Which 22 long rifle ammo works best in TX 22 

My TX22 was very fickle initially despite so many people saying to eats anything. After 300+ rounds it’s finally working well. Expect the odd stove pipe and routine failures to feed until the gun is broken in. Thereafter, you can test what ammo works best. Don’t jump to conclusions too soon.

My TX22 runs the Winchester hollow points just fine in fact it runs every 22 ammo that I've ever put through it but mine's well broken in

Thank you for the valuable information!

You are exactly right. First time with my TX22, shooting 200 rounds. Three boxes of copper, flat 'hollow points' and one box of round lead. Had three Failure to Feeds with the flat hollow points which caught on the bottom of the feed ramp. NO problem with the round lead. Round tipped ammo for my TX22 from now on.

Thanks!

Thank for the video

I so far hate my tx22. Non stop failure to feed. Tried cleaning, dry lube, making sure the spring isnt too tight, on both mags. Gonna try new ammo to see if that helps. I was using the remmington gold bullets and the bullets spin in the casing. Beautiful lmao

My TX22 chokes on Remington GB - had 16 failures from one 50 round box! Loves Federal.

Good video. I had a half of dozen or so with Winchester M22. I shot about 400 rounds roughly.

I use CCI Mini-Mag..22LR. Works perfect! Round nose cop[per plated.

After about 300 rounds break in and a good magazine cleaning and dry silicone lube my tx22 runs everything I've put in it.

Remington Thunder Bolt gets a bad rap, but in my GSG it is flawless! May not always be the most consistent in velocity but feeds flawlessly in my gun. When I was able to buy 500 rounds for $20 it was a good choice. Just my 2 Cents.

I have more misfires with winchester super x.....my gun loves the cci mini mags.

Mine shoots any kind of ammo you should try to take apart your mag and clean it

CCI runs perfectly in my TX22. It runs all ammo well I've had no issues in two different TX22 s. Seems like we have a different opinion. That's alright.

Just finished up 4 200 shots from my TX22. In a first 250-300 shots, multiple feeding issues. After that: zero feeding issues with with ANY ammo! Also, many misfires with Federal Automatch due to bad quality of this ammo - like almost empty shells etc. Hate them. Plus, this was horribly dirty. Absolutely worst ammo for TX22. I tried all you show here and much more - Federal bulk blue bricks, CCI Stingers, Blazers, Federal Punch, Remington Thunderbolts, all types of Aguilla, Norma etc.

Is there any possible tool or jig that one could use to round out the tip of the winchester, like a pencil sharpener.

Mine has over 2000 rounds it shoots any ammo a hat I put in it NO FAILURES

are those CCI hollow points good for the tx22? i bought some today but havent tried them out yet

My tx22 runs it all flawlessly