for paint, then you may need to also use a special bug remover, a special drying aid, then depending on weather something like Formula 4 Spray Wax or Quick Beads to prevent water spots, among a few other chemicals. Now for actual decontamination, polishing, paint correction, and long term protection you need a lot more supplies but a lot of people hire a professional detailer for that once a year or once every couple of years while doing maintenance washes themselves on the weekends.

Good

Thank you.

No need

Thank you.

Exactly

Can I use rinseless in my washing machine to clean micro fiber towels?

@@jamieharris531 not the best use.

I wouldn’t waste DIY Detail All Clean on a floor.

@@diydetailofficialso true

Totally different products, All Clean is an APC, BH Toouchless is a straight pre wash, if you really want to compare do so with the same category products, not to diss All Clean but tested it alongside BH APC (BH Surfex HD) and Surfex destroys All Clean (no offense DIY, i still love your products), plus APC are not super healthy for most ceramic coatings when used often, i observed a decline in coating performance by prewashing it will any kind of APC (sure it depends on the coating, no DIY coatings here in Poland so i use the next best thing - Gyeon).