Why Is My Washing Machine Not Spinning or Turning? 

Hey, thanks for the video, my washing machine stopped spinning and I followed the instructions on your video and found my washing machine belt on the floor in one piece and put it back on the machine (the belt had not snapped) . My washing machine is now working. Thank you and happy to recommend

I just fixed my Indesit non spinning / tumbling drum by clearing a blockage in the big rubber waste pipe below the drum itself, nothing to do with the brushes or belt either, so you might want to add that to the list of possible causes.

Love you Mr washing machine man,just replaced my washers either help from you,saved me lots of pennies thank you xxx

Wouldn't have known how to troubleshoot without this video. Just replaced the carbon motor brushes and it spins! So happy to have the washer back in operation. Thanks a bunch!!

Thanks man! On my machine the belt just fell off, so it was very simple to put it back on. Thanks!

Thanks for your video. It is very useful. Could you pls help us with an idea. We have Hoover VHD148A and it stopped spinning. The display is working. When we press “start” water is taking the powder from the dispenser, filling the washing machine and when it is time to spin there is just a click sound and that’s it. We can turn the drum manually, we checked the belt and it is on its place. Thanks a lot

Great video - you explained the washing machine is an essential household item that washes ones clothes, else left with dirty clothes. I been trying to watch Netflix on it. Problem solved - thx

I had a Hotpoint for 9 years and no problems. I bought a Samsung not even a year old and the drum isn't turning...

Halp lot change brush and it’s fully working

Life saver, belt fell off, thanks man

Thank you, really helped

..or if it hasn't drained properly it's not going to spin so check the filter/pump outlet right ?

What about snowflake drum wtct802 washing machine that is not spinning and also the belt is in good order and the motor it doesn't use brush but capacitor and all that is workings except to spin???

Hye plz i have a hoover dynamic next one touch i have a problem about spinning they not spinning properly why maybe from the carbon brushes ?

very useful checks - its not the drive belt..

Looked on your site, found new board. I've checked the belt, brushes, all good. Do you think its the board.

The drum on my machine, tries to rotate both ways slightly, rattles and stops. Will still fill and drain as normal but won't start a cycle. Also issue occurred during cycle. Anyway of diagnosing this?

My Indesit Futura HF8B593 drum is not spinning. When I opened the door to check it the drum it appears to be disconnected at the front part nearest to the door. Please, can you help? Thanks.

Mine turns with the belt off but soon as i put it back on again its like its jamming & not turning then it cuts out the bushes are ok ive changed the tacho speed sensor but still getting the same problem its a candy washing machine has ive said before it works perfect with the belt off but won't with it on do you reckon it could be the main board e08 it was displaying but the motor looks ok & new tacho speed sensor fitted plus the bushes have loads of life left in them do you have any suggestions please ?

On my machine the waste pump was blocked by a pound coin, the machine couldn’t empty and wouldn’t spin.

My machines drum doesn’t even turn, What does that mean? The brand is Splendide 2100xc. It’s washer and dryer combo kind of machine.

Good job

Thank you

My Electrolux front load washer is showing an LE59 error code. It won't fill with water or or go through the cycles. I tried running the spin cycle to get rid of any water in it, if at all. But, it won't go into the spin cycle either. Have checked the water inlet valves, hoses, screens, etc. That's all good! When you put it on the wash cycle it sounds like the water wants to come in(humming sound), but doesn't. However, there's water coming out the bottom right side. Not alot, but enough to stand. So, the code is showing to check the drive motor, but, what do I check on it?? HELP, I NEED TO DO LAUNDRY!!!

my washing machine doesnt spin because a lace looks to have went out through side hole of the drum, and wrapped around the hinge. Do you have a video/suggestion on how to resolve such a thing please ?

There are quite a few other issues that could prevent spinning you dont mention.

hi can u please help me, I have a indisit washing machine and the drum doesn't turn at all but the belt and everything work on the rear. Just the drum doesn't move from the front. What do u think is wrong

If the spinner turns harder than normal?

THANK YOU - PROBLEM SORTED WITH A NEW BELT !

After a brush change on the motor the armature of my mashine gets really really hot. What could be the reason?

The higher the spin the tighter the belt

Help I overloaded my indisit innex washing machine,and now it's not spinning out the water it's trying to but not happening...and the drum is moving a lot..

id love to see a drum bearing replacement vid!

my machine won't spin and the code E5E is display my machine is Frigidaire affinity what would be the problem?

what happens when the machine is only making internal sound as if it is washing meanwhile it doesn't roll till it pours out water and soap. My machine is in this state since last 2 months. Solution please.

My whirlpool top load washer works, but it won't go thru the cycles

Why does my washing machine have two red flashing lights and is not working?

wow she's going fast

my washing machine failed to show any error codes, the screen gets light but when I start it doesn't roll, it just gives no motion, no sound....if any advice please?

Hi,hoping somebody can help,i have the indesit widl146,it has stopped working,but the light still works,if i put it on spin or rinse ,the light is on for what the machine should be doing,earlier after being switched off for an hour,it started working again,all good until it got to the rinse stage,it then just stopped,now it just doesn't work,the door lock works,i was about to order carbon brushes,but read the machine would still fill and empty if it was the brushes,thanks

My machine's display blinks and its just stuck nothing is working

Chris, it's coming soon!!

My beco drum will rotate for washing but does not seem to rotate for spinning and clothes are still soaking at end of cycle

Is er ook uit leg in Hollands?

Ta boy. I have this exact problem! Ill be back once ive checked brushes :-)

I loved the old washers that lasted 20 yrs.tjesr digital washer have a Life time of 6 yrs. All junk made in CHINA, they'd like toys.

Top load washer not rotating

Washing machine is an essential appliance for any modern kitchen, you mean every modern laundry room.

Hi, My Toploader LG washing machine drum is not spinning! Everything else is working. The center plastic piece in the drum has come loose also. How do I fix it?

may electrolux ewp85752 no error but not spinning

In other words he has no idea why it doesn't work...

I had an hotpoint for donkeys years and now I've got a Samsung that's only 5 mabe 6 years old and won't spin fills up and empties fast but just won't spin ile never buy another Samsung

My washing not washing

The first 30 seconds of this was totally unecessary. You don't need to tell us how important a washing machine is.

Waste of my time..I could have guessed all that myself..

So basically an infomercial 👎

Thanks for your video. It is very useful. Could you pls help us with an idea. We have Hoover VHD148A and it stopped spinning. The display is working. When we press “start” water is taking the powder from the dispenser, filling the washing machine and when it is time to spin there is just a click sound and that’s it. We can turn the drum manually, we checked the belt and it is on its place. Thanks a lot