Hey, thank you a lot mate! Pops got me this sweet drone last Christmas and i've over the last 7 months i've gotten quite used to turning it on, doing the quick calibration, and then just buzzing it around! It's super fun, but i was missing out on the features like 'home' and 'GPS flight' as well as the ability to loop continuously from set point A to point B. I hit the homing button for the first time, and a few seconds later I was hit with the barrage of beeps! I got so worried I landed, grabbed my drone and ran back inside to investigate! You saved me a ton of confusion and possible (unnecessary) heartache thinking i've hurt my drone!
Hi, Recently I bought 5g 8k 4k gps wifi fpv drone with hd dual camera obstacle avoidance rc quadcopter drone and drone is going upwards and downward but not going forward/backwards ‘Di’ sound coming when trying, any suggestion,,,
Thank you I hope this helps it might be that I just need to re-calibrate the Joysticks on MindSpire one pro I’ll let you know thank you they could be anything else let me know everything else seem to work fine I just landed it and put it up when you flew my Mavic pro that day
Im having a hard time calibrating my Mavic 2 pro. The Calibrate button won't work, like it won't directly proceeds to calibration setting. What do you think is the problem?
I can't even find the DJI app I've looked and looked and looked tried other apps still can't find it supposedly it's been updated but I still can't find it
I ask you something about my drone , I use 4DRC F5 drone during I start button On in Controler there is beeping fast like beep, beep, beep, beep and I can't control my drone and I can't On
I have a Frankenstein toothpick 818A that acts like it's too far from home upon take off and then proceeds to land right back down.. the battery is good though. I've tried 3 batteries including an 18650 that's fresh. Remote batteries are new and no dimminng.. I'm wondering if a button is stuck.. maybe I'll clean them all..
What do you do if your controller passes RC Cal but the beeping never stops and then it still says RC Cal needed even through you just cal'd it a million times..?
I'm wondering about this too. Might be a sticking button. I'm gonna wd40 each clicky carefully then blow out with air. The only other thing i can think of is the fcc id if it's a microchip feature with faulty calibration or programming thinking it's higher than it really is
@@aninnymoose720 Ive done everything I can think of, Ive watched every RU-vid video and recalibrated the RC and everything else for that matter in every way I could think of and it still beeps non-stop... DJI support had no ideas for me either than to send it in... I took it apart and put tape over the speaker so at least its not so loud anymore... Super annoying none the less...
@@mattpearson8843 i figure figured mine out! I had another board exactly the same and i inspected them closely. What i found was one single tiny littlr capacitor had got knocked off its solder pad and the micro controller i guess detected the open circuit for the A1/A2 motors, thus shutting it down. Maybe something similar happened with yours.
I still can't stop the beeping I have an Android and for some reason I can't get get the DJI app my Android 12 has decided that DJI was a virus I guess. Mine is a DJ I mini SE