When To Start Finishing Concrete - Timing When To Start

Подписаться 291 тыс.

Просмотров 144 тыс.

50% 1

#EverythingAboutConcrete #MikeDayConcrete
This video is about when to start finishing concrete. The timing of when to start finishing is always the hardest thing to learn for new concrete finishers.
This video goes over a couple examples of how to check the concrete and test it for firmness. I like it to be quite firm before I start to finish.
Learn how to finish concrete and much more inside The Concrete Underground below.
LEARN FROM ME - PRIVATE MEMBERSHIP AREA:
www.theconcreteunderground.co...
MY STAMPED CONCRETE COURSE:
mike-day.mykajabi.com/offers/...
MY CONCRETE SLAB COURSE:
mike-day.mykajabi.com/pl/79570
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykajabi.com/offers/...
GARAGE EPOXY FLOOR COATING COURSE:
mike-day.mykajabi.com/offers/...
VISIT MY WEBSITE:
www.everything-about-concrete...
USE THE SAME TOOLS I DO:
36" MBW POWER TROWEL:
imp.i284638.net/oeRMmn
ScreeDemon Gas Powered Vibratory Screed:
imp.i284638.net/4ZKEL
Screedemon Battery Powered Vibratory Screed:
imp.i284638.net/LzdBo
14' Screed Board for ScreeDemon:
imp.i284638.net/QOPDZM
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything-about-concrete...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.com/form/44/2003...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
everything_...
Follow my Facebook Page:
/ everythingaboutconcrete

Хобби

Опубликовано:

7 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 94

@bartgrochowski6972 4 дня назад

Thank you for sharing you knowledge,really appreciate it!

@DAVELa-Soul916 Год назад

I subscribed to your channel because I can tell you do know what your doing and you explain how to do it very well...good job man..keep it up..been a concrete and brick guy for a long time and I still learn from ppl..I'm 44 and take pride in all I do..its good to see guys like you still exist!!!!

@PhongFoodieAdventure Год назад

Really appreciate you uploading this video! It's very detailed and you gave me the courage to pour my first DIY concrete patio.

@KeoniKoa 7 месяцев назад

Thank you Mike Day! Your videos are always easy for me to follow! I appreciate you brother!

@LuisAzcona 9 месяцев назад

The way you teach concrete makes it easy to learn. amazing pleasant video. thank you for this!

@ChrisClayton-fc5mw Месяц назад

Thanks Mike. You did very well with every detail of explanation. I'm a 20 year carpenter and started doing other projects as needing to extend porches for screened in porches clients want. Thanks again bud!

@doranflower8803 Год назад

Mike, really enjoy your concrete videos. I'm in the process of fixing the broken and collapsed concrete floor in my garage. I'm a bit out of my league but your videos sure help!

@westonedwards4353 3 года назад

Awesome video. Thanks for the education Mike.

@NINO011674 9 месяцев назад

this video is gold thank you for sharing the knowledge I learn a lot

@tongke5342 3 года назад

watching here from Philippines, awesome to watch Mike!

@nathenmunn4242 2 месяца назад

You guys are true pros! The video was very helpful. Thank you.

@FapperDan 4 месяца назад

Amazing video. Super helpful. Thank you Mike!

@tnolan3176 3 года назад

We float the surface on the first pass then trowel the second pass on patios and front stoops !! Smooth finish !!

@williamlawson2680 2 года назад

Been watching your videos for a while now. Hope to be as good as you one day man. I've recently started finishing. Timing is tough. Hopefully one day I'll have my own business doing concrete 🙏 😌 🙂

@angeloacosta9411 3 года назад

As always - You guys are doing a great job. Keep up great work !

@MikeDayConcrete 3 года назад

Thank you! Will do!

@alsdowntown Год назад

Great video & very helpful

@oscarsalazar9697 3 года назад

Appreciate your lesson, thanks.

@JonnyDIY 10 месяцев назад

Thanks for sharing Mike. Was wondering why you guys were only finishing with the mag floats on the porch until you explained it at 6:55 thank you 🙌👍

@modpup 3 года назад

Another great tutorial

@billreed3265 3 года назад

Alright I enjoy these videos.

@crazyhandshands9028 3 года назад

Nothing but the best ..

@dan33klein 3 года назад

Great video mike

@--Garbage-uv5eb 7 месяцев назад

Thx for the video I'm 19 and learning finishing but still learning to be a good one

@louis3998 Год назад

Thanks for the video

@concreteninja 3 года назад

Nice work guys Love watching your videos 👊

@MikeDayConcrete 3 года назад

Thank you, same here. I love your videos also.

@alforliniteaching5670 7 месяцев назад

Very helpful.

@darylfield9314 3 года назад

Great job I live in the UK and we do all types of groundworks everything up to the damp slab level on houses it's different because most houses are brick and blocks so deeper footing but we do have to do ring beams on bad groundwork witch is like your slabs but it's 18" round the outside or were supporting walls are and 6" in the slab middle I will say your experts at finishing them off very nice work keep it up

@T.E.P. 3 года назад

always like when you review all your points on cement ... you making these vids and repeating your points is my fav thing about the channel

@MikeDayConcrete 3 года назад

Thank you that's good feedback.

@cecilhunter8820 3 года назад

On point as always Mike, I am going to try and get back out there this year. I can't just lay down, it's been 2 years since my heart trouble. Watching you are your guy makes me want it even more.

@MikeDayConcrete 3 года назад

I hope you make it work Cecil!

@seanwilliams7774 3 года назад

Good evening sir i been watching you do concrete work and it's beautiful question what are the best sliders to buy

@untilIfeelnothing 3 года назад

Hey there Mike. I was wondering if you could do a video explaining the reason why each step of finishing is done?

@oling4238 Год назад

Well done

@xxoozyqballzzxx5312 3 года назад

You should post a video of a float finish. I’d like to see how good you guys are

@cryptocrush-823 6 месяцев назад

Beautiful job, guys!

@MikeDayConcrete 6 месяцев назад

Glad you like it!

@RefreshingArt Год назад

Thank you!!!

@helloharry1418 2 года назад

Thank you Mr Day

@MikeDayConcrete 2 года назад

You are very welcome

@SuperCOLDRICE 4 месяца назад

well done

@michiganrazorriders9749 3 года назад

Hi Mr Day, Great videos on the concrete work. I live in Michigan and am wondering about pouring the foundation walls and slab for the basement long before the build would ever start. Is this ok for the foundation or bad idea to leave it open for a year or more?? Thank you, Mike

@rmiller2179 3 года назад

Mike , wow buddy super vid. I'm not a proffessional lbut have done some small shed slabs a wheel chair ramp= and some stairs-- but sure learning a lot from you!

@MikeDayConcrete 3 года назад

Thank you.

@TheJosepi87 3 года назад

hi mike, what is the reason you need to mag it before you get on it with the power trowel? love the vids btw, cheers

@izzyc.4746 8 месяцев назад

nice video

@keithgeorge2541 3 года назад

Mike... where and how many saw cuts did you put in this slab? I would say for sure you’d put one at the patio/house transition but do you need to do any inside the house area itself?

@FranciscoGarcia-lo7gt 3 года назад

Hey Mike just couple questions when do bull floats and Fresno come in to play thank you

@diyidea3031 Год назад

nice job.

@MikeDayConcrete Год назад

Thanks!

@stag3t-muspsa910 Год назад

I noticed you didn't use any aquafilm....when using power trowl....good work fellas...

@thomasjoseph9224 2 года назад

Do you have any guidance on when you would trowel?

@slowrider30 Год назад

I am in the South and we are working on a driveway for my home do we need to hand trowel with a magnesium float as well as bull float it? Also how long should we wait before we drag the finish broom?

@ceciliachan4361 2 года назад

If I was to pour a small retaining wall among with a slab. How long should I wait before I take for forms of the retaining walls off before I can trowel the retaining wall? Thanks

@GlenJowers-mw5ti 10 месяцев назад

Hi Mike I’m from the uk your jobs are quality so you just mag finish before stamping or do you steel finish the Crete? As I’ve Hurd stealing it can course slippage

@ivanov568 7 месяцев назад

Does your course/membership also include grading, site prep, and permitting? I am thinking of building a little shop/paint booth for my business but it's commercially zoned

@billyflanagan9657 8 месяцев назад

I live in Ireland I need to pour a 21×8 foot slab what finishing tools do you recommend and what type of concrete would you expect here it will freeze some nights. Thank you

@letters5187 Месяц назад

Can anyone tell me more about the "slurry" ? I only seen and heard about it once bc my job only does concrete a couple times a year. Thanks

@bb67572008 3 года назад

Mike what would it be like if you poured , screeded, and broomed but left out finishing would it turn out bad ?

@astropower3534 Год назад

Hi Mike what’s the basic to learn concrete finishers. Like Screed. Trowel , Magnesium floating. Corner edge The concrete is hard. What’s the trick. To be a concrete finisher I would yo learn please some advice and tips thanks

@eleazarmartinez2697 11 месяцев назад

If it’s getting a broom finish do I still have to go over it with a finishing trowel after using my mag

@jesusespin9941 3 года назад

Need help please, im starting to work on my own, ive got 9 yards to pour on a driveway any sugetions? Can i do it without power trowel?

@danielhill3220 2 года назад

Do you guys only finish slabs or do you also do frost wall? Doesn't look like this house has a frost wall at all

@wyo1234 7 месяцев назад

Does it look acceptable to just use the bull float as the finish? I'm planning on building a shop and don't really have much experience with concrete.

@byrny111 Год назад

Do you trowel the lines left from edging?

@Whacked. 2 года назад

Also if you have additives in your mix, like Hot Water, 1% or 2% delvo or high early

@dublinsbanking 3 года назад

Hey mike I've been following your page for awhile now. I've got a question. See, I have a few walkways and small patios lined up and want to start my own flatwork company. My problem is that these jobs I've been offered only need 1 or 2 yards of concrete. I'm battling minimum load orders here in rhode island and most electric mixers only take a bag or 2 at a time. How can I get around this

@MikeDayConcrete 3 года назад

You have to build the minimum order charge into the quote. Us regular contractors would do that. Then the pour is much easier and faster. If the customer wants it done they will pay, you shouldn't worry about that, it's the cost of doing business on those small jobs.

@dublinsbanking 3 года назад

@@MikeDayConcrete agreed. Thank you!

@kipcarroll5644 3 года назад

What do you think about the Traker concrete cutter ?

@MikeDayConcrete 3 года назад

I haven't used it yet. Maybe they'll send me one to try.

@mario378378 2 года назад

I do the same for 20 years

@diyidea3031 Год назад

if I don't have magnesium float . I made 1 from Oak , not strong enough angels , but still tool. And I have home made bull float 3mm aluminium plate 1.2mx 0.3m working good . what can I use like magnesium floats Magnesium cost 40- 50 $ don't have money gor it now

@jaybeastn604 Год назад

PLEASE HELP! Why does every time I edge , it feels rocky and never smooth? I’m almost hitting rocks and doesn’t feel creamy .

@SEEKNDEZTROY 7 месяцев назад

❤️❤️❤️❤️❤️

@jeffriggins9106 11 месяцев назад

1:28 that edge xD, poor fellers never lifted the line

@bubba9482 3 года назад

I learned this the hard way. 25 years ago when I was an apprentice finisher, I scrubbed basement floors until my knuckles bleed. Sounds barbaric, but it was a lesson never forgotten. When the concrete is white and crusty, you're in trouble.

@aarongrabowski3775 3 года назад

Yeah no doubt. U didn’t have a power trowel? I know i have had some real close calls. Never lost one, but i have had the shit scared outta me me plenty of times.i remember this one job. Mid summer, no shade around for 500 yards, i had my brother sitting on top of the power trowel while i ran it with float blades because the shit was on fire. The extra weight helped to bring up some cream and puch the aggregate down more that if i used the machine without the extra weight on it.

@bubba9482 3 года назад

@@aarongrabowski3775 No machine these were the early caveman day, splash and dash. We did everything wrong, because we didn't know better. Learn from your mistakes. Off course I've had plenty of close calls since. A good finisher is part chemist, part cowboy and part asshole. We like to use cc to it's full potential.

@toddgoldberg7240 2 года назад

LMFAO

@toddgoldberg7240 2 года назад

Absolutely, timing is everything. You can work the concrete or it can work you!!!

@randalllundeen5050 10 месяцев назад

J😮j

@landonmorel3715 2 года назад

question for Mike: have no problem finishing a broom finish patio….but if we have steps we always struggle to get them done and they set way too fast for us…..any tips? thanks

@JamesAnderson-kd2eo 2 года назад

Wreck and finish sooner or use confilm / retarded to keep them from setting as quick

@landonmorel3715 2 года назад

@@JamesAnderson-kd2eo use retardant already, just seems like they always set up on us faster than a patio

@JamesAnderson-kd2eo 2 года назад

@@landonmorel3715 get some confilm, spray on forms right as you are pouring steps and once they are floated in spray on the treads as well. Keep a spray bottle w you and use as needed once you start finishing them

@aarongrabowski3775 3 года назад

What brand is that power trowel?

@MikeDayConcrete 3 года назад

That was a Whiteman.

@aarongrabowski3775 3 года назад

@@MikeDayConcrete oh. Used to seeing them in that teal color. Good machines. I dont care for the ones with the quick pitch though.

@jessoftherocks 7 месяцев назад

I do not miss the 100 degree days in a basment 3,600 foot floor, with two other guys. My knees and my back did not appreciate this.

@johnnygreenshirt6215 3 года назад

Iv'e been laying and supplying concrete for 33 years using Volumetric concrete trucks. Dunno how I come across this you tube video. The slurry you are taking of we call it "Fat"