Why I WOULDN’T Rotary Swap the Radical SR1. My road to getting an SCCA Comp License!! 

I could see Rob making mental notes "oh I like this, maybe I'll try it on one of my cars" with the suspension lol.

This just shows that Rob is taking Pikes Peak VERY Dahm serious! Those Radicals are so much fun! Radical held the record of the fastest "road legal" car on the Nurburgring for 10 years and also had the only 2 cars to do it under 7 minutes, they know their stuff! 😎

You know you're in for a ride when Rob makes a proper outro teasing the next episode...

An outro with a teaser for the next episode?!?! Am I at the right channel?

Rob *finally* getting that formal training he should have gotten years ago. Good to see.

Super excited for Pikes Peak and it’s been great seeing your development as both a builder and a driver. Keep it up!

When rob uploads, you drop everything else

good luck Rob, I just got my SCCA novice license for road racing, it's such a blast man. Can't wait to knock out the race weekends and get that full comp! :)

Rob if you dont know Misha Charoudin, you should look up his new company Vulcan Alpha. Awesome dude diving deep into fabrication and driving on the Nurburgring.

We are stopping EVERYTHING to get 8 more projects started.

Welcome to the club brother 🤘🏻 now we need to race 👏🏻

Rob inspired me to race my RX8, and he consistently delivers helpful information to help me further my own racecraft

ROB. Have you ever thought about paring an electric integrated motor assist system with a rotary engine?

Your video posted at the right time after a long week.. keep them going rob

Super cool vid, I do maintenance and tuning on a customers sr1 and I was at amp twice last week dialing the car in with Tyler. I’m sure it was a great time!

Yesssss this is awesome! That Nik-link anti-roll bar was a very cool design, love to see new solutions for old problems.

Patrick seemed knowledgeable as hell, hope we see him some more if there are follow up episodes!

Awesome stuff Rob. Looking forward to your next video

I always love Radical & appreciate you actually make video to showcase them!

Entertaining and educational. And car stuff! Love it!

Radicals are the Swiss Army Knife of race cars when it comes to set ups. You can hill climb, time attack, club race, endurance race etc with them.

It's a SCCA DSR. We ran a Fox chassis back in the 90's. Wild racing. Even one of the Foster Brothers from Foster Farms did too.

Love this man’s vids can get enough

The nick-link works via bending stress, not axial stress (compression/tension) like he claimed. Essentially it's trying to bend that kink further or trying to straighten it out.

Now in my head I’m imagining would a standard hayabusa turbo kit fit on one of those engines without too much modification, that sounds equally as fun as it does bad.

Well, Rob you got me downloading the Radical SR3 on Assetto Corsa now! I'll have to get some practice in.

It's funny you mention the sway bars on the 4 rotor haha, i remember talking to you about that at gridlife colorado in 2022! I still have been wondering this whole time whether you had plans to add then

You really ought to hit up matt at fastlane. Alot closer to home and you can get way more seat time in.

I plan to get my scca license some day watching this makes me jelly but its a good learning experience

Great content Rob. You're one of my favorite to watch.

Awesome video! 😁👊 My dream and goal is to buy a Radical. Don't keep us waiting too long before you release the next video.

Cool interview!

Can't wait to see him drive these cars!

Glad to see you going to a professional school vs taking the Formula Mazda to a local SCCA school. While SCCA schools are fine you can get so much more from a pro school using their cars. Cool stuff!

Great stuff!!

Some thick rubber turf in-between the press and floor with polyurethane bushings that compress ontop of the press feet with bolts or nuts/studs going into the concrete would work good i think.

Wow Rob took the time to make a proper outro? Highly unusual, must be a good video coming up

been playing Assetto Corsa since 2013 release ^_^ From racing the highways around Tokyo with Traffic to Drifting a local drift track. best sim until AC 2 is release imo.

Great interviewee, that guy knew his stuff.

Do they make a version with the twin hayabusa v8s?

Didn't mention the daddy RXC in the corner.

I feel like Rob just realized how ba motorcycle engines are... 600cc 4cyl can see 14k easy. A 5000 dollar sport bike with only a few modifications and you have the weight to hp ratio of an Enzo Ferrari.

3 months ago "We are stopping EVERYTHING to get the 12 Rotor running ASAP" sooooo that was a lie?

Watch Rob try to fit the 12 rotor in one of those in the future XD

Never thought id see my favorite 2 favorite cars on this channel

You have so many projects going on now 😂, when are we going to see more about the indycar and the 12rotor? What about finishing the 4 rotor?

What happened to the 12-rotor, and Herts 4-rotor?

For the 4 rotors rollbar, a company makes dampers that stiffen when it sees G so you can get away whitout one

Letra goooooo!!!! If you're not first your last

STOKED FOR THIS!!! LFGOOO!!!

Looks like you upgraded your race suit, noice

That ending thouu! Haha😂

Interesting he says that it's close to 50 50 weight distribution, as you don't actually want that in a mid engined rear wheel drive car. more like 40 60 or 45 55 depending on tyre size.

Not the typical Dahm outro 😂

Atlanta motorsports park huh? Sounds familiar... I wonder if DIWD was messing around that day aswell!?

Would be curious to know what a Star Mazda car would do vs the Radical on the same track

Interesting that Rilltech had problems with dry sumps and still used a wet sump setup.

It’s crazy how similar the sr1 chassis it to a pr6

The annual video! 🙏

A rotary swapped Radical would basically be the revival of the Kudzu GTP Lights.

you just know rob is doing that system on the 3-rotor

Does Radical offer a flex fuel e85 option?

Let’s see the 4 rotor with hert!!!

Why do we say “half a dozen”? 😂 6. Just say 6

What's happening with the 12 rotor broski???

You would though. If you owned more than one. A well done NA 13B would be great in these things!

I guess we'll see episode 2 in a couple weeks 😅

I clicked so fast! 😅 💯💪🏽💯

UGH, my favorite Tuber is here, where I live, and missed it, UH

The british make the best track cars. Nobody else even comes close

Rob: Todays episode brought to you by Rocket Money Me: Did he say Rocket Bunny? Whats coming for the rx7s that he hasnt teased yet? Sponsor slot 1 minute in: Yeah nah not rocket bunny you fool Me: Damn, that would have been cooler though.

Put the 12 rotor in the SR1!

Radical have the V8 hayabusa engine right?

Radical produces a hayabusa V8 also

nice

Well it is about time you got in a race car on a track.. A race car that is not in some form of experimental development -interesting as you losing your mind on that rotary art...

8:56 It's hard to figure out how it works, but I seem to get it.

I thought he said "Rocket bunny" and expected a free widebody for the FD

Wow, a preview instead of an abrupt end to the video. What happened?

i really hope dahm saw DIWD's video on the radicals lmao

Rob accidentally made a coherent outro

Bad ass !!

I hope you are doing ok man your eyes look stressed make sure you are getting enough water food to eat and rest please I hope you are taking care of yourself.

Firat good luck to your comp license im still on a simulator

Oh man.... you were 15 minutes away.

Dwight: "Question. Does it still go 200mph?"

ECOBOOST 4 cyl????? What the ford focus ST is going on😎

The one you buy needs a Busa based V8!

No cliffhanger? Slacking

We all know Rob desperately needs a driving coach.

What happened to 12 rotor

When Rob mentioned they would have made the splitter support tubing out of inch and half is pretty cool. I don't think he realizes how much of his car is overbuilt. To get the most out of his car he would need to trim a lot of fat. For example the Rod Ends on the control arms, I think he addressed this in a video but he fixed the wrong the thing. I don't know how much those control arms weigh, but I know it's more than they need to. I'm saying this as a fan BTW, I'm just trying to provide productive criticism so the 4 rotor can be as good as it can. Rob if you read this, I can elaborate on the improvements I think you could make to the control arms, I don't want to type all that out if he don't see it lol

i need next episode

Rob had a hair transplant 👍👌

0:00 Anytime a content creator correctly discloses sponsors at the start of the video, wins my like immediately. Thanks Rob

Robs had a haircut, $hits getting serious!

This guy wants to race up Pikes Peak, he can't even do a full lap of Lime Rock without missing a gear shift.

At first I thought you said sponsored by Rocket Bunny. Rocket Money is way less cool 😆

I just want to remind everybody about TWELVE ROTORs...

Where is this track? It's so nice.