Which Liquid Works Best in the Glitter Glass Snow Globe Tumblers | 4 Different Methods | KCC Glitter

Подписаться 37 тыс.

Просмотров 38 тыс.

50% 1

Thank you for watching this tutorial on what liquid I liked best while filling Glass Snow Globe Tumblers with glitter! Check out my previous tutorial on how I sublimated the glass snow globe tumblers with a tumbler press! The awesome heat press that I use can press 160z, 20oz, and 30oz straight sublimation tumblers, and can press the 11oz, 15 oz sublimation ceramic mugs, and many more! I hope you enjoy!
KCC Glitter - kccglitter.com/
EENOUR Tumbler Press - amzn.to/3tnvAvE
DISCOUNT Code: BYHNLCNS (10% off for green), 9R6JDHGO (10% off for purple)
Please join my Facebook community! / epoxytumblersandpens
linktr.ee/kris...
Buy me a Coffee 💕 No pressure at all but if you would like to help support the channel and the tutorials I create, you can use this link to leave a tip. 💕 www.buymeacoff...
Products used/recommended:
EENOUR Tumbler Press - amzn.to/3tnvAvE
UV Resin - amzn.to/3hcKzUA
UV Nail Lamp - amzn.to/33p898i
Finger Cots - amzn.to/3qprjo0
220 Grit Sandpaper - amzn.to/3rYKC9j
EcoTank ET-15000 - amzn.to/3xDqWKL
Sublimation Ink - cosmos-ink.com/
Vevor Heat Press - amzn.to/3SOelia
Vevor Hat Press - www.amazon.com...
** Vevor Hat Press Coupon Code - 40B073LQ8XW5 **
Sublimation Trucker Hats - amzn.to/3L3T4Os
Shirts (only use Heather colors) - www.jiffyshirt...
Heat Tape - amzn.to/3hywn82
Tape Dispenser - amzn.to/3hy3xVf
A-Sub Paper - amzn.to/3ebwWSX
S-Race Paper - amzn.to/2UOb3mc
Silhouette Cameo 4 - amzn.to/3oaC9id
Flynn Sister's Epoxy - www.flynnsiste...
Tumbler Supplier:
MakerFlo - bit.ly/3RQMflM
About me: I have been making epoxy tumblers for approximately seven years and have decided to share my methods with aspiring cup makers. Everyone's methods are different and I just want to share what I have found to work best for me!
Please feel free to comment if you have any questions at all! Below is a list of links to some of my favorite products that I use the most to make my tumblers.
If you enjoyed my video, please give it a thumbs up and hit the subscribe button to see more videos like it!
Connect with me on Social Media!
kristicustomcreations
kristicustomcreations
Video music from Epidemic Sound, you can try a free 30 day trial by using my link! www.epidemicso...
*Disclosure: I only recommend products I would use myself and all opinions expressed here are my own. This description box may contain discount codes and affiliate links that at no additional cost to you, I may earn a small financial benefit. As an Amazon Associate I earn from qualifying purchases. This helps support my channel so I can continue to provide you with inspired and focused content. Thank you.

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@bless5xs283 Год назад

I always add my liquid first, about 1/3 of the way up, then add glitter. Finish filling with liquid and wahlah! Less bubbles ☺️ beautiful cups hate you had to pitch a couple.

@Deangirl86 Год назад

I used the Elmer’s magical liquid mixed 2/1 with majority of it being distilled water. It lets the glitter stay suspended longer than 50/50 glycerin/distilled water mixture.

@KristisCustomCreations Год назад

I had the Elmer's magical liquid too but I only had 4 glasses to play with 😂 I would like to give the magical liquid a try soon tho! 🥰 Thank you! ❤️

@kyleelind5969 Год назад

This is what I tried the first time too and liked it! Gonna try contact solution next

@andreadelcid6287 Год назад

So 2 parts distilled water 1 part magic liquid?

@jeangrandy8672 8 месяцев назад

What is Elmers magical liquid? What are the measurements for this mixture?

@amtodd85 7 месяцев назад

Thank you so much for this

@gailgorenflo3501 Год назад

I tried the Elmer’s “magical” stuff and distilled water. It did bubble badly also. It’s really thick. I let it sit and gas off overnight but the bubbles didn’t go anywhere. After watching a few more RU-vid videos that recommended spritzing the bubbles with 91% alcohol, I thought I give it a try. . It totally worked. It’s been about 2 weeks and you can shake it and the bubbles don’t come back. It is a very dense solution so it moves very slowly and the glitter stays suspended , which some people like because when you have your drink in your tumbler you can’t keep shaking it. I think there might be a correct proportion of water to glue that may make it work great. Just not sure what that is yet. Thanks for doing the video. I love these comparison videos. It give us options!

@manmeals441 8 месяцев назад

Sounds like 40/40 water/glue and 20 alcohol:)

@catstazz1 Год назад

I use 2 tbls for every 1 cup of water, have never used the contact solution but I will try after watching this video, thank you for this informative video I love it.

@michellephillips8584 Год назад

I like the eye solution! No mixing lol

@glitteringthecoast Год назад

These are beautiful! I had struggled with filling the hole so I gave up lol. I’ll try again after I sublimate!

@KristisCustomCreations Год назад

Thanks! I have a kit that I bought from resin rockers that I'm going to try next for plugging the hole.

@shirleyotero1846 9 месяцев назад

I've use glycerin with fine glitter in my snow globes and it worked beautiful Thank You for showing us.

@tracygee Год назад

No idea what you did with the glue mixture. You have to put a bit of straight distilled water in first, THEN the glitter, THEN the glue mixture.

@KristisCustomCreations Год назад

Good to know! We mixed the glue with distilled water which is what we thought we were supposed to do. Then we put glitter in the tumbler and the mixture into the tumbler. That obviously didn't work so I definitely appreciate the advice!

@tracygee Год назад

@@KristisCustomCreations Yeah, getting the glitter wet with distilled water before pouring in the glue/water mixture will keep it from sticking at the top of the glass.

@KristisCustomCreations Год назад

@@tracygee thank you! 🥰

@Dainty213 10 месяцев назад

I have contact solution that expired and it’s brand new still sealed. I felt bad throwing it away, glad I now have a use for it 😁

@49erfaithful16 Год назад

Out of all the videos ive watched on how to make these cups yours is my favorite, simple easy directions, great video

@KristisCustomCreations Год назад

Aww! Thank you so much!!! 🥰

@brookemcquiggan6781 Год назад

Beautiful job I'm gonna try ur method thanks for the video 😊

@KristisCustomCreations Год назад

Thank you and thanks for watching! 🥰

@TraciCantin 2 месяца назад

How pretty! I cannot wait to make one. Please give me the link for the cute stickers!

@kcampbell4086 Год назад

Hello i wonder how it different it would be with the glue mix if you put some of the liquid in the cup before the glitter was added maybe can be your next video? 😉

@nancykaniewski1098 Год назад

Try putting some of your liquid in before glitter. Some have said it keeps glitter from clumping at the top.

@xMicXMic Год назад

This is the most helpful video everyone just mentioned the glycerin heh forget that!!! The contact solution is a perfect choice!! I'd love a video where you test coloring the solution with mica powder and also adding polymer bits to it. You helped me so so much with this thank you!

@AmyBrouer-w8u Год назад

add your liquid first about a half to an inch.. also i use elmers clear glue and elmers magic

@rosalindalozano233 9 месяцев назад

This video was so helpful! Thank you. Any chance youve successfully shipped a finished glass? Do they ship well?

@KristisCustomCreations 9 месяцев назад

I'm so glad you found it helpful! ❤️ I did ship one glass tumbler. I made sure to put lots of padding around the glass and it shipped just fine. 😊 I would recommend making sure that it has insurance on it though because USPS can be so rough with packages.

@Queenieb03 2 месяца назад

Thanks for the video 😊 Timestamps: 0:21 - eye contact solution 3:43 - baby oil 6:35 - Elmer’s glue 10:43 vegetable glycerin

@KristisCustomCreations 2 месяца назад

@@Queenieb03 thank you for the time stamps!

@angezprofile Месяц назад

I used glycerine and water and it keeps clumping

@loriquilling-heidt5121 8 месяцев назад

Add alcohol to the glue distilled water mix. Cuts bubbles - use less glitter when you start

@kendraniquescreations5952 Год назад

I use the Elmer’s glue…bubbles oh yes lol I watched lots of videos and they said to degass for about 24-48 hours. I love the way it flows. Fine glitter is the devil. It clumps really bad in the glue.

@manmeals441 8 месяцев назад

Just a thought...40% water, glitter, 40% glue, 20% alcohol. Shake!

@shannonericksen1291 Год назад

If you mess the tumblers up you can shake the liquid and glitter out into the trash. Then keep rinsing until everything is gone. Then i do an alcohol rinse after dawn dish detergent

@southernmimi8145 Год назад

Oh my goodness you never cease to amaze me!!!! I absolutely Love these Gorgeous tumbler’s! You always make everything look so easy your just so flipping talented!!! And the sticker’s for the bottom of your tumblers are Beautiful… soo classy! I always get so excited when you put up a new video, bc your Creation’s are Always Gorgeous! I hope you are doing good, and As Always Blessing’s to you my Beautiful friend!🥰💗🌸

@KristisCustomCreations Год назад

Aww! Thank you so much! ❤️ I definitely can't take credit for the stickers on the bottom of the cups, that is all Kari with Critter Cup Customs.. she's so talented!!! Blessings as always Mimi! ❤️

@carleecapone9302 Месяц назад

How do you create the hole and seal the hole?

@KristisCustomCreations Месяц назад

@@carleecapone9302 I buy the cups with holes already in them and seal them with uv resin 😁

@hobbykarinsideeen 6 месяцев назад

Wow nice❤

@carolbeyer1002 Год назад

I agree with the previous post "The Elmers Magic Slime" works the best for me.

@KristisCustomCreations Год назад

Thanks! I have some, just haven't been able to make any with it yet. I'll try it next! 🥰

@tamijohnson9870 7 месяцев назад

Love these!! new to your channel where do you get your tumblers from?

@angelfishopie77 Год назад

I just ordered the kit before I even saw your video … can’t wait to try to UV resin …. And molds … ❤

@pamelaharper756 8 дней назад

Pity you had to waste the transfer as well. Best to put that on last?

@DesyMarie 8 месяцев назад

For some reason I got a lot of bubbles at the top that moves depending on how my cup is sitting when I used the contact solution, any tips?

@KristisCustomCreations 8 месяцев назад

Try tilting the cup and fill in the bubbles with a syringe. You want as little air as possible in there before you seal it up. :)

@Kathy-Carr Год назад

Wow! Thank you for doing all the testing! Much appreciated. 💐❣️. P. S. Doesn’t the contact solution make the glitter settle quicker than the glycerin or baby oil? Thanks again! 🌻

@KristisCustomCreations Год назад

Yes, It settles and moves a lot faster with contact solution. The glycerin and baby oil is a much slower settle.

@aissiamosley4338 7 месяцев назад

How did you get the hole at the bottom? I'm new to all of this, and my family challenges me every time.

@KristisCustomCreations 7 месяцев назад

The cups actually already came with holes in them. 😊 Since making this video, I've been ordering my glass globe tumblers from Stainless Steel Depot and they are great.

@shelbyslaughter 2 дня назад

Where do you get your wraps from?

@yelahm4084 Месяц назад

Baby oil isn't good for that either

@SierraleonaWallace 8 месяцев назад

Hi I like your videos but let me tell you about me My name is Sierraleona but for short it’s Sierra in the Covid I had a Stroke and I went blind in my left eye so know I want to work but I can’t right now however I started liking the Tumbler I’ve even ordered some and I tried to make one but now I like In your video I like the last one I just need to know what is it again.

@marianitaravelo3922 9 месяцев назад

Hello, can you share the best place to order the double glass libby cups?

@KristisCustomCreations 9 месяцев назад

Hello, I have recently bought some from Stainless Depot and they were great quality

@KustomBreezee Год назад

how did u get the hole in the glasss with out breaking it

@KristisCustomCreations Год назад

The tumbler came with the hole already in it.

@jessicakaiser9651 5 месяцев назад

Thank you I have been wanting to make some I now will I have everything I need would love to send you p pictures when I'm done

@Michelle-tz6nu 3 месяца назад

You should add less glue. Try lower down your glue ratio and add more distilled water. Some people like slow effect.

@lovelyladyd3883 6 месяцев назад

I'm getting ready to try my first snow globe tumbler. Do you recommend fine or chunky glitter?

@latresastateman985 9 месяцев назад

I have a question. My snow globes came with a sealer. I see that you used silicone did you do that for appearance purposes or is it best not use the seal that came with it.

@KristisCustomCreations 9 месяцев назад

You can use the seal that came with it. The ones I originally ordered did not come with seals, that's why I didn't use one. I have used some since making the video that came with seals and they worked perfectly.

@latresastateman985 9 месяцев назад

Okay Great thanks so much. Do you seal it with uv resin after you put it on?

@KristisCustomCreations 9 месяцев назад

@@latresastateman985 you're welcome! Yes, definitely seal it with UV resin after plugging it

@debbie2009 5 месяцев назад

What brand name for contact solution

@KristisCustomCreations 5 месяцев назад

It was just a cheap Walmart brand contact solution.. I think Equate

@nicolecomer5028 8 дней назад

A funnel wasn’t an option?

@suzannegingras7528 6 месяцев назад

I was wondering if you would know or anyone if lens cleaner would work?

@jamievanwagoner3754 Год назад

So thankful I found this video! I just tried my first snow gloves with glue/water and had the same problems! I thought it was me! 10:13

@KristisCustomCreations Год назад

It definitely wasn't you! Lol. Reference the glue / water, I've had a few suggestions saying to add some water before adding the glitter and that it helps. I found that I like glycerin/water and contact solution best So I probably won't be trying the glue again. Lol

@jamievanwagoner3754 Год назад

@@KristisCustomCreations I did that and still no luck. I think the mix is too thick and the glue binds the glitter and the glitter can’t break free.

@KristisCustomCreations Год назад

@@jamievanwagoner3754 good to know, thank you! I'm definitely gonna stick with what works for me! 🥰

@lashandracorley714 5 месяцев назад

Are you using the baby oil only or mixing with water?

@moniquemoss626 Год назад

Good night do I have a link for the person that does your label they look very nice

@KristisCustomCreations Год назад

Thank you! A company on Etsy called GiftmanUK created it for me but I don't think they are still selling them on there, I had it made a few years ago. There are plenty of companies on Etsy who can make awesome logos. 😊

@moniquemoss626 Год назад

@@KristisCustomCreations thank u for the reply

@KristisCustomCreations Год назад

@@moniquemoss626 you're very welcome!

@carollaporta9669 6 месяцев назад

I used glycerin and water not sure it works well

@patricialara2722 10 месяцев назад

How do we make the hole on the cup

@KristisCustomCreations 10 месяцев назад

The snow globe glass tumblers come with a hole already in the cup

@manmeals441 8 месяцев назад

Why wouldn't the tumblers come with a plugs? That's weird.

@KristisCustomCreations 8 месяцев назад

I have no idea why that particular one did not come with plugs but I haven't bought with that company since then. I have ordered glass globe tumblers from stainless steel Depot since making this video and they all came with plugs.

@HAL-2023 8 месяцев назад

Thank you! I have been looking a long time for somebody to show me how to make the shimmery liquid process. Just got some contact solution and glitter today. Starting on some snow globes. I’ll have to show you picture when I’m done:)

@KristisCustomCreations 8 месяцев назад

@@HAL-2023 I would love to see how they turn out when you are done!!!

@AmysExquisiteGifts Год назад

Great video!!! Where did you get your tumblers from?

@KristisCustomCreations Год назад

Thank you! The Tumblers in this video came from a random company I found online but I did not care for them because they were all different sizes from each other. I ended up buying more from the stainless steel depot and I was much happier with the ones that I bought there.

@AmysExquisiteGifts Год назад

@@KristisCustomCreations thank you. I ended up going to the stainless steel depot. Thank you so much for commenting back and the video content.

@KristisCustomCreations Год назад

@@AmysExquisiteGifts you're very welcome! 🥰

@shay344344 4 месяца назад

Can anyone tell me where she got the cup from

@whipitmyway 2 месяца назад

Amazon

@tinashepard1176 Год назад

Use Elmer’s magical liquid. I like all them except the glue one. Where did you get all your decals?

@KristisCustomCreations Год назад

Thank you... I actually had Elmer's magical liquid but I only had 4 tumblers so I didn't try that one. Lol. I got my images on Etsy.. they are digital files that I sublimated on to the glass. In my previous toutorial where I sublimated the tumblers, I have the links to the Etsy listings in the description.

@lettsgav001 Год назад

a spray of Alcohol will pop the bubbles.. when using the glue method poor some of the solution in the tumbler first.

@KristisCustomCreations Год назад

Thank you 🥰

@lettsgav001 Год назад

Pour.. not poor.. LOL!! thats what happens when I don't have a light on when typing!

@KristisCustomCreations Год назад

@@lettsgav001 🤣 I knew what you meant. Lol

@barbcoughlin6517 Год назад

can you use fine glitter in these or is better to use a chunky glitter?

@pinkrain96 Год назад

Better with chunky. Fine glitter clumps.

@adalinehoernemann8512 Год назад

'promo sm'

@mrsravenrose2u Год назад

Are contact solution and saline solution the same for tumblers? I have been struggling HARD getting my glitter to flow. I’ve tried probably 4 different “recipes” and ruin all 4 tumblers 😢

@KristisCustomCreations Год назад

I don't think it would be considered the same thing. I find that using the Walmart brand of contact solution, which is pretty an inexpensive, is what I like using best. Which recipes have you tried so far?

@mrsravenrose2u Год назад

@@KristisCustomCreations the Elmer’s magic liquid, clear glue and water, water and glycerin (once equal parts and once 1 part water to 3 parts glycerin), and mineral oil.

@KristisCustomCreations Год назад

@@mrsravenrose2u oh okay, probably give the contact solution a try. It has been my favorite out of all of them. I think you will probably find it works a lot better than some of the other alternatives.

@mrsravenrose2u Год назад

@@KristisCustomCreations thank you. Walgreens has 24 Oz on sale buy one get one half off. I’ll get some tomorrow and let you know how it goes!

@KristisCustomCreations Год назад

@@mrsravenrose2u Yes, please definitely let me know how it goes!

@Alpha_DTF_Print 8 месяцев назад

💡 @‌AlphaDTFPrint invites you to explore their latest post, diving into the creativity of DTF printing on military tees. Share your thoughts on using uniforms as a canvas for self-expression! 🎭 #DTFprinting #AlphaDTFPrint