I know this isn't about SMP but just wanted to say that I love it! lol I just got the Bluetooth FCU and it amazing! thank you so much for making this awesome product! It really took my game to the next level!
hi Rich, on the concept of using the MB red to feed more consistently into the chamber...in theory, if you wanted a tighter lip, wouldn't it be plausible to use a higher durometer bucking? For a DMR application with a high air output and the absolute need to have a consistant feed, I have been struggling with this. And this considering you are only dealing with the lip, ie you have an Rhoped barrel providing the contact surface at the correct durometer for the application. I have tested the madbull red and I know its not supposed to be used in an inferno Gen2 (it was really bad in my testing) but more for the SMP/Gen1/Hydra. I have a full set of 60d 70d 80d reaps and was curious your opinion on my hypothesis....you know, before I go and flat hop each bucking. ty!
Was there Teflon tape around the barrel in between the barrel and bucking, on that Teflon tape mod/remedy you performed? Is this to ensure good compression?
#1 & 2 were good ideas. not too sure on the 3rd one. Even a small amount of Super glue & the Teflon tape might make it a little tough to get inside a hop up Chamber.
+NepaAirsoft We do it ALL the time. Causes no problems unless you are using an especially fat hop up bucking. If you find it's a little tight just put a dab of silicone grease on the outside of the bucking to help it slide in.
Hello Rich. Im writing to you to see if you have already encountered sides spins with a bucking like Madbull red,Maple leaf, Prometheus violet etc etc. For me iI'm a tech in one of the shoops in the europ and frankly I had to say that no matter what buckin i use i always gets side spins to the left,to the right,up ou low.We found out a way how to treat that but I would like to know as well your solution to that. Most of the time we use the Maple leaf 75 and after our moddif it works like a miracle. Thank you for your answer Sebastjan
+Wolverine Airsoft . Hey Rich. Thank you for answering me. BTW I have to say that as a tech i know when a gearbox is misaligned and the side spins happens in airsoft guns like M4,AK47,G36 and even in the M14 G&G knowing that hop up unit with the inner barrel is aligned and screwed with the gearbox so.... Just a tech for a tech-which bucking in your opinion is the best for system Wolverine,and another question -when can we except the upgrade conserning the Bletooth FCU because with my Samsung Galaxy S5 plus it does not work! Tnx and hope to hear from you soon. Stjan
Is this video still very valid for the inferno gen 2? Im having the same issues as you described in the video. I have a Lancer Gen 2 Rotary with Maple Leaf Macaron Yellow and unicorn flat nub. In my AEG it works perfect. With my Gen 2 its very inconstant nearing 3/4th of the bbs flight time. Im interested in just getting the Madbul red. I just wanna know if this is still very valid.