Whirlpool Cabrio Dryer Heating Element Replacement and Whirlpool Cabrio Dryer Troubleshooting

Подписаться 310 тыс.

Просмотров 234 тыс.

50% 1

Many newer-style dryers from Whirlpool (who also makes them for Maytag, Kenmore, and possibly Amana too) disassemble much differently than their older style console-top dryers. If the unit does not heat, taking them apart isn't too terrible to do, but there are a few things you want to look out for on this style dryer to troubleshoot to see what's going on.
One of the MOST IMPORTANT things you can do when troubleshooting is buying a decent multimeter - even the cheapest one out there will tell you if the part works or not (but a good one makes it more accurate and easier).
For parts on this style dryer, the "Clamshell-Style" heating element is actually, secretly, a Samsung element which may be cheaper. I usually buy these to replace them as they are cheaper: amzn.to/3y5RPXA
Your Dryer may have broken down due to a dirty/restricted vent - clean the entire system with my Appliance Cleaning Kit! bit.ly/3zQGFYK
DISCLOSURE: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission.
Affiliate Link & Earnings Disclosure: bit.ly/3oXeu3B
If you need to buy an appliance part to fix your washer, make sure to use Appliance Part Pro's model lookup system to get the EXACT part you need, to ensure it works - plus, you can return it if it doesn't fix your issue: bit.ly/3pVxWyX
Tools I use in all videos can be found at my Amazon Idea Page: www.amazon.com/shop/bensappli...
Did this video help you out? Send me a tip, and help me make more Appliance Repair videos for people to watch for free!
PayPal: paypal.me/BensappliancesYT?lo...
CashApp: $BenjaminSchlichter
Video Timeline
Intro: (0:00)
Multimeter Test for Voltage: (1:43)
Removing Top to Access Control Board: (2:45)
How to Open the Cabrio Dryer: (6:35)
Heater Components & Inside Dryer: (10:15)
Thermistor Testing & Value Chart: (12:30)
Dryer Heats But Doesn't Dry Clothes - Cleaning Blower Housing: (15:25)
Testing Heating Element and Sensors: (16:25)
How to Remove Heating Element: (22:05)
Other Things to Test if This Video Didn't Help: (25:59)
Putting Dryer Back Together: (27:14)
Outro Discussion: (28:42)

Хобби

Опубликовано:

28 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 255

@sboy1955 Год назад

Thanks Ben, after thoroughly cleaning the exhaust vents inside and under the house (no help), I was all ready to order and swap all the parts out on my 8 yr old Cabrio but when I took the front off I was shocked to see all the huge gobs of lint clods that had grown on inside the plenum intake (other side of the lint screen). So after a thorough cleaning of that area I decided to put the dryer back together and see if that might have been the problem!? And YEP, that was it. The heating coils started working again and the check vent light never came back on. My wife says I am the man! But really Ben is the man!

@JohnSmith-ld1pw 2 года назад

Thanks for the video. It makes me want to throttle the design engineers at Whirlpool. The Whirlpool I just replaced was over 25 years old. To gain access to the heating element I just had to remove 8 or so screws on the back panel. I then had access to the entire heating system to check/replace the components. Now you have to practically disassemble the whole machine! Remove the whole drum just to check the thermostat or heating element? What BS. Talk about a giant step backwards.

@polyhistorphilomath Год назад

Amen

@joneseyy21 Год назад

They simply don’t make things anymore easy to work on, they actually want to make it harder. Considering repair technician fees for the time it takes and parts pricing makes the person with a broken unit contemplate just getting a new one instead which is what manufacturers want. They don’t want you to have a dryer that lasts forever and easy to fix. Just like the ancient vacuums that don’t break, the old fridges that work like the day they were new. They all caught on that they can make more money by making products that fail over time and even more money if you make them difficult to fix.

@1967wjsmith 3 года назад

Simply the best how to video I have ever come across on RU-vid. Very easy to follow steps with nothing left out. I followed to the letter and found my issue to be the heating element had packed up. $40 fix. If all videos on RU-vid were this well put together we’d have no need for tradesmen. Thank you so much!!

@bensappliancesandjunk 3 года назад

Thanks!

@jaysonhansen5647 3 месяца назад

Fully agree!! This saved me a lot of money and time trying to figure it out on my own.

@staceygordon6540 Год назад

This video just saved me $200-$300! You did such an amazing job going step by step and I was able to install a new heating element all by myself! Thank you so much for taking the time to do such a detailed, informative video! Very well done and very much appreciated!

@scottmccoy4129 2 года назад

THANK YOU!!! This video was absolutely perfect ! 👍 It happened to be my exact model, so after watching it I was able to attack the trouble shooting like a pro. Element didn’t have continuity, removed it, and sure enough it had a break in the coil. You saved me a bunch of money and hassle. Great work, keep the informative videos coming!

@joshua627 Год назад

I was still overwhelmed when I started by repairs - thanks for giving me the confidence to persevere! I had an F31 error but it wasn't voltage, it was the heating element. This video was a real gift. Thanks for taking the time to make it!

@monicaprescher3852 4 месяца назад

Thank you for posting your comment. I’m getting F31 error code yet that code I don’t see it listed on the paper.

@MsLee7878 3 года назад

Thank you for an easy to follow instructions to repair my Whirlpool Cabrio Dryer! You made things so easy, step by step. I knew I had to replace the heating element, but your video gave me so much more to check in case it was other items! Very much appreciated!

@byranwilliams2164 3 года назад

Thank you so much for helping guys like me have the confidence to attempt appliance repairs. You've been a blessing to my family and I! 🙏🙂

@bryankinsey2489 3 года назад

Thanks to this video, I was able to conquer a job I could not have done on my own. My dryer is exactly like the one in the video, and its heating element is not the simplest to replace. I had erroneously assumed the element would be accessible from the back of the dryer, so I started there and quickly realized I didn't know where to find the element. A quick Google search, and I was watching this video. Watched a little ... paused ... did the steps on my dryer ... returned to video, then repeated those steps until I was done. It was awesome to be able to definitively diagnose my bad element with a multimeter before actually installing the new one. I knew I had corrected the problem before I ever put it back together and had confidence it would produce heat when called upon to do so. I really appreciate the assistance that allowed me to do this myself and save probably hundreds of dollars. Thank you!

@AmirBendayan 2 года назад

Thanks for posting this video. It was a lifesaver yesterday. Been having issues with the dryer leaving clothes wet and the "Check Vent" light on for a long time. Thought I had cleared all of the lint until I dismantled the front of the unit like you showed and found gobs of lint everywhere. Cleared it all out and afterwards the machine dried nicely, ran more quietly, stayed cooler all while the "Check Vent" light remaining off. Much appreciated!!!

@MsLee7878 3 года назад

By the way forgot to mention when looking for the replacement element....be careful they will charge up to $200.00 for the part. I found what I needed on Amazon $30.00 came overnight! Exact one! Saved me a ton of money with this video. Thank you again.

@johntroy3802 2 года назад

Thank you for this in depth review- I was able to troubleshoot and diagnose down to a broken heating element - new parts on their way as we speak -$19.99 all in!

@michaelbattle7477 3 года назад

Your instructional video was spot on. I replace the element and one of the sensors for about $200.00. The maintenance also gave me the opportunity to clean the unit and vent hose! Thank you!

@bensappliancesandjunk 3 года назад

Nice! I am so glad it helped you!

@bikerdude325 2 года назад

Fantastic video! Helped me fix my dryer when the heating element failed. I'm not very mechanically inclined but this video is a great walk through. Thank you so much!

@josephshredl9355 Год назад

Thanks for the great video. Everything went so smooth thanks to you. Ended up being shorted wire on heating element (you can see where it shorted on the housing before it melted). I still checked all the electronics with the multimeter and they were fine. What a great instructor, keep up the good work!

@averyjankowski1469 Год назад

Thank you so much, you saved me from buying a new dryer and taught me more than I would've ever known about dryers. You're awesome!

@mrx5574 Год назад

A great video, each step truly helped. I got it apart and back together. I cleaned it out, checked the belts, and setting of drum. I hope this has stopped the loud screaming sound it made yesterday.

@user-zp1oz6ie3x 10 месяцев назад

Thanks! Absolutely the best DIY instructional video I ever watched. It helped that you were troubleshooting my exact model dryer! Very lucky to find both you and my dryer in the same video. Thanks again, it was the cut-out sensor that went bad, but it also needed loads of cleaning that can only be done effectively by breaking the unit down. Now running like a brand new dryer.

@JWoodley23 3 года назад

Awesome video! Just replaced a heating element and saved $1800 on getting a replacement set thanks to Ben.

@garypennington539 3 года назад

The most informative video I've seen. Glad I found it, I followed it exactly and was able to find the problem and repair it. Great video

@bradberke7409 3 года назад

I agree. Perfect video. Fixed my dryer quickly and for $21! Thank you.

@bighaus224 Год назад

1 year later. Still amazing video. So clear, precise, not too fast, not too slow.

@stevenbell12 2 года назад

One of the most methodical, incremental videos I've seen. Thank you!

@jpitt42 2 года назад

This video is so well done. You saved me a ton of frustration searching for the clips to unhinge the top of the unit. Thanks!

@cynthiafarrow1495 Год назад

I want to thank you so much for making this video. I took my Maytag dryer apart and was able to test and replace the heating element. I love putting things together but never taking it apart and resembling. Again, great job on this video.

@WLPorter 3 года назад

Awesome homeowner video! Was able to quickly diagnose a bad heating element. Thanks for sharing the location of the tech data sheet under the control panel. I had to dig out my Robertson bits (square head) to get the console off. This is only the 2nd time I have run across that style screw. looking for manuals that’s not one the popped up. Interestingly, I got a diagnostic code F 31 which is not supposed to be a code for my model. Whirlpool refers you back to an L2 error. Thanks for the tip using a putty knife too. In the past I would have shoved a flathead screwdriver between the pieces. The putty knife slide right in and was long enough to depress the clip all the way.

@bensappliancesandjunk 3 года назад

I'm so glad this helped you out!

@user-ji5kx3ed9l 9 месяцев назад

Thanks for the video. I almost went ahead with getting a new heating element, but went back and followed checking each part and found that it was the heating cutoff switch, spent $25 and have heat again.

@lancefulmer8153 Год назад

Thanks for the informative video. I live in a rural area where they charge me $85 just to come out. With your help I was able to find the problem and fix it for a $35 part and a few hours on my porch.

@coryhickerson1955 2 года назад

Brilliant video. Ben made drier troubleshooting very simple to understand, and I used my multimeter for the first time! 😄

@carloscortez2276 4 года назад

Great video! Great details on how to test components and their function in the dryer.👍

@bensappliancesandjunk 4 года назад

Glad it was helpful!

@christian_7500 Год назад

Great guide! I decided to test my electrical first. I I was unable to test for 240v with my analog meter, so I used a digital one and found the outlet is working appropriately. I changed out the breakers though as they didn’t have the connector to switch off both breakers at the same time (maybe I could’ve bought the connector in hindsight?) I followed the whole guide in order. The thermistor wouldn’t read at all with my digital but it did with the analog reader. Ultimately, I found the heating element was bad, but also found that the idle pulley tension arm plus the belt needed to be replaced. It all took my about half a day and $80 in parts and cleaned out all the lent. The belt is awkward to get on like the video shows. When I turned it back on there was a slight burnt smell for about 5 min, seemed to be just from cleaning. Working again! It’s weird that my washing machine completely gave out about 2 weeks ago and now this.. I decided to get a new speed queen Tc5000 - not disappointed

@johnr.timmers2297 Месяц назад

Just pulled the old dryer apart, came back to the computer to continue research before cleaning it up and replacing the heating element. THANK YOU. Gonna grab a multimeter and make sure I know what's wrong

@taurinoroman3052 2 года назад

Thanks for you help with the video I did exactly you show and only spend 20 dollars for fix my dryer The problem was the thermal fuse God bless you today and forever🙏

@blueprince2008 3 года назад

Thank you so much for taking the time and educating us DIYs

@jamesbrown-no6ej Год назад

I never comment, but I need to this time. THANK YOU. Started fixing the dryer on my own and got stuck, was able to skip around to the part I needed. Dryer is up and running again. Thanks!

@lx2077bob26 2 года назад

WOW!!! Extremely informative a true rare breed professional, My dryer all fixed in under an hour had to wait for FUSE of course which I ordered on Amazon for 6 bucks.THANK YOU so much!!!

@tomy5284 Год назад

The most informative video I've seen. I fixed my dryer and it cost about $80 for the heating element ! very helpfull ! Thanks!

@mikezimmerman5756 3 года назад

Thanks for the help I believe I fixed my problem which was a lot of lint on the inside that was even getting in the heating coil

@cormachondros 3 года назад

Thank you! This was super helpful, and I just ordered the parts I needed!

@bensappliancesandjunk 3 года назад

Great!

@septmrn 3 года назад

Thank you for the great video. It was perfect for my situation and helped me feel confident that I could and did replace my heating element in my Kenmore dryer. Kudos!!!

@vansmith8012 3 года назад

Thanks a lot for this video this is the exact unit I have and my heating element went out. Your step by step instructions made it possible for me to order the part and save $400 on the installation and $60 on the part. Thanks again I look forward to viewing more of your videos.

@naitbliss 3 года назад

This video just saved me a couple hundred! Thanks so much for taking the time to put it together.

@KHDailyKnives 2 года назад

Thank you for the video! I was having a hard time figuring out how to get the top open with the clips. Thanks for all the time and effort you put into it.

@rickcrouch1627 2 года назад

High quality video and step by step instructions. Exactly what i needed! Thank you.

@tracys.6033 3 года назад

Ben, thanks for great video tutorial. I fixed my dryer!

@rogerbec5766 2 месяца назад

After entering my Whirlpool model number in APPros website, they show a stackable dryer and not the Cabrio model. Your video depicts the exact model (Cabrio) I have so I'm glad I found you. Wish I had the OEM part numbers out though. Great video Ben.

@jennygriffin5358 3 года назад

Great info! I was able to swap the heating element no problem at all. Thank you for making this!

@bensappliancesandjunk 3 года назад

Glad it helped!

@robertmontgomery5959 3 года назад

outstanding video. you're a great teacher! thank you for this video!!!

@JrandApril03 3 года назад

Thank you for this video. It guided me to be able to fix my dryer, and I was able to tell my wife “Not today new dryer.”

@bensappliancesandjunk 3 года назад

Sweet! Glad you could keep it running a little longer!

@davidanderson9783 2 года назад

This was the perfect video, had to clean out all the built up lint and replace the element. Thanks!!

@Mammalamma 3 года назад

Thank you so much! I fixed my dryer with your help!!

@wowchad Год назад

Although mine is gas dryer, this was an extremely helpful video - THANK YOU 🙏🏼 Unbelievable how packed full of lint these things get! I’m sure my high temp sensor is bad because there’s evidence of a smoldering fire in mine yet it’s working with intermittent heat issue. (& a good thing it required attention before we had a full-blown fire!) If cleaning alone doesn’t solve my problem I’m guessing it’s going to be the usual culprit, a bad gas igniter. I just can’t comprehend the fact I have to take that bulkhead apart to get to such a high maintenance component!

@bensappliancesandjunk Год назад

Sadly, many brands have gone to a more "Elegant" 1pc front that does away with any hope of a service access panel. Which is a shame because it'd be SO helpful on a unit like this.

@geokite Год назад

Excellent video! I was able to check all the stuff under the drum without taking the drum out. The drum can be propped up/in with a length of wood, and all the connections can easily be reached. I checked everything in your video, and after all that, it turned out one of the two breakers feeding the 220V had tripped...the one that the machine needs to heat the air...

@chanelone6463 Год назад

Dude knows his shiat! Thanks. Saved me $600.00. I didnt have to replace whole dryer but just the thermostat! Your a damn genius!

@user-bc4ry7rk7g 7 месяцев назад

Thank you so much for this video! Absolutely priceless, and you made it so easy to follow along. Our heating element grounded out, but without this video, I would have thrown the whole thing away over a $30 fix!

@sukafreecity 3 года назад

detailed and informative video 👍..Great job sir !..Your truly a professional!

@DJArrigo 6 месяцев назад

I recycled the double breaker and it worked! No tools needed.. Amazing!!!!!!!

@hawker800mech 3 года назад

Great video! Very helpful in troubleshooting my dryer. Thanks!!

@bensappliancesandjunk 3 года назад

Glad it helped!

@toddheagy9409 3 года назад

Very good helped me diagnosis and fix my dryer. great work

@kathyj183 Год назад

Awesome video !! Just saved me hundreds on a repair call! Bad design on Cabrio dryer with regards to lint build up within the unit - must clean out regularly

@thomasmarshall2337 4 года назад

Wow Ben. Extremely informative. I don't even own this dryer or any like it, but I enjoyed the video!

@bensappliancesandjunk 4 года назад

Glad you enjoyed it!

@raymondj3869 Год назад

Thanks. Found that the thermistor is bad. Glad I took it apart. I bought it in 2008 and the fan was packed with hardened lint. Should work much better now.

@voodooe99le Год назад

thank you for the video, when i opened my dryer up, found that the smaller belt fell off and also the nut came loose. but i can see that my main belt would need to be replaced soon so this video helped just to know how to open it up and get to it. thanks again

@mainboard1987 9 месяцев назад

Thank you for the video! The thermal cutoff was my issue. Bought the element and all parts from Amazon and it had everything I needed and more.

@BrianWransky-uy8rw Год назад

Thank you for this very informative video. Helped me change out the heating element and now everything is running smooth!!

@stevenromero2313 2 года назад

Great Video Tutorial!. I’ve tried every test in made in the video although it appears that my heating element is crossed but, I’m not sure if this has something to do with this: when I start my dryer y start kind of stuttering and then shuts off, and one time it did run full cycle.

@agibsons Год назад

Thank you for this video! You do an excellent walk through. Saved me a bunch of money and added benefit I feel so much more confident! Yay!

@paulp6105 2 года назад

THANK YOU !!! Great video. You saved our money. Very much appreciated !!! I made one mistake putting back drum belt. It was upside down and drum was not spinning. Overall great video !

@yvsnkk Год назад

Thanks, it worked.. i was replacing the dryer belt Every step was helpful For removing the sensor plugs.. we had to use screw driver..

@ChasingGlory-jr5ux 8 месяцев назад

Great video! I stepped through the troubleshooting and found my heater element to be bad. It was an inexpensive repair.

@bensappliancesandjunk 8 месяцев назад

Nice!

@user-vs5qn9sl9c Год назад

Hey Ben, Thanks for the play by play, absolutely awesome. Since I have the whole dryer open to change the fuse should I just do a complete overhaul meaning changing all sensors and belts, or just leave well enough alone and deal with the bad sensor only?

@morboone 2 года назад

Thanks! The video helped me disassemble my dryer to troubleshoot a persistent “Check Vent” light.

@bensappliancesandjunk 2 года назад

Glad it helped!!

@rsanmiguel1123 3 года назад

What do I check next since I have replaced heating element and all of the kit

@fgwatson7813 3 года назад

Thanks for video Ben. Now I'm ready dig in to my dryer. you mentioned parts from LFOBB. I cannot find reference and/or link to LFOBB. What is it?

@vskuzmenko 5 месяцев назад

Thank you for the step by step guide. Helped me to fix my Kenmore dryer!

@kimsiano2281 Год назад

I have a cabrio dryer WED5800BW0 and have the second version of clamshell for the heating element. This thing was near impossible to get back into the hole because of the tag at the top. I had to bend it back slightly to get it to reinstall.

@shelbywashington7064 2 года назад

Very helpful for my dryer brand and model... thanks

@rickstano1231 Год назад

Perfect video guide! Repaired my dryer with for$13!

@tag78002 3 года назад

Thanks so much, saved me a ton on a service call!

@bensappliancesandjunk 3 года назад

Glad it helped!

@andrewvelasquez79 2 года назад

Probably the best appliance diy video I've seen

@robinriggs8367 Год назад

Thanks you are the man. I just replaced the heat element on this same machine. Thank you, Thank you, Thank you Also the lint that collected in this machine is ridiculous and I'm sure that's what kills this dryer more often than not.

@brianfletcher7942 4 года назад

Good information on this dryer.

@bensappliancesandjunk 4 года назад

Glad it was helpful!

@prophecyfreak4719 2 года назад

Thx so much! I have to repeatedly clean out my blower lint due to no air flow and decided to try myself instead of a $100 service call:)

@bensappliancesandjunk 2 года назад

St. Anger was the first album I got excited for because I learned a ton of guitar solos and pieces from their earlier albums, and that was the first one they made when I learned guitar so... really tough because I am not a fan. But Death Magnetic? Totally redeemed them. Better than anything they did since Black for me.

@KevinSmith-hj6fm 3 года назад

Very informative video. Many thanks to you.

@bensappliancesandjunk 3 года назад

I hope it helps you!

@shannonbalvanz430 Год назад

Ben Thank you. I was able to replace the heating element thanks to your video.

@barcelona2020ful 2 года назад

That was very helpful. Thank you for the good information

@EvilJ626 2 года назад

This video is fantastic. Thanks Ben

@brianrobbennolt8663 2 года назад

Thanks for a GREAT video. VERY helpful. Thanks

@Jrokk.1987 2 года назад

I'm getting no power at all. Will any particular fuse control that or which fuse should I focus on

@MiguelG209 Год назад

Any idea what the issue could be when the sensing light comes on?

@israelborochof7803 2 года назад

question....the dryer is very powerful,yet the clothes are a bit damp even after 60 min. I have tried all the settings, cleaned the ducks and still ..... can you tell me something that i can do now ??? Thank you. super excellent info.

@concretemuzicent Год назад

thanks for your help. I was able to repair my dryer

@keithingram6181 8 месяцев назад

Wow Ben did you save me alot of time!! Thank you for posting these videos to help do it yourselfers get the job done. So thankful

@dustinsmith9125 2 года назад

Great video! But when I finally got into my Whirlpool Cabrio to change the thermal fuse .. that is nicely placed behind the lint box.. not real easy access. Anyway.. the clips on the thermal fuse don’t just pop off! Ugg! They are plastic and look like they clamp around the metal fuse pieces.. I can not get them to come off! How do I get them off!? I would really appreciate some help. Thank you!!

@brandiharper1441 2 года назад

Thank you so much for your video. It helped me tear apart and reassemble the dryer. Just have one question I had to sit on the top of my dryer to get behind it. And now it makes a rubbing noise when I have the top completely shut. Any suggestions on how to fix it?

@bensappliancesandjunk 2 года назад

I'd check the casing and make sure you didn't maybe push in a little metal causing the rubbing noise. Also make sure the roller shafts are clean and free of derbis. Sometimes you can get small bits of dirt and derbis moved around when working on a unit causing issues