WHICH ONE IS BETTER ? 

This video cleared so much confusion for me. Thank you so much!

The one on the right

training duration is a very poor benchmark, since hwfly-nx continues for 50 successful boots, and China fw changes it with every revision, last I checked was 20

Right side. I like simple style.

I just installed my V5 modchip (I think 5.4 said on the Bord) on my new OLED. The V5 came with hwfly-nx preinstalled (haven‘t looked for the version) Training was super fast. About 15 seconds with my Samsung EMMC

Hey sthetix, been following you back when you put some tutorials about sxcore and still nice to watch your contents. I was wondering if I can flash my SXCore and SxLite chip with the provided files (HWFLY_NX-0.7.1) ? thank you in advance man

I understand correctly that what you call stock firmware is spacecraft?

2 seconds difference on boot practically works the same...

Very interesting thank you Buddy

Do you use the same Hats pack for the V6 as well?

Why on my NO SD srceen no show me the battery percentage and version 😂

Hi, I bought my Oled switch premodded so I don’t have the micro usb connector that you show in 15:35. Do you know the name of that piece so I can buy it? I would like to flash my chip. I had updated system firmware to 16.0.1 and the chip stopped working so I want to flash or retrain the chip.

I have a problem, my chip sometimes starts in OFW even though the led is green.. it turns on and the green led is pulsing green, do you know the reason?

When I press vol + and power button my mod chip flashes green once and then stops, I'm trying to view the train information but it can't communicate with he mod chip

bossku,my oled chipnx is r0.30 version.that's my question how to upgrade the firmware throught the chipnx menu? since it unselectable.

Please make new hats pack for os 15. Thank you

now do fuse!

How better on or off hos?

Which FW would you recommend I'm new to this and have a Samsung EMMC Switch Oled

hello my friend i have a problem with miy switch v1 chip picofly but no boot atmospher say : failed to get tsek key

What is the modchip training?

Hi sir can this firmware used for flash instinct nx v6 ?

Maybe tutorial on pico fly

2nd😂😂😂

Excuseme i have a switch oled with the chip oled hwfly, worked fine but Now i need yo force the turn off cuz the consol Frezee, and Now don't turn no the chip only flash purple light ando the turn in Orange and turn off... Can You help me

you left your console ID at 08:28

ada jual chip hwfly nga gan hehehe?

V6 instinct NX is best

First !!!

i dont have any modchip menu

Welp I have no choice anymore as I put the USB cable in the wrong way😅. Stock firmware it is!

No sd is soooo satisfying when you first install a mod chip

need some blur @11:55

Hello! I followed you ever since your 3ds hacking videos and always use you are reference when I need informations for these types topics :) I wanted to buy a switch but I first wanted to know what were the newest hacking methods and if there were some models that aren't hackable (so I could avoid buying something I couldn't hack)? Thanks in advance and have a wonderful day!

Hi can I flash a genuine SX Chip to the new CFW Hwfly-NX??? I will no troubles??? It is possible that? Thanks in advance for Answer me

Ofcourse we cannot ignore that you blur everything irrelevant out, but leave the console serial number at 8:29 lol.

Brown Dorothy Davis Linda Hall Shirley

great video well explained

11:37 or you can also just use the hekate auto HOS off

Hi man, i would like to modchip my nintendo switch oled for the first time. What tools do you suggest to buy to perform and to obtain the same result like your videos? (an amazing work btw) you can send link for the products so i will have an idea. Thank you so much

Please help me! I have NO SD CARD and my firmware is 0.24! How can I uptade it? It does not start Hekate…just NO SD CARD screen.

Hi @sthetix How can I reset the train data on switch lite? I can't find the 2 pin to ground on the modchip

10:10 , there is way to disable it? when i turn of the console from OFW, after 15s it come back to on, same with both flash fw (HW or STOCK)... Thanks very much , if i flashed the HW, there is way to disable it ?

I reflashed the stock firmware 🚀 v 0.32 and I see that it boots way faster than the hwfly-nx 0.7.2... As I had noticed after flashing the hwfly-nx that seemed to be considerably slower. With the stock fw🚀 it takes 0-2 seconds to boot the console while with the hwfly-nx it takes 3-5 seconds in my case. This is on a Mariko v2 switch with Samsung sysNAND 😊 Maybe with skhynix sysNAND the hwfly-nx works faster. In my case I'm staying with the stock one! 🚀

Bought an oled pre-modded. It's got an unknown version of hwfly-nx firmware installed on the chip, I can see the black "hekate - IPL NO SD CARD" screen when I turn it on without a SD card, and from there I can press both VOL + and VOL - to boot OFW. Thing is, when I power the console on by holding VOL +, the green light does not stay on (looks like it does not enter DFU mode). Is this something that could've been disabled by whoever installed the chip? Is there a way to reenable this functionality? I'd like to be able to retrain the chip using the hwfly-toolbox when and if the need arises.

Hi friend, any way to boot to hekate without removing micro sd card, I set autoboot to emunand,I tried to hold vol - and power but it boot to ofw, mine is stock fw. Thank you.

Idk if it’s possible but can you flash the modchip with a Chromebook?

How do I figure out which is the best Version OLED Switch modchip currently? I have an OG Switch with Atmosphäre on it… ai really want to install a chip on my OLED

Would I get banned if I only use the official firmware with a chip installed?

Hey sthetix! Do you have instructions for installing exactly the same chip as on the initial screen of the video for OLED? Thank you!

I just flashed the HWFLY-NX 0.7.2 yesterday on my Mariko with Samsung emmc and I see that it glitches considerably slower than the original firmware with the rocket 🚀 screen... The stock firmware with the rocket screen was booting the console much faster in my case. I just flashed the HWFLY-NX because I wanted to have the possibility to bypass the chip at the beginning to boot directly into the OFW without having to launch Hekate so that I can play the original games I have purchased from the Nintendo online shop. Also with the stock rocket 🚀 FW the console was not turning back on after Powering it off from HOS... Each fw has it's pros and it's cons... For me it is essential to be able to bypass the chip at the start to be able to use the SD card with my purchased games, something that the stock fw 🚀 cannot do.

I have a question regarding install the android, I just check my modded switch lite, it show "no sd" and bottom right show R0. 32 and H2. 0, some people told me I need to upgrade firmware so that I could install android

Borneo flasher From zero to Hero

My switch has (hwfly) they unlocked it and everything, but when it is turned on in stock or atmosphere mode, the console shows the logo and turns off, do you know what it could be? They tell me it's a backup problem

Can we install HEKATE to RP2040 chip? I'm amateur sorry :(

Can we flash the chip without removing it from the switch? Edit: I mean replace spacecraft NX with hwfly by using the built in flasher/updater of spacecraft NX tools so I don't have to open my switch(one screw is stripped and hard to open 😔)

First

Very usefull bro🙂🙂

How to boot menu for Nintendo v2?

Do not manage to understand what is the functionality where when you turn off the console restarts or turns on after 15sec. Can you explain what is its usefulness?

Your'e voice is dope Perfect Radio, tutorial, TV Voice