Why I sold my DJI goggles 2s 🤭

Подписаться 509 тыс.

Просмотров 126 тыс.

50% 1

The Chanclas just do it better.
Questions Check here V
New HD Dead Cat Frame - bit.ly/3Bog4Tr
NEW V4 Motor - bit.ly/3HRMNDd
New Radio - bit.ly/3AOQ3fh
NEW MR STEELE DISCORD SERVER / discord
Ready To Fly Mr Steele Drone - bit.ly/2RMwbET
ETHiX is my Company & we aim to refine FPV.
Please check us out - ethixltd.com
_ ETHIX APPAREL _
- Triple E Hat - bit.ly/34I7FhS
- Black Ethix - bit.ly/3fE0RCq
- T Shirt - bit.ly/3duvgkO
- Hoody - bit.ly/2yBtAr7
- Beanie - bit.ly/3fEPydn
- Stickers - bit.ly/2WJmFEh - (Vinyl) bit.ly/3GVOlL0
MY personal Amazon Shop.
www.amazon.com/shop/mrsteelefpv
Please Follow me on other platforms
TIkTokP: / mrsteelefpv
Instagram: / mrsteelefpv
Facebook: / mrsteelefpv
* / mrsteelefpv
My PODCAST (CHECK IT OUT)
teamfailsafe.libsyn.com
_MUSIC _
_ ANALOG DRONE_
- Drone Frame - bit.ly/2SWdNKd
- 6S motors - bit.ly/3HRMNDd
- Flight controller - bit.ly/3GM1xCc
- ESC - bit.ly/3qXUwr5
- Props - bit.ly/37gmGpI
- FPV Cam (camera tilt 25°) - bit.ly/3czLZTC
- Video transmitting antenna - bit.ly/2YURw3w
- Video Transmitter (800mW) - bit.ly/2MH5KPZ
- Lightweight 6S Battery - bit.ly/36hke4e
- Ethix Battery Straps - bit.ly/3fEC419 & bit.ly/2yOR241
- Lightweight HD cam - amzn.to/3uThMv2
- New HD Cam - amzn.to/3LFepxu
- Action 2 Lens protector MUST HAVE! - amzn.to/3s0LDzX
- GoPro Lens protector MUST HAVE! - amzn.to/3LA0Lf7
- Ethic GoPro Strap - bit.ly/2AdIsfy
- NEW* ALL UP WEIGHT - 613g -
_ ETHIX Packing Gear _
- NEW Back Pack - bit.ly/329rVDr
- Radio Bag - bit.ly/2WlMgnw
- Heated Battery Bag - bit.ly/3bl6YbG
- Tool Kit - bit.ly/2YUTcJZ
- PROP Bag - bit.ly/2Wm7Qbv
_ Radio Gear _
- Ethix V2 Neck Strap - bit.ly/34YWIbF
- Radio - Ethix Mambo - New Radio - bit.ly/3Jspa4w
- Radio Transmitter (long range) - bit.ly/2PglGqw
- Radio Receiver - bit.ly/2OE6NNK
_ Goggles _
Ethix Goggle Strap - bit.ly/352eVVq
- NEW FPV Goggles - bit.ly/2TI3UkN
- Goggle Pouch - bit.ly/34Ih5tK
- FPV Goggle Receiver - bit.ly/2PP5WzH
(Antennas)
- **NEW FPV Receiving antenna (omni) - bit.ly/30mTSrl
- **FPV Receiving antenna (directional) - bit.ly/3bsS1rl
- Ear Bud (for Quad Audio) - bit.ly/36aQsOp
_ Battery Charging Setup _
- Charger- amzn.to/2nKx0Pe
- Power Supply - amzn.to/3oMDltl
- Parallel Charging Board - bit.ly/2MiCDTw
- Battery Checker - bit.ly/2yNyBg3
_ Home Camera SETUP_
- Sony A7siii - amzn.to/3gQvMgW
- Macro - amzn.to/2Ds9v4D
- Wide angle - amzn.to/2HZzQfV
- fluffy critter - amzn.to/2mCL9xo
_ Tools/parts _
- ETHIX Prop Tool - bit.ly/3gQ72oY
- Tool Kit - bit.ly/2YUTcJZ
- ETHIX builders cable set - bit.ly/2WKCSsT
- Field Soldering Iron (literally, best thing I have ever purchased)
bit.ly/2PhoOma
- *Soldering Iron Cable (need) - bit.ly/2MtqB8T
- Quality solder - amzn.to/2uJ89z3
- Quality Electrical Tape - amzn.to/2mzWkqp
- Quality Heat Shrink -amzn.to/2uH96rP
#FPVFreestyle #Ethix #MrSteeleV4

Развлечения

Опубликовано:

21 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 618

@CarbonGlassMan Год назад

I'm still quite happy with vistas and the v2 goggles. This hobby is expensive enough as it is.

@mdk42o74 Год назад

i say get as much life out of your stuff as you can

@KOrnhOliO1 Год назад

Agreed! They simply work so0oo damn go0d! And are as bullet proof as FPV products have ever been. knock on wood - I've never had a single issue with any of my something like 7 Vistas!

@KOrnhOliO1 Год назад

@@mdk42o74 It works soooo good and no one ever said we had to have the latest gear to still enjoy the hell out of FPV!

@CarbonGlassMan Год назад

@@KOrnhOliO1 Yeah, I think I have 5 vista units. The only problem I've ever had was a broken mipi cable from a crash on the 1st build using the DJI system, but the cable was stretched pretty tight and the build was not very solid. Replaced it with a longer cable and I've never had a problem with any of the DJI products. I think I'd rather have 120fps 720p over 100fps 1080p too.

@xothermik Год назад

Tell me about it. try doing it from nigeria like me where the currency value is shit to a dollar lol

@jejefpv Год назад

Hi Steele, Goggles 2 feel like 24 fps/low quality on low power mode and the bitrate you noticed is not liying 🙂 No need to fly, I did the same test on the bench with no props. Difference between low and full power mode is night and day in the Goggles (you can also disable Low power mode in the menu if you prefer). It can be seen in the DVR too. I'll post a DVR sample just under this comment, hoping RU-vid will let it be 😅

@jejefpv Год назад

Here is the DVR showing the difference between Low and Full Power : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PuGnnXil42o.html (I can confirm my eyes see the same thing in the Goggles, even better actually, YT being limited at 50-60 fps)

@DNLKRNWN Год назад

I hope many ppl watch your vid and will understand. Thanks for sharing

@jejefpv Год назад

@@DNLKRNWN You're welcome 👍

@asvision83 Год назад

Je me suis presque demandé si il nous faisait un prank 😂

@jejefpv Год назад

@@asvision83 J'avoue 😅

@rgilroy1909 Год назад

So glad that I kept my V2's. They may be more of a "Face Box" but they're way more compatible and adaptable to multiple applications

@alessiomontana 8 месяцев назад

Fake, study

@0TheRain0 Год назад

My goggles 2 actually broke after not much use, and I was super careful with them. In contrast Ive been throwing my v1's and v2's into my bag with the rest of my stuff for years without issue. Got my goggles 2 back from repair yesterday and thought about selling them, but decided to keep them because I have a set of v2's already and I enjoy the weight/size difference on my face. That said, I have been weighing all of the same plusses and minuses, aside from the frame rate issue you are pointing out. As others have said, I think your test my not be valid in that case because of low power mode. I've noticed no latency/frame rate difference personally.

@t0tobi Год назад

7:52 - do not test this stuff in low power mode, Air Units will limit them selfs when not armed. Also, to get fastest performance on the O3s with the goggles 2 you will need to set the videomode to 100FPS on the O3. O3 and G2 Combo will work best then you set the video mode to 4:3 2,7k 100fps. It has also the best FOV.

@DoctorrMetal Год назад

but 4:3 DJI should have used 4:3 screens in the goggles 2

@freezillion Год назад

indeed 4/3 2.7k 100fps and not in low power mode ...

@tomaszboril Год назад

at least someone got them for the discounted $$ ;)

@KwadLife Год назад

Also set shutter as high as possible

@redcobra1246 Год назад

Interesting. I'm going to guess 16:9 works the same minus the fov part?

@mikebergman1817 Год назад

I found a decent solution to the goggles 2 foam fitment that gave me a zero light leak fit, and doesn't play tummysticks with the bridge of my nose. It did involve cutting the stock foam away from the face plate for about 2" outside and under each eye, then slipping some thin foam in and gluing it in. But it came out pretty clean. I understand your reasons. The form factor was the #1 jumping off point for me. I am really hoping they do ok without a fan when summer comes. Not putting a fan in was kind of a numb nuts move imo.

@atticninja9194 Год назад

Only issue I have ever had with big ones is them letting light in a bit. Aftermarket foam and they’re gold.

@schtinerbock4570 Год назад

Wow! Thanks for showing the difference Mr Steele. Was trying to decide between these today.

@rotorlife Год назад

Nice findings! Thanks for sharing.

@lloydranola Год назад

Thanks for this. I''m still using V1 goggles... for work. Good to know nowadays I don't always need the latest version of everything.

@LuckyMoniker Год назад

thanks for the conclusions, i own v2 and have just been waiting a bit to get into 03, and now i know i dont need to bother with the new goggles

@BMSWEB Год назад

thanks for the video buddy! Very Interesting findings. Appreciate you sharing this

@randallbadgett4040 Год назад

I've yet to fly digital but I did buy a new set of V2's a back in the fall. I haven't even opened the box yet. Glad to see some positive things still going for it and I can't wait to try them. Thanks!

@Fly_High_FPV Год назад

What are you waiting for, dive in sir 🙌 holla if you need some help

@randallbadgett4040 Год назад

@@Fly_High_FPV Thanks man. I plan on jumping on board this spring. I'm just trying to keep the priorities first but I'll get there.

@WarriorLife_fpv Год назад

Make sure to do the wtfos butter hack on your V2s. The set I got last September were on the firmware that couldn’t be rolled back with Margerine. 3.00.16 or whatever but Butter fixes all that.

@KimboFPV Год назад

Love my DJI V2 Goggles for Freestyle.....had to buy HDZ for racing...........Thx Steele, have fun flying ! Onwards and Upwards

@svenniefpv Год назад

I'm glad that my V2 still work well with the 03 units. Perfect combo For me also

@cgwclimber Год назад

After 7 years, I finally went from analog to digital; I got the goggles 2 - never tried the v2 - didn’t believe it was worth it, and the v1/v2 was so bulky like most dji. I can’t afford both...and I still wish the Goggles 2 could be as small as the fatsharks, but at least its much closer to that size than the v2. Regardless, digital is awesome! Happy to experience the change. I had no issue with the update.

@EmDee316 Год назад

Thank you for sharing. I was seriously considering the goggles 2 and selling my v2’s but you just saved me a ton of money on goggles. 😂

@mrray52381 Год назад

Thanks Steele!! Always like to hear your take!

@romeo.ardael Год назад

V2 still does its job pretty well. Thanks for the comparison!

@20robob Год назад

Thank you Mr.Steele I learned some things from this well made video!✌️

@realandthebandit2535 Год назад

Thanks Mr! Great info.

@bluesteeltraining Год назад

I was beginning to think I was the only one that hated the new goggles! For me, the biggest gripe, well, the two biggest grapes were the touchpad! It was a total pain in the ass and I was always accidentally touching it and changing something when I didn’t mean to. and the big one was field of view. There was too much that I couldn’t see, battery, read, outs, and things like that. Whereas with the older goggles, I can’t even remember the different names because they’re so similar, I can see much more of the information on the screen, and as you mentioned, I can wear my glasses.

@benfrink376 Год назад

You can lock the TouchPad so you don't accidentally touch it.

@DavidOwensuk Год назад

Enjoyed the info... Great video - thanks for sharing.

@leahcim501 Год назад

This is what I wanted to know from you! Thank you for this video.

@NorthwestDroneService Год назад

Thanks Mr. Steele I was considering a purchase but will stick with my old V2s.

@marklitvin9291 Год назад

Thank you sir for the honest comparison 😁

@nathan3431 Год назад

Great job on the video!

@HartBeat2 Год назад

i appreciate your insight on this so much! here i was, thinking i was missing out on the G2.

@KOrnhOliO1 Год назад

I think he needs to ARM both quads and not be in low power mode. Many others here in these comments are saying just that.

@derelictfpv Год назад

I doubled down on the V2 goggles and grabbed a spare set. Glad I did. Also got a whack of Vistas super cheap on black friday.💪

@benmast3r865 Год назад

No you aren't the only one in the world! Very noticeable difference. I can also confirm the very comfortable fit of the old Goggles. Very helpful review!

@attackfpv Год назад

Killer video. Appreciate it and I'm glad I kept my v2 goggles

@DNLKRNWN Год назад

Oh dear.. with goggles 2 you need to arm the o3 quad first to exit the low mode and the frame rate will set to 50mbps or 25mbps instead of 7mbps before you arm the quad.. I noticed this when i got my goggles2 with o3. Cheers

@BlobFish080 Год назад

Same as V2. Theyre both on low power mode.

@jayaaarh5963 Год назад

he is comparing the refresh rate of the two goggles, not the frame rate. refresh rate is fixed and will not change regardless of the power mode. 🍻

@DronePsyche Год назад

Incorrect and he’s comparing both in low power mode. Refresh rate has nothing to do with power mode.

@DNLKRNWN Год назад

@@DronePsyche if you got goggles 2 then you will understand what i said. Goggles2 images is 7mbps only before armed. And this is not happen with v2.

@DronePsyche Год назад

@@DNLKRNWN he clearly says that people will say this but that even when armed it’s exactly as he’s demonstrating

@garretpickens5745 Год назад

All I mainly fly is dji and I love there stuff but I do agree with Steele that you can still feel the difference of latency while flying to.

@fatihbirkan8527 Год назад

I just bought v1's because with wtfos you can get live audio with the original air units with Steele earbud 🙂. Perfect combination for me.

@Cinebon Год назад

Are you planning on selling that little 03 camera mount for your apex? Or selling the files? Really looking for a good solution for my 03 camera and that one looks great

@AL3XFPV Год назад

the padding you use on your "old" V2`s looks soo comfortable!

@SeeFPv-qm6ie Год назад

I agree too I'm using the v2 too

@KwadLife Год назад

What shutter speed do you use on the o3? This has direct impact on the fpv feed

@SetUP1 Год назад

Good truthful comparison, especially about the twitchy picture

@IggyBiggy Год назад

Wow, that is super noticeable. I still enjoy my v1 goggles. I wish they worked with the o3 unit, but meh. I got the HDZero goggles as well, and I am really in love with them. Great video, thanks.

@Swole_Gecko Год назад

I noticed on his goggles 2 it was in low power state meaning it was in 30 Hz mode until you arm the quad. I'm surprised he looked over this? He needs to redo the test.

@IggyBiggy Год назад

@@Swole_Gecko both pairs are in low power state and he specifically says he notices it in flight. I have dji , hdzero and analog. I believe he can feel the difference because I can.

@Swole_Gecko Год назад

@@IggyBiggy my gogglesv2 do the same thing his goggles 2 do in the video. He has auto temp control turned on but not on the v2 or it would say in the bottom right. Also yes I agree trying them both first hand the v2 goggles are smoother than the new goggles 2 but what I'm saying is it's not as big of a difference as the video shows when both are at max Hz

@dav77h Год назад

Lol it's super noticeable that he doesn't even know what he is talking about, he didn't even read the manual :)

@Gosuminer Год назад

I didn't jump on the DJI Goggles 2 hypetrain because I'm a cheapstake but it makes me happy that I get the smoothest picture possible atm on DJI.

@fpv_austronaut Год назад

I do really have problems with Goggles 2 to get the whole image sharp and in focus. I have ordered RHO lenses because they where a breeze on V1 goggles. For Goggles 2 they do not make any difference. I am also thinking about switching back to V2 goggles ...

@scottallen6478 Год назад

Good decision dude, love my v2s & 03 unit all I run in my quads. Googles2 not only uncomfortable but they get hot & fog up on hot days my v2s never have.

@redbaronfpv8555 Год назад

Give use the info on how you mounted the camera. It looks really good. And it looks like it clears the standoffs in view???

@estudioaguilamagnetica3174 Год назад

Hello! very good your tutorial! My question is, using the v2 glasses, is the difference in what is seen in the glasses very noticeable? between old air unit (with dji camera) and o3. Considering old air unit in high quality mode and 50mbps. Regards !

@maximumdrone5334 Год назад

I did exactly like you with the Old V2 Goggles Nose piece haha I needed to cut it for it to fit properly with the new foam. Big noses unite! :P

@FlyZoneFpv Год назад

Awesome bro. Thanks for this info . You just saved me $$$ 👊🏻🤘🏻

@AirKhanFPV Год назад

you have to turn off the low power mode in the comparison, the googles 2 shows the air unit is in low power mode in this mode you only get 30fps or something 😅

@stevenguarino8792 Год назад

Arm the quad in crash flip and you’ll get out of it, or turn off auto temp control

@MrSteeleFPV Год назад

They are both o3 though …. Explain that

@MrSteeleFPV Год назад

There’s a difference. It’s very noticeable. I have no reason to tell you these things other than it’s what I’ve found.. the $2.00 I’ll make from this video is for sure paying my mortgage

@xORLOCKx Год назад

The results will be the same my guy

@AirKhanFPV Год назад

There is nothing to explain, i know the new googles 2 has a little bit more latency, dji himself says you get a lower latency on the v2 googles, 😅 but in the comparison is one unit in low power mode, but the other one isnt its maybe not quite the right way to show the difference 😅

@CARandDRONE Год назад

Thank you for saving me from the upgrade! I loved the idea of flying without my glasses but duh! LOS! So true 👍

@willpowerfpv3246 Год назад

A steel to be clear, the LCD screens have 144 Hertz refresh rate, but you're only getting 120 FPS from the video transmitter. Other than that hundred percent agree. Also I have a very similar shaped face to you and I don't even think I want to take the chance on trying to put goggles2 in the running.

@MattShonan Год назад

Thank you !!! 🙏🙏🙏

@AerialWaviator Год назад

Thanks for the tip (10:00) about using USB-Lightning adaptor to get video out of Goggles with DJI Fly App. This can be handy, to capture display with OSD too, as can just activate screen recording on the phone before launching on a flight. (eg: for displaying GPS data just in case) What version of firmware you running on your Goggles? This seems like it might have been silently enabled in a firmware update.

@lilman227 7 месяцев назад

Just a heads up... it works with a basic usb c to lightning cable as well

@MSR. Год назад

I’m definitely still rocking my v1 goggles, got a set of v2 goggles and an 03 air unit in a random Iflight frame I rarely fly. Patiently waiting for a proper impulse rc frame for my 03 air unit 👌 Thanks 🙏 for the information 👊

@pierce0690 Год назад

good explain dood! i feel yah i love my v2's. lil bro got the avata... lol i think the goggles have cool fetures but lost the 144. :(

@wyomingoutdoors Год назад

Antennas for v2 ?? I have two sets of the dji v1s. I'm looking at grabbing a pair of v2s since theyre on sale. Which antennas are you using Steele? I have luminer and iflight patch on one set.

@Joeyzoom Год назад

I wish the v2 goggles had the form factor of the goggles 2. That was my biggest gripe switching from analog to DJI: big chungus goggles.

@JThemelis Год назад

Hold on - at 10:13 - this is for O3 unit or regardless of vtx, the v2 will output to an ipad via Dji fly app??

@BreakWindDrone Год назад

I bought the V2's as my big head can use all the room it can get. Being cheaper/better was a bonus.

@CloneTechDrones-619 Год назад

I purchased my V2 Googles back in November 2021, pushed the needed software with Windows 7, along with the 1200mw hack. Googles worked perfect for 2 months, then the image would freeze up during mid flight, causing me to use GPS rescue on my long range quads that I built. I sent my V2 Googles to DJI repair center and they ended up replacing the Core Board Module for free since this was a known issue for some Googles. If they would have not honored any warranty, the Core Board Module would cost $160 and repair service fee $65. They did remove my skin decal sticker and I had to update the software and 1200mw hack again, V2 Googles have worked great since then.

@joachimlarsen2k Год назад

Love me some confirmation bias. I just bought the V2 and O3 for these exact reasons :P

@WarriorLife_fpv Год назад

And Steele isn’t wrong 🤷‍♂️

@ogrows Год назад

Hey Steele, just wondering as I couldn’t see the osd in both goggles when testing but were they both on Lowpower mode 25mbps? It looked like maybe the V2’s were in 50mbps and goggles2 were in 25mbps when testing

@cambellgrey3079 Год назад

Greeting from Aus! Whhat mount are you using for the 03 camera and air unit on the apex 5”?

@DriftaholiC Год назад

I had to do exactly the same thing for fit and even then the screens were vignetted. Gave up and sent em back. I hope the lite versions have the older rectangle lenses.

@sketchpv3080 Год назад

I finally built an O3 quad but the range and penetration seems to be less than my Vistas running 1200mW. I guess I need to do the FCC hack for the goggles when running O3. I’ll perhaps also ditch the stock dual-band antenna from the O3 and use a pair of 5.8 antennas since I’m not using the DJI remote.

@FunkyPhilCovers 4 месяца назад

that’s normal

@gearmodder5648 Год назад

Is there a passthrough function on the dji fpv goggles? kinda like oculus, where you can see what's in front of you if needed?

@ekotechfpv Год назад

honest review and opinion 🔥🔥

@GenCodeFPV Год назад

I have one of your original Mr steele Apex - DJI O3 air camera doesn’t fit well but at the end you seem to have a different camera front holder - is that available or at least a stl - 11:19

@RobinDuckett Год назад

And literally, from a flying perspective, it doesn’t react the same way when it’s flying, I flew both the avata and the o3 air unit. No “ghosting” as soon as you arm. In low power mode it’s less FPS.

@0utdoor_advent Год назад

the line from deuce bigalo was hilarius! 😂

@whereverimayroam74 Год назад

I'm trying to get the goggles v2 working on an iPhone via the DJI fly app but when I plug it in I still get the "connection guide" button instead of the "Go Fly" button. I have the most up to date app. I have an apple cable that goes direct from USB C to lightening. Is there a specific firmware I need on the goggles to be able to do this or a setting on the goggles maybe?

@fpvitall Год назад

@Mr.Steele thanks for the comparison, it just stopped me right in time of getting the Goggles 2. Currently there are to many arguments against changing exactly as you say.

@richardamiss7000 Год назад

I had V1s and wanted to run the 03, so i bought the Goggles 2. After 7 days i returned them and purchased the V2s. Maybe it was just me, but i found the optics to be hideous. Just couldn't deal with not seeing a fully unblurred image.

@user-sz1ij7el9c Год назад

Good afternoon, please tell me how you got the opportunity to display the image from your goggles v2 on the iPhone?

@AIRWOLF Год назад

What firmware are you running on your V2's? Appreciate the vid brutha.

@bacillyfpv Год назад

what do you mean about the walksnail system ? now with some updates?

@WanderinWizard 8 месяцев назад

Same mr steel you haven’t changed much glad to see that. if something isn’t worth upgrading you don’t lie about it. Still sad digital isn’t as fast or faster then analog. Keep up the good work.

@txflyerken173 8 месяцев назад

Where can I find the foam pad that you are using on your DJI V2 Goggles, I just can't seen to keep all the light out.....do the ones your using do the trick?...Thanks!

@KAREKINFPV 11 месяцев назад

Any tips for the best channels and settings to use for LR? V1 used to be channel 5 with iflight patch, and 1200mw.

@SalMacProduction Год назад

Very nice and interesting opinion. I agree with you .👍🏻

@raphael7003 Год назад

wise considerations, thank you. greetings from Brazil

@vietmove Год назад

One thing: goggles 2 records osd on dvr and phone video out, so you can rewatch all stuffs, include long-lat gps (if needed), but goggles v2 doesnt, when the O3 air unit turn off, video transmitter off and all OSD will go.

@JasonStylinski Год назад

How did you get the OSD working with google 2? My OSD doesnt show up every 3 or 4 pack of batteries. Im using FETTEC G4 N, am I missing something? Good review on those two googles

@jlarson42 Год назад

I'm lucky as far as fit is concerned, doesn't bother my nose. No light leak.. I own both sets of goggles. Its much easier for me to get a clear image on the the goggles 2 vs V2. Really like the V2 especially with the wtfos osd. But they have to be in exact spot to be clear. I'm 62, so old eyes I guess. For your flying needs, what you explained makes loads of sense. Happy flying Mr Steele 👍😎

@KOrnhOliO1 Год назад

I have the V2 goggles and got prescription lenses made by a German company named RHO-lens. What a fantastic purchase! PERFECT IMAGE CLARITY! I mean absolutely crystal clear! They cost about $80, but sooo0ooo worth it! They stay put, are precision crafted, and I can't imagine having a more perfect image quality in goggles. HIGHLY RECOMMENDED!

@jlarson42 Год назад

@@KOrnhOliO1 I have those Rx lenses. And for whatever is whack about my eyes the goggles have a very small sweet spot. They are a great set of goggles, and the wtfos osd is awesome. But the goggle 2 is way easier for me to get a perfect image.

@KOrnhOliO1 Год назад

@@jlarson42 Good to know!

@GiffysChannel Год назад

It would be cool to see goggle companies do what the new Beyond VR headset is doing which is custom fitting the faceplate to your face. When you order the headset, you take a lidar scan of your face with an iPhone and send them the 3d scan. They use that to make a perfect fitting foam cushion for your headset.

@jurijavsenak Год назад

Crazy!😄

@AerialWaviator Год назад

That might be possible by 3d-printing a foam insert that is custom. There is soft flamelike material. Check out colorfab if curious of filament properties. Filament called varioshore.

@Bucketheadzie Год назад

Love the goggles 2 personally. I did have to buy aftermarket foam to make them fit comfortably though.

@tomaszboril Год назад

! That was the case on V1 and V2 as well, drastically modified aftermarket foam to fit the previous goggles comfortably.. It is same with the new ones, with added point in nose blocking for some faces. But first modified foam already made it clear in 4:3 elements for me. Waiting for even better one from Ali - haters gonna hate but the screen difference is so good.

@Bucketheadzie Год назад

@@tomaszboril Yep, exactly.

@sos1723 Год назад

You have a flat face and no nose???

@Bucketheadzie Год назад

@@sos1723 lol I’ve definitely never been told I have a flat face or small nose. The stock face plate doesn’t work for me. Maybe having some cheek bones helps so the nose doesn’t have to bear all the weight…I added a small piece of foam just under the bottom of the faceplate that rests on my cheek bones. That fixed the nose issue for me.

@tomaszboril Год назад

@@sos1723 yes i do not have nose, yet able to fly and fit the goggles myself with edits, same as previous and ALL other goggles I tried. None is perfect without edits. Dunno why ppl are mad :D fpv is expensive, goodbye to firmware development on v1 v2 ;)

@flatphrat134 Год назад

Yeah, I can see the difference. well done.

@MotardgeekFr91 Год назад

Nothing to do with X Files dude, you just did the test on low power mode, that's ridiculous... Could you at least update the title and description of the video 🤷

@stst8301 Год назад

Its the same on high power.

@MotardgeekFr91 Год назад

@@stst8301 Absolutely not ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PuGnnXil42o.html :D

@southerndig Год назад

Is it just with the O3 that you can plug into the iphone or iPad and use djifly app for viewing? cause my vistas still don't work.

@ldnwalkandfly8617 9 месяцев назад

Hi there! I did connect the battery wrong by mistake and short circuit the goggles 1 version. Is it possible to repair it? What do you think? Not running anymore...

@angelricords Год назад

Hi, what do you think about the rebind with v2? When I switch vista to o3 model I must rebind every time😢 I ask me if I must return to vista only ?!

@wabbadabbadoodaa2746 Год назад

Hey bre, wangley day, fingely dingely fangely way, zappidy happidy nappidy flay. Also, I abso luv your face. It is cool and very funny at the same time, although mostly funny. I could stare at it all day and stay laughing. Thanks for having such a funny face bre, it's super, and funny. I'm so glad it won't fit, otherwise it wouldn't be as steely.

@jinxfpv6637 Год назад

I had an o3 unit fly like this, and it almost made me nauseous to fly. It appeared to not have left low power mode even though it said it did. Replaced with a new o3 and it works fine.

@vcdroneGR Год назад

Yeah the goggles V2 seem to be a little smoother in motion than the goggles 2 probably due to higher refresh rate😎. And they support the iflight patch antennas without any issues, right?

@rfly-fpv Год назад

8:40 I guess it looks "stuttery" only because OLED have instantaneous pixel reaction time. In Googles v2 you have blurring effect as LCD pixels are not that fast in chaining their colors.

@cheechfpv Год назад

Very informative video. Also I might add that the goggles 2 do not have a anti fogging fan so I’m the summer months they will most likely fog up. My .02.

@rotormasher Год назад

They do have a fan

@changeagent228 Год назад

I got rid of mine too. I will see what O4 brings in Q4 2024. Hint DJI they they need to fit my face without causing excruciating pain to the bridge of my nose and have wide optics like the v1/2 so my eyelashes don't have to touch to see properly.

@BOSS-FPV Год назад

THANKS!!! 👊

@DameMediaVids Год назад

Did you say the V2s can work with the older vistas? Because after my V2s update to the 03 air unit, I can't use it with my caddx vista now. If so, HOW? thanks

@DanielCrist Год назад

Hi, at 9:29 you say the old goggles are cheaper, but in the beginning of the video your chart shows them as being $200 more expensive than the new goggles. Which one is correct?