Will 6.2 LS Engine Get This 57 Chevy Bel Air to Drive?

Подписаться 439 тыс.

Просмотров 201 тыс.

50% 1

This 4th of July, get the ultimate shine for your vehicle with Avalon King ceramic coating 3-pack for just $99 at avl.kg/robby4july.
Watch us build the 6.2 LS on ‪@SummitRacing‬ channel.
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton...
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #lsswap #chevy

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 435

@RobbyLayton Год назад

This 4th of July, get the ultimate shine for your vehicle with Avalon King Ceramic coating 3-pack for just $99 at avl.kg/robby4july.

@outlaw26aow61 Год назад

That 6.2 looks great in the 57 Chevy!!!

@CycloneTS1 Год назад

@robbylayton When are you all driving through Iowa, or have you guys been through already?

@inekelassooij840 Год назад

@@outlaw26aow61 24:26

@clbzippo9 Год назад

Hi @RobbyLayton I’ve been watching your channel for some time now and I see y’all are at summit racing in Ohio and would like to no if I could meet you and hillbilly there b4 y’all leave

@NICKSSHOP Год назад

you just made that car junk with that just LS nice job should of put an 383 small block small block chevy not that LS that can use ford and dodge parts

@bodeandigs Год назад

Hill Billy may not be the best at delivering his thoughts and actions, but he has more knowledge packed in that brain of his than a brain surgeon does.

@BFT88 Год назад

Yep, for sure.

@robertgee6750 Год назад

The man Hillbilly !!!

@1950harleycharley Год назад

That’s one of the dumbest statements on RU-vid

@Psalmist374DKR Год назад

His brain is WAY faster than the speaking part can keep up with. But the man's getting more smooth in delivery as he allows himself the time to convey the genius inner workings. True story this man is a treasure.

@Rusty_ok Год назад

Hillbilly rocks.

@survivingminnesota8381 Год назад

I love Hillbilly. He's true, authentic and un-rehearsed. Just like most of us viewers.

@rne143c Год назад

Robby what a wonderful video ! I can't wait for you to drive this cherry Chevy home so you can take it apart and do what you do best... Bodywork ! This barn find has a new life and years from now Lincoln could be the most popular kid in high school ..... Thanks again to you, Hillbilly and the Boss !

@robjohnson3376 Год назад

What do you mean cherry ?, It's a shitter with some shiny parts bolted to it, as an add for summit racing. You need to take off your beer goggles matey.

@Wildtr0ut Год назад

I am so impressed with "Hillbilly's" knowledge and how he explains what he is doing and why. He's an "automotive intellectual."

@DarKMatter.1 Год назад

@@theamerican8337I have to fast forward through most of what he says just because I can’t stand all the extra crap he says or tries to say anyhow.

@tjhanlonjr Год назад

Robbie you need to screen print an apron that has hillbilly on it. I would buy one.

@retireddeloach Год назад

Bracketry... this is why I love listening to Hillbilly talk. And, for those of you who think Hillbilly made up that word in his unique hillbilly way, bracketry is actually an automotive term for the mounting hardware used to hold one part to another on a vehicle. I love it! Hillbilly, Robby and Demery ROCK!!!

@WDDetailing Год назад

This is a donation to hillbilly’s lunch fund! That guy is salt of the earth! Can’t wait to see y’all drive that thing back to Utah 🤙🏼

@Unite.The.Kingdom Год назад

That giggle at the end! You guys seem to be having the best time, who needs to vacation on a beach when you can play with motors.😊

@Farm_fab Год назад

Someone put a flare fitting on backwards on that short piece. That's an amazing tool, and wish I had one like it, but ya gotta be smarter than what you're working with. Be careful when put things together, that both pieces are facing the right direction.

@rhondasweeney7271 Год назад

Thank you hillbilly for all the work that you've been doing. Earlier in the video it looked like Demarie wasbored. Awesome video! 😊

@markszyszkiewicz Год назад

Lol...I saw that too! The "Boss" looking sooo bored.

@michaelc.3812 Год назад

Good job with the descriptions Hillbilly. You’re getting better at describing the work you are doing, and you are demonstrating your experience and expertise.

@nestrosbistro2245 Год назад

Hillbilly….you rock, 👍🏼👍🏼 and y’all have the most entertaining/informative videos.🤓thanks for your time..😎

@detroitdiy Год назад

A 6.2 Hillbilly, just think of the burnouts it will do. Great video guy's, I can't wait to hear it running. That sweet summit exhaust is going to be music to our ears.

@Precisionreelworks Год назад

Hillbilly knows the mechanics code well! "Anything is a hammer if you use it wrong enough. Unless it's a screwdriver, then it's a chisel" Channel locks as hammer and screwdriver as chisel 😂 Side note, this car would be sick as a "bare metal Bel-Air"

@michaelwpaulin4876 Год назад

You all are doing a great job modernizing that 57 Belair... looking foreword to seeing the trip back to your home base.. Justin, Robby, Hillbilly and of course Demri, you guys are really Something... Good Luck on the Trip!!

@RealSuburbanCowboy Год назад

Tighten bolts with the BOX side of the wrench, not the open side. Better grip. I love this build. Great channel.

@patcross5799 Год назад

Okay, a couple comments, first off I agree with Hillbilly about a shop apron, except for in the kitchen, I tend to wear an apron when I'm doing any projects around the house. Secondly, I love those wheels, they remind me of the Crager (or however it was spelled) mags that were the coolest things on the road back in the day, chrome wheels were ok, but mags were the real deal. Can't wait to see what this Chevy looks like when you get done doing your magic. Also tell Summit Justin that his doppelganger, who is the son of one of my best friends, lives in Spokane Washington.

@DakotaHarris321 Год назад

It's looking amazing. You guys, I watched the engine install last night. The start up sounds great. The rebuild is going so well. So much hard work that will pay off

@peterlindsay2869 Год назад

You should’ve put a six speed standard in there. Would’ve been a lot more fun. And you were at that point where you could’ve done anything what a shame. I set up Kreggers would’ve been nice too. Lol

@dave5176 Год назад

Let's see. New engine, drive train, suspension, wheels and tires. I wonder if the car can make the 2,000 mile run? Might be kinda sketchy?

@SchysCraftCo. Год назад

Robby and the gang it's really coming together nicely so far. Really cool. Can't wait to see more videos soon my friends. Fab On. Weld On. Keep Making. God bless.

@dgmills5351 Год назад

Amazing how much has been accomplished in a week on this resurrection of a Classic!

@Vegasoutlaw Год назад

Soooooo sick this 57 is coming back to life, keep it up guy's.

@Austin_Younts Год назад

Hillbilly is amazing 🎉Congratulations on the build y’all! The car is looking better then ever. Can’t wait to see it rolling.

@timvanasen9822 Год назад

Hillbilly is a car genius, this build is awesome as I'm a Chevy enthusiast can't wait to see the roadtrip home, then all the chassi & body restoration to make her beautiful on the outside, great video thank's for sharing ❤😎👍

@garlandremingtoniii1338 Год назад

You guys are without a doubt, Truly amazing!!

@JT_70 Год назад

Armor Shield is the real deal (and the special price is a great deal). I put it on my new Tahoe 4 years ago and have been very pleased with the shine and water repellency thought it would be a good time to reapply.

@davebishop8683 Год назад

Awesome! Bumped into you Wednesday. It was good to see you all and the progress of the '57. (Yes - it was good to see Justin also...LOL)

@59vaughn Год назад

It's so impressive watching hillbilly read pictures ...😜

@anthonylee2099 Год назад

You guys are plugging along. Great work guys! Happy 4th🎉🤙😎

@coreytaylor1984 Год назад

Robby D Sparks has become one big sponsorship channel. Bummer, this channel started out so cool.

@COM70 Год назад

0:32 that tackle comment from Hillbilly was so needless, random and absolutely hilarious.😂😂😂 Andy us really taking care of you and making things smoother to install.

@outlaw26aow61 Год назад

The jazz hands at 6:52 was too!😂😂😂

@Ofthe7thSon Год назад

10:57 wow, the boss is bored af…..time to take her shopping, buy her something nice, she absolutely deserves it….

@alexanderwatts8274 Год назад

3rd viewer 👌

@RC.3RD864 Год назад

Hillbilly I'm proud of you!!! You're getting A LOT better talking on camera!! Great job

@johnstancato8785 Год назад

I wish I could have came by summit and said hi to you guys while you were there I only live 20 minutes away

@inmyopinion6836 Год назад

ALL thumbnails of men auditioning for gay porn movie rolls will be deleted and unsubscribed. Sorry rubbie

@RobbyLayton Год назад

See you later!!!

@inmyopinion6836 Год назад

@@RobbyLayton NO you won't !

@kentmckean6795 Год назад

When you are working with extra thick oils, just heat the oil in a microwave for 1 or 2 minutes, until it is hot enough to lower its viscosity!

@keithhogan6997 Год назад

Loved this vid! I just watched the engine install on Summit's channel and it hit me why Justin seems "familiar". In the intro he looks somewhat like and sounds a lot like Ian Johnson from Extreme Off-Road, etc. So much so they could be related. In a way I wish Summit had a lot of these items for the old school (F)SJ Jeeps; it would make my life so much easier! Ah well. I'm really looking forward to the road trek back to Ephraim! Safe travels 😎👍

@aarone3790 Год назад

Awesome video, Happy 4th of July everyone 🦅🇺🇸🦅🎉🎆🎇✨🦅🇺🇸🦅

@miltonbayne6649 Год назад

Will we get a total parts cost in case someone wanted to know the range it will take to do this kind of project?

@kimetherington2252 Год назад

The calibration with Summit is what any GM car guy could ever ask for! I just wish you could break the LS engine in there before the 2000 mile journey back home! God speed when that time comes. Til next time, take care, and we'll see you on the next...

@nikiguymer5840 Год назад

I hope they tell us the grand total cost of the SUMMIT parts used here.that L.S looks nice in there!

@JRs-Garage Год назад

Hopefully you get to stop off at some car shows on the way across the country!

@williamphilo7814 Год назад

Robby, you can push all the lug studs out; and replace them with the correct size for the rotors.

@jordangryg5442 Год назад

if you cut a groove into the screws then spray lube on it let it sit they come out nicely

@natewhiting3431 Год назад

My favorite build on your channel so far Robby. Cannot wait until you get it back to Utah and are able to start the body work.

@UmmmmmmmWhat Год назад

I'd love to see Hillbilly's mind build a ratrod. He basically has an encyclopedia in his head of what random old parts work together even if they probably shouldn't, and an odd sense of "junk style" that make me positive the final results of the build would be epic. The Bronc⭐️ is kinda his offroad ratrod, but i mean something for on road, even if it's a family hauler he'd make it cool.

@ronluna2159 Год назад

HillBilly is the Best.

@DudeStone Год назад

Let's Go Surgeon Hillbilly!!

@TxRiderDave Год назад

Hillbilly is getting it done like a chief! Great job by everyone; divide and conquer is the way with so much knowledge, skill and talent on the team.👍

@quantumss Год назад

What a shame to replace a 4 spd with an automatic.

@llyodreeves4657 Год назад

Keep up the good work love watching you on RU-vid

@509FUN Год назад

This is literally my dream car. Couldn’t imagine getting the chance to cross country road trip it! Wicked cool!

@RobbyLayton Год назад

Check out the awesome engine build here over on Summit Racing’s youtube channel make sure to Subscribe let’s get them too 200k ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Le2FAkNyM8w.html&feature=sharec

@sandyca1106 Год назад

IT'S A HISTORICAL MOMENT!!! ... Both Robbie & Hillbilly read instructions!!! LOL LOL

@Big-chub69 Год назад

Great Job you guys, this is one of my Favorite cars and I am very impressed with the build.

@charlesirby9222 Год назад

I remember when they introduced this beauty in a commercial on black & white TV ... it was the best looking car of the year!

@dave5176 Год назад

I love cats too!

@tacticalbreadman7409 Год назад

You cant weld in the shop at SUMMIT RACING???? gimme a break .. and a tesla in the parking lot...............car hobby is doomed

@DudeStone Год назад

Let's Go Chef Hillbilly!!

@deannalemburg10 Год назад

Already looks cool 😎 with the wheels on ! Can hardly wait to see it on the road

@stoneshrink Год назад

Just FYI, per SAE (and FAA) requirement bolt/nut engagement has 3 threads exposed on the outside of the nut. This isn't a rule (unless you're racing) but it's a good guideline to follow when assembling - why 3? because it makes it quite easy to see (on visual inspection) whether or not the nut has backed off when everything is 3 threads.... are you going to get a ticket? no, but is it good practice?... yes.

@Sydthesloth45 Год назад

Your brave leaving Hillbilly unsupervised lucky he had no 5.0 coyote mounts available to put in 😂

@jackfoubert. Год назад

I love the patina on that car, but with your talent I think you should do a nugget type build on that Beauty.

@dreamlinerkoa6438 Год назад

Seen. The engine build ,, love it 🎉🎉 😅😅 the LS is going to rattle the rust right off the 57 😂😂 ❤

@shaunparsons9610 Год назад

30+ years as a mechanic, I've always used silicone on the diff cover and put gear oil in right away. Never waited and never had any problems

@luketitchenell1263 Год назад

Exactly! So much misinformation in this series, like the engine trans and rear end all being junk. WTH! You were using the clutch to slow the car I believe everything was fine. Body shops shouldn't try to do mechanic work apparently.

@dennispalmer6007 Год назад

@@luketitchenell1263why don’t you tell us how you really feel

@danrose3621 Год назад

I will also have a new heartbeat when I get the 69 charger

@KYBugMan Год назад

I’m sure Summit has a bearing packer you could keep your hands perfectly clean

@huntermcfish Год назад

Paul @fabrats does!

@TheDogLife5225 Год назад

What a rare opportunity to do a meet and greet with local fans.. Summit Racing cookout before heading on the road. Make it happen 😊😊😊. Maybe even a knuckle buster road trip. 😊😊😊

@dvpa1 Год назад

Hillbilly you are the Master💪, best regarts, from Denmark

@128file Год назад

I love your 57 series its been fun watching especially the fact that I live just north of you in Aurora, Ohio and I’m very familiar with Summit racing. It would’ve been fun to have a chance to do a meet and greet with you for the fans here on the east side of the United States.

@charlesirby9222 Год назад

The enthusiasm is contagious! HAPPY FOURTH EVERYONE ... HUG A VET & hand them a beer ... they insure we will have a 4'th to celebrate every year!👈😎👉Semper Fi ... charlie (This 4'th is going to be 'extra special' ... like Historically Biblical kinda special 💥!)

@MM-tw6cm Год назад

The engine is so dwarfed in the bay ! I loooove the stance of the car while driving, it could be idling around the corner- but the look - wuh !

@jgemmell2823 Год назад

Amazing. I thought ALL '57 Chevy's rusted out right above the headlights.

@bobknull7502 Год назад

For Hillbilly. Carter family = peanuts and music. Cotter family = hardware. If you are from Boston, they are both pronounced the same. Other than that, GREAT work.

@ginobragoli1448 Год назад

Will that AVALONKING seal the crack in the windshield?😂 Loads of new parts on to loads of old rusty parts?

@mandemsdad817 Год назад

Justin? is a riot! It really is amazing how much you can do when you have all the stuff you need right there in the shop.

@derekh4943 Год назад

I did watch the Summit video. I was so tire and burned out hearing using the summit bolt on the summit link and the summit hose and summit clap. the summit this and summit that.... OMG the video SMURFING sucked.

@optimoprimo132 Год назад

All these guys are mechanically gifted. Hillbilly not only has knowledge he has mechanical intuition in his Arsenal.

@kraigkline4375 Год назад

I cant believe you ruined a classic .... Stay away from my T-Bird... LoL

@nikiguymer5840 Год назад

Well done robby&crew.I admit initially I thought this POS would not be capable of completing a 2000 mile journey,I’m quite confident it will as long as it stays in one piece!

@charlesbaker7285 Год назад

you're taking 70 back home you'll be going by the $th celebration at Evans Beef Saturday.I'd think the music would be right up Hillbilly's alley.

@BlockCylinder Год назад

"You definitely don't want to over-tighten your bolts, so I'm definitely not using a torque wrench..."

@matthewtucker4636 Год назад

I'm sure Summit has a 5.0 coyote package that would look real good in the broncstar.... just sayin'

@imjabroni1 Год назад

On the distasteful subject of money, we need to know how much all these Summit Racing parts cost. Priceless no doubt, but how else can we know how much to save to rebuild our '57 Chevys??? Ballpark at least.

@davidvanausdle5387 Год назад

Hey robby nice job on greasing the bearings next time flip the bearing over your doing it backwards, it works the way you did it but the opening is bigger on the other side.

@Crewsy Год назад

@12:56 Robby is the first RU-vidr to pack bearings by hand the way I was taught in Grade 9 Auto Shop over 40 years ago. Not sure what Hillbilly is doing. 🤣😂

@indiandoc2 Год назад

Robby I thought hydrophilic was rabies. You gave that 57 Chevy rabies. That rusty car will give you tetanus

@oldinuselesshancox5194 Год назад

Greetings Team Layton from other side Fist up thanks for All your posts Almost always fun Hopefully that'll help that Algonquin So begins old stoner waffle, 1) Hillbilly paint on bike , long long ago when i was worried at how vehicles looked was a paint technique that gave different colors as vehicles passed. Can that b done so tank is Pink from only top looking down ( like when ever HB is doing that standdy walk of broke bike get off rd thing) 2) yep sorry, that armor stuff can it work on say a big tarp like say side of a limo for camping with kids ( some of my best memories) Thanks again for All your work in sharing Wondering how long HB would of looked if it wasn't for BOSS lady 👍💯 🤙🖖

@terencegillespie6675 Год назад

For sure Robby doesn’t want to do another Hillbilly Harley routine. The alliance with Summit Racing is awesome. Wonder how he missed Jegs? Can’t wait for the trip….see if the old rust bucket’s frame holds up to all the new power stuff. For sure it’s a RAT ROD.

@1953travis Год назад

And you never mentioned the Blue Dot tail lights...... "sheesh"!!!!

@MrSpartanPaul Год назад

Why make it an automatic???? It’s got a clutch pedal and Summit sells excellent manual transmissions. I’m crying inside 😢

@samspade7360 Год назад

That lady picked the right pocket so well, she have been a pickpocket! 🤣🤣🤣🤣🤣

@jimmydoverylittle8806 Год назад

I've never seen a guy love him some apron like Hillbilly. Well, except for this one site, but that's a whole different thing..and I never went back.

@ab2230 Год назад

4 x 40 man-hours... 30:55 ? I saw your supervisor doing an excellent job, that's 5 x 40 person-hours -- old trick I learned from an old project manager, you can tell the project is going well if the PM has their heels kicked up, that shows work is going as planned and the PM is in reserve if needed to put out a fire

@billbillinger2491 Год назад

Who swaps a manual OUT for an auto IN?! SUMMIT Has 5 & 6 speed TREMECs that bolt up to your 'LS' eng!

@Capohanf1 Год назад

The year I was born, Dad bought a brand new. white over turquoise blue, 1956 Chevy Belair 4 door that had the gas filler in the fin. I was funny to watch the service station attendants look for where to put the gas in (this was in the day when you did not or in some states COULD not pump your own gas!).

@fishingwithkar4871 Год назад

When you get back to your body shop I don't want to see anybody work except for fixing the holes. Clear coat everything else the frame and everything clear-coated. That patina is beautiful.

@shockdocracing Год назад

You’ll be disappointed on the QA-1 coil overs. Pure junk.

@paulbecker6124 Год назад

Robby, when will you be powering your garbage disposal, dishwasher, washer and dryer with an LS? It seems you put an LS in everything. I figure powering home appliances is a natural progression.