Whitestone Dome Glass for Galaxy S22 Ultra / S22 Plus / S22 Installation Manual 

Installed on my S22 Ultra and on my son's S22, as well as my fiancée's S21 Ultra and my daughter's S21. These are the best tempered glass screen protector on the market. Had one on my son's S10 Plus that he told me he didn't really need it but same day it was installed, it fell out of his hand and landed face down on the concrete. Shattered the Whitestone Dome but his screen was perfect. 3 years later, when time to trade it in for the S22, his screen was flawless when I peeled it off.

Followed the instructions and it worked fantastic! I had a few minor scratches on my screen and this filled them in and made the screen look perfect!

I’ve installed 7 screen protectors (different brands) on 7 different phones in the last 2 weeks. The curved screens on the Galaxy were just okay (wife had trouble with touch sensitivity) so I found WhiteStone Dome glass. This is a premium quality product. It’s not simple, but absolutely works incredible. It’s so clear it’s invisible and touch sensitivity is excellent. I highly recommend WhiteStone Dome, excellent fit and finish.

I have installed on a s22 & S22 ultra with no issues. Thanks for the step by step.

First off - not a super user-friendly video or package. Anything that relies on something being precisely level is already a problem. Audio would have been helpful. Having said that - it does what I need it to. Fingerprint scanner works perfectly. It protects my screen. There are some small bubbles but it's no worse than a cheaper one - only reason I got this expensive one is to use the scanner, so overall it seems decent. So far, at least. Maybe not worth what I paid but at least it gives me some peace of mind.

Excellent product, relatively easy to use and apply. This is the best product in its category and quality. We got a pair for new S22 ultra and fits incredibly good!

Is it possible to buy the glass dome premium screenprotector without the UV kit for a cheaper price?

This product is not meant to be used by unskilled individuals. First try I could not grasp what the video was saying and what I was seeing. Wasted the adhesive. While trying to clean up the adhesive off the protector it broke. I watched the video two times. I advise you watch the video at least six times and doing a 'dry' run without the adhesive. I caulked it up to my mistake. On the Second attempt the jig was not level and all the adhesive rolled off the screen before I had a chance to notice it and get the new protector on. Part of my problem was that when I went to remove the Back 2 from the second protector the Top side pull came off but NOT the top side protective cover. By the time it was off all that adhesive had flowed off the phone face. Continuing with the second try I used the third bottle of adhesive and everything seemed to go like in the video but guess what? After waiting the 100 seconds the very top of the screen I could tell had NO adhesive under it. After trying to move it around I just finally gave up. Used a paper towel, alcohol wipe, and the microfiber cloth and cleaned off my screen and through everything away. I do NOT recommend this unless you have a lot of money to buy extra supplies or are just good at it. I will either buy something else, hire a professional to put it on, or not deal with an extra layer of protection and rely on the phone insurance. My phone is an S22+. Wish I'd seen some of the comments before attempting. Did this from the vendor's website which doesn't have any. I got fooled going to Amazon and seeing the, likely fake, number of reviews and the product being highly rated.

Instructions should add: 1.) SURFACE MUST BE FLAT.Use a level if you have to. 2.) after first series of 15 second cures, hold strongly over finger print sensor at least 10 times.

Want to throw the whole contraption in the trash. Instructions are not sufficient. I watched three videos first and then stopped video as I installed. Went through both screens. First try: the glue never covered the screen, but made a huge mess on the screen. The second try: I used two containers of glue and was able to get enough for the bottom edges, holding the frame to help.. However because I'm dumb, I put the glass on backwards! Good luck installing this!

I just got this for my S22 Ultra. Box arrived, unopened. Some pieces are missting. The clear liquid guide piece and the lego looking thing that goes under the black retaining tab thing is missing. Guess I am out $50 because apparently you can't install this without that long, transparent guide piece.

Thank you for this video.

I got this installed properly and it looked really well as if there was no screen protector at all. The fingerprint scanner works well too. However, after a couple of days the left and right sides started to *lift up* and dust and lint started to get in. *It's absolutely annoying.* I keep pressing it with the microfibre cloth to see if it'll stick back, but it doesn't. Any advice?

The fingerprint reader barely works with it. What happened to whitestone

Get a level surface mine lost alot of adhesive leaking out on side and it isnt wellicht done i lease it for ow and maybe the second time will be beter

I watched the video about 3-4 times before attempting. I set everything up for the most part to do it, and followed the video along while doing it, pausing when needed to read instructions. Only thing I did which might be good or bad, is I put my finger over the fingerprint sensor and pressed down with a good enough force after curing the top once, and then I cured the bottom while holding down for a few seconds. Then I took my finger away to let it do its thing. followed the rest of the curing process as said, and did a bunch more cures after to hopefully have it really on there. Finger print settings include my old ones along with two new ones (each thumb). Looks flawless and works absolutely flawless. No issues besides the nerves of the bubble moving and overspill. The case I use is a Spigen liquid crystal TPU, and it fits perfectly with about 1mm all the way around the glass for wiggle room.

Tried it twice, first time I didn't pull the pin fast enough and the adhesive went too far. The second time I snapped the dome glass in half when removing the liner. I guess no screen protector for me

I did everything correctly, but my phone fingerprint scanner 70% of the time didn't work...I even redid my fingerprints after the screen protector was applied and even then always had issues. I had to remove it

I hate this whole thing so much. Ridiculous install process. Big waste of money even when you succeed in installing this. it cracks so easily and once it starts the whole thing becomes garbage. I rather continue with the cheaper screen protectors and buy 10 of them for the price of 2 you get from this.

Installed it perfectly but fingerprint works 1/5 times. Very poor sensitivity for fingerprint reader even with touch sensitivity turned up. I reset fingerprint after installation, even tried registering the same finger more than once, still have to push VERY hard and only works sometimes. I remember it working so much better with the S10+ fingerprint. What happened? Very disappointed with it this time, going to process a return with Amazon.

Does uv machine comes with it?

Fingerprint reader is significantly slower by like half a second but it always reads it on the first attempt. Screens looks great aside from that. Will update if the screen gets worse or if the fingerprint sensor improves

Because of the adhesive, does the protector come off easily? If you need to correct it or if you want to sell the phone after a coulple of years.

Como faço para compra pro s22 plus?? Sou do Brasil

Just installed went beyond terribly.. ended up with bubbles under the protector after 3 attempts.. I ran "dry" trial runs before hand still poor luck at best might try agian.

Damn, got a small bubble after my installation. No way to fix?

Junk

You just have enough for 1 use in the box, while giving 3 glasses. Ridiculous

After some years with the protector, will it be fine to remove it after all that time? Maybe using some tape to not let it crack everywhere?

Complicated trash that leaves gross gooey glue on your phone if you mess up, and you will. This is the worst money I've spent in a long time. I got duped. just send it back. Don't even try applying it. The Adhesive won't go to the edges. The UV won't glue it up. This video "instruction" moves at light speed and is near impossible to follow. Other instructions also suck. This product makes me want to be violent.

Trash product on my second day with this screen protector and is already broke with and the phone screen is too want my money back

Finger print scanner works 1 out of 10 tries and the phones screen does not get fully protected. Also if you want to truly fk it up once installed go ahead and put a supcase beetle pro on it so you can lift the corner fairly easily on this over priced product. Trash.

Why is there advertising on this video?

Why is there no sound????

This product will void the Samsung warranty and it ruined my phone. Whitestone does not stand behind their products and their customer support is virtually nonexistent.

RUN, don't walk away from this dog trash!!! 😨