Will This Be A MESS Or A Masterpiece On The Rat Rod Wrecker?

Подписаться 618 тыс.

Просмотров 435 тыс.

50% 1

#fabrats #ratrodwrecker #fabrication
The Rat Rod Wrecker is coming along quite nicely. Today we create a work of art......or did we? Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
We LOVE Onx Off-Road! Get 20% by using code FABRATS-20 or click on this link:
webmap.onxmaps...
Get your own Fab Rat's Apparel Here:
www.thefabrats...
Rat Rod Tow Truck Build:
• Rat Rod Wrecker
Things Are A Little Icy Now In The FJ45 Ultimate Rock Crawler!
• Things Are A Little Ic...
We're Definitely Not In UTAH Anymore! What Did We Get Ourselves INTO?!
• We're Definitely Not I...
We Found A Nasty Surprise In The Seats Of The Firebird Barn Find.
• We Found A Nasty Surpr...
Will This Work? Racing Against Flooding and Quicksand!
• Will This Work? Racing...
We love Barnes 4x4. Check them out!
www.barnes4wd....
Check out Yankum Ropes!!
bit.ly/yankumF...
Use coupon code FABRATS at checkout to save 5% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: thefabrats@gmail.com
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 983

@andylight1051 2 года назад

Plasma table tip- Cut the holes out first, then cut the profile out. This will make sure the holes are in the right position, as the cutout can possibly move before the holes are cut.

@datalorian 2 года назад

Yep, was hoping he would see a comment about this. If they learn a tiny bit about this machine every job, before long they will be experts. Thanks to commenters like yourself with the pertinent info :)

@teamidris 2 года назад

Yep, if you don’t have tags around the edge you gotta cut the holes out first. And even you have tags, it’s still better you cut the holes first :o) (fun with a trumph trumatic rotation 240 CNC punch :D

@amazeddude1780 2 года назад

But you're asking Paul to plan ahead! Ain't happenin'.

@risk_immersed 2 года назад

I was going to suggest the same thing. I love my cnc plasma table for parts just like this. Mines a bit more involved... but still the same results... when used right :)

@jojo1308716 2 года назад

Did or didn’t y’all not know Paul and Ben’s eyecrometers are calibrated to the enth degree. You can’t argue with that!

@wasntme3651 2 года назад

I’m so happy I found this channel because of Matt’s O.R.R. And the Golden nugget build. All the channels that were affiliated with that build are good clean content that a whole family can watch and learn from. 👍🏼😎

@eastunder55 2 года назад

Thank you to Ben or whoever's hand shielded us from Paul's plumber's crack when he was welding the radiator bracket. Whew, that was close. Ya just can't unsee that stuff.

@davidsanders4703 2 года назад

FabRats to 1,000,000 This is by far my favorite channel of all time! Thank you Paul Michelle and Family!

@cane_nation3633 2 года назад

Y’all are one of the 3 videos I always watch on Sunday

@michaelmiller2106 2 года назад

Matt’s and Robby also or what

@popcola1462 2 года назад

Definitely one of the ones I look forward to the most on Sunday.

@sandevilsan 2 года назад

@@michaelmiller2106 dont forget trail mater 😊

@davidburchfield2720 2 года назад

Me to

@theburtseoni 2 года назад

Most of the viewer don't know how big of a project this truck is, the original concept, the fabrication, welding, machining, electrical and mechanical skills to pull this off is just amazing! Keep up the good work, and keep the videos coming please! And Michelle, your editing skills are second to none!!

@dalegnodle 2 года назад

Good show. Hunter's getting more comfortable in his new role and has a great sense of humor!

@loosemoose9799 2 года назад

Paul, you and Ben remind me of the days I ran a lawn equipment repair shop. Parts weren't always available so fabrication was the game. You and Ben don't tell each other it won't work which I had to endure from fellow workers. The secret when not sure about what might or might not work is to let on that you know what you are doing. It surprised everyone even me at times when it worked.

@TheOneAndOnlyRandy 2 года назад

10+ year CNC Laser operator here.... you should always cut your internal profiles first (bolt holes and speed holes) then the outer profile, Because of work holding, being that your holding the whole sheet and not the small parts individually, that way it doesn't move while the small pieces are being cut and give you complete inaccuracy. In fact, I bet that's why the bolt holes didn't line up or even simply drop out the slugs, because the work piece moved while cutting and it didn't complete the cut.... and a bad, fouled up tip wouldn't help any here either

@bigalhudson 2 года назад

Complete inacccuracy is what we all strive for.

@kimetherington2252 2 года назад

What Fab Rats has given us as subscribes is good Family values, with the platform you've created and the content you provide is really a pleasure to watch! With hard work, comes good fun, and with your shareing some parts of your lives shows how well your liked in the comments! I always look forward to what comes next, if it's work or family fun or a rescue of someone in need of help, it's all good content! Thank you for this segment. Till next time...

@SpatialDragon 2 года назад

Need to break into Hunter's Spotify and add Rock, then change his radio station to the Classic Rock station. It is for his own good.

@remorrey 2 года назад

Amazing fabrication, guys. Hunter is a great addition. I like his unobtrusive, but timely interaction with you guys.

@robmitchell4417 2 года назад

I can't wait to hear the wrecker come to life. Enjoy seeing Paul and Ben transfer stuff from their head to the machine they are working on.

@lory2622 2 года назад

Michelle, I hope you read this. Somehow you nail my attention span every time. I an just activating the “push to skip” signal for my hand when… boom, you move ahead. A rare gift, well done.

@artr8285 2 года назад

Paul - Years ago I chased overheating troubles in my FJ with a 350 chevy conversion for months. There was no one fix, but the biggest help was isolating the front of the radiator to the grill. Hot air was circulating around the sides and back through the radiator due to that small engine compartment. Good luck!

@susansmith-franks684 2 года назад

17:55 Love the quick hand block of what none of us need to see! Now that’s a great camera person! 😂

@kenwhitney9146 2 года назад

Thanks for the drive to Orderville! I love seeing the local road driving! The towns are so quaint! More of these would be nice for those of us who can't get out much!! Thanks again! Love that FJ btw!!

@brucep9123 2 года назад

Paul, When you ask if This Wrecker is going to be a magnificent Mess or an eccentric Masterpiece, you already "KNOW" it is going to be automotive perfection. All you need to do is pry all of that excellence out of your mind and into your hands/eyecrometer! Keep on Keeping on!

@stumpynortheast1323 2 года назад

We need to see a video of uncle Shane’s 12 valve ford short bed Also can’t wait to see the tow truck Olympics

@markw.2106 2 года назад

Paul, I feel like I can work on cars until I watch your videos :) I've swapped engines, done pretty much everything you can do with a car or truck, but I have to watch a video first or call mechanic friends or whatever. Your knowledge of every piece on a vehicle, and especially how they all work together, is unreal. "I'll put this in here somewhere, and make this bracket and then pull this piece to the right 3 inches", WOW!

@Blacksheeprc2024 2 года назад

Paul... ditch the mechanical fan for the electeic fans you already have more than you want running off the pully system. It will help keep it cool

@TheOldaz1 2 года назад

Getting the details right always takes the longest time. Thanks guys.

@glenarthur8047 2 года назад

As a former aftermarket A/C installer in the 70's and 80's, I know full well the challenges of making brackets and aligning belt shives. Your's turned out well. You might want to put a brace to the top of the York comp. They can shake and shear the mounting bolts. Ask me how I know.

@lonhoschar1943 2 года назад

Projects, projects, projects... will there ever be an end??.... I SURE HOPE NOT!! Love the stuff you do and will be watching!! Looks like you got a handle on the pulley thing!

@donaldfrazier5244 2 года назад

Awesome fabrication from the fabrats and not a single swear word on camera, just another great job guys and superb editing by the Misses!

@heartsky 2 года назад

Thank you Hunter for your quick viewer discretion blocking maneuver!

@waynewood6726 2 года назад

Paul, I truly LOVE your never-ending optimistic positive attitude. Keep it up! You are such a great role model!

@tomchristensen8619 2 года назад

Just love that a pro like you grab metal pieces while they're still hot. I do it all the time, but then, I'm just an amateur. Guess that's just how it is.

@davefontes8532 2 года назад

Just a thought on the aluminum hydraulic tank mounting. I have seen fuel tanks on fire truck mounted between the frame rails crack, because of the frame flexing, and the tank not. You may want to mount the tank on rubber mounts to avoid cracking the tank. Second thought, why not use a VIA air compressor? They have 100% duty cycle pumps that put out a fair amount of air, with out compressor oil. Love the videos.

@rickerose541 2 года назад

I used to drive a wrecker. Loved the job, not so much my boss. I CANT wait to see this one in action.

@gregj.gotham4402 2 года назад

One step forward, two back, three sideways that’s been my last three days of working on my XJ. I’m watching your video I’m getting so much learning an relaxation from you Paul and Ben. 😊

@davidpay6684 2 года назад

Wow! What a challenge on those belts! The AC compressor is slightly off kilter (28:05). I hope it doesn't want to throw a belt at high RPMs. Another entertaining video. Thanks.

@lonniet.2816 2 года назад

I ENJOY ALL THE FAB WORK THAT YOU ,MATT, ROBBIE AND RORY DO. FUN TO WATCH AND A GREAT BUNCH OF GUYS!!

@americanwildchilds3992 2 года назад

Quick tech tip about your plasma, always cut the holes and/or small stuff out of the part first. Leave the main cut away from the larger piece for last to help keep everything in place better. Also, cut the holes slightly small and open up with a drill for a better/rounder hole.

@UncleManuel 2 года назад

I have to say: Ben and Hunter are a great addition to the channel. The jibberjabber between the three of you is just hilarious! 😁😇🤟

@bulldogsautomotiveadventur4387 2 года назад

What Dad did for an air pump was one of those York pumps, welded two ears on the frame, then a two legged pedestal with a heavy spring pulling it tight towards the fender.

@thomasl6405 2 года назад

If I’m not mistake, Aren’t motor companies paid millions and billions of dollars to get all of this stuff set up and then you include aftermarket companies. But you guys did it in the garage with some knowledge. I applaud you Paul. I thought I knew everything but you are the man with the plan. You amaze me and show what people can do in there garage

@two-strokesmoke7289 2 года назад

It is called "creativity" Thomas.......cheers😁😁😁

@colinwilliamf2391 2 года назад

Enjoy watching the way you make templates out of cardboard as a part of making parts fit.

@optimoprimo132 2 года назад

Ya but can he make it exactly identical and thousands of times over in one year? That's partly why motor companies deal with billions of dollars.

@kadmow 2 года назад

@@optimoprimo132 - ha ha, well yes that part is kind a easy once you have a working design - scale up the plasma tools (CNC makes identical copies sort of easy - ish, lol...

@mikeworkman3593 2 года назад

@@colinwilliamf2391 All cars were sculpted out of clay first, at one time.

@seniorrider9337 2 года назад

Switcher combobulator, I love it Ben! :-) I used to confound coworkers with "that chingaletta thing" over there. I love watching you guys fab stuff up, but I think sometimes you should do as a Captain of one of the ships I was stationed on used to say to his supervisors, "time spent planning an event is time well spent". He explained to me one day what he meant by that; put your feet up and use the thinking part of your noggin to visualize it before putting it into action. That was in 1975 and I have never forgotten it and I try to always apply that concept when I am getting ready to do something, especially if it is something new to me. So when Michelle catches y'all with ya feet up, just tell her " time spent planning an event is time well spent". I hope you never break or throw a belt on that rig. Knowing my luck, it would be the one that required removing all of the others to change the thrown belt. Keep on giving us this great entertainment please, we love it!!!

@johnhenryholiday4964 2 года назад

I broke out laughing when you took your hand and blocked out the a$$ crack scene..... It was hilarious.... I love this channel.... You guys rock.... just watching you I learn so much.... I have a motorhome I want to do some additions to and the fabrication work gives me so many ideas....

@bruceleealmighty 2 года назад

Yeah, I'm definitely expecting some kind of Fab Rat logo cover in the future.

@theburtseoni 2 года назад

When the 'plumber's crack' got edited out, I thought of the old anti-drug TV ad that said- "Just say no to crack"!

@combatkarl965 2 года назад

Crack kills, Ben...

@Myhandle306 2 года назад

@@combatkarl965 it wasn’t Ben

@combatkarl965 2 года назад

@@Myhandle306 if it wasn't Ben's crack, who's was it? I know it's not Paul's, Paul was recording it.

@robertbronikowski6728 2 года назад

Paul and Ben are testament to "what the mind of a man can believe, the mind of a man can achieve!"

@CurtisDrew1 2 года назад

Fun to watch because I'm doing the same thing with a 33 year old Class A RV. Only difference is my engine is under the front floor and most of it is done with mirrors, cameras and a padded board to lay on. Swapped out an EFI 460 Ford to a 400HP 5.9L Cummins.

@dalegnodle 2 года назад

Cool!

@benniehalwood873 2 года назад

Pretty 😎 build, Fab Rats Team. Great team work on the wrecker. I enjoy the shop talk and the joy of building together. Can't wait for the wrecker to fire up and the show. Be safe,.

@Gerb7 2 года назад

I noticed when you cut that part out on the plasma table you cut the outside first and then the inside holes. Its much better to make the cuts inside the part first and then cut the outside of the part. That way it's less likely that the part will move while doing the inside cuts and it will be more accurate.

@matthewtaylor3308 2 года назад

That was also going to be my suggestion. 👍

@wjhjr1415 2 года назад

Yes. 😉

@dr.floridaman4805 2 года назад

Who to trust. The youtube internet expert or the one that did it on video?

@randallsmerna384 2 года назад

Noticed same.

@randallsmerna384 2 года назад

@@dr.floridaman4805 Internet experts for sure! A plan fails for lack of counsel.

@jessiestandridge245 2 года назад

Hey Paul, about the plasma cutting table. it's not that your plasma tip is smoked, you have to tell the machine where it should start the plasma, and you need to tell it to start when it's inside the circle, then move out to the line, and cut it out. That way, the plasma flare at the beginning doesn't mess up the finished piece, it just messes up the part that's being cut out. Hope that helps

@GotToThink4yourself 2 года назад

Huge THANK YOU to the camera man saving the viewing audience from the famous plumbers crack!😂😂

@dougbourdo2589 2 года назад

Ah, the joys of making every dang part to custom fit. Nicely done.

@tonymidkiff2108 2 года назад

Paul the safety glasses are a plus But when you use the 4 in grinder or cutting wheel please use a face shield when that thing comes apart you will be glad you did.

@archieletsyouknow5508 2 года назад

💯 thanks for the little scenic view of your town. Being from the city it will appreciate it

@dougdean3134 2 года назад

Great work. Lots of complicated pathways to sort out to get all of the accessories to fit. Step by step it’s coming together. It’s great to hear Hunter get more comfortable and add his commentary along the way. Great team!

@johnm4661 2 года назад

these design/build/retrofit/trial & error techniques are such prime example the talents these guys have. very impressive. watching this develop on screen is intriguing. Respectfully appreciate the use of eye protection, understanding it can be a difficult transition for many of us - thank you, Paul! nice to hear the young videographer is being exposed to great fabrication talents and history lessons as well.

@bassjumpblues3631 2 года назад

I love my Sunday mornings, watching you all making things happen, Paul, Robby and Matt. Then Chad the brain of wiring. Love you all and need a job like Ed

@slngblde 2 года назад

Paul, a tip for lining up the pulleys.. a cheap laser pointer will lay in the v belt groove and point to the middle of the other groove when lined up. I’ve also seen it done with a laser mounted on a dial indicator base where it’s positioned to shine across the face of the pullies

@williepelzer384 2 года назад

Or a really good straight edge, been using that method thousands of times for about 50 years. 🤔

@roygotham 2 года назад

I don’t know what to say other then you guys are truly amazing at fabrication to make THINGS come together to work!!!! Thanks for sharing the adventure of creation!!!😅❤

@netwizzard 2 года назад

Pro tip, There is an oil passage in that Yorx under the head you can close with a small screw to make it blow far less oil.

@rickska5437 2 года назад

I used to “lengthen” or oval the holes for York compressors, so it’ll slide for belt adjustment. Or some 80’s fords have built in adjuster pulley on stock bracket that can be modified for belt adjustment. These build videos are the best. Can’t wait to start building custom stuff again.

@madcratebuilder 2 года назад

All the accessory mounting is a pita, never enough room. You came up with a clean install.

@panamared354 2 года назад

Overheating? I mentioned in the video when you were fabricating the exhaust. Running the exhaust in front of the oil pan could overheat the oil which would make the engine run hotter. Just an observation, don't know for sure. Try a oil temperature guage to see if that is what is causing it. Enjoy watching your videos.

@mikerequa820 2 года назад

Wrecker looks better every time ya'll show it. The coronet sure is lookin sweet over there. Thanks for sharing be safe have fun

@wackowacko8931 2 года назад

You might have a problem with how you set up the York air compressor. It is not commonly known, but you aren't supposed to run an accessory off of the water pump pulley alone - you have to run the belt so that it loops around the crankshaft pulley also, so that the crank is the primary source of power. Otherwise, the belt will just slip. This is particularly true when trying to use it for something that draws a lot of power, like a compressor or alternator.

@mygarden365 2 года назад

So true : D

@randallsmerna384 2 года назад

Interesting point! I am wondering why Paul is using so many belts instead of just a serpentine or two with tensioners... I know that would require more components to be in alignment with the crank pulley but it doesn't seem impossible.

@williamtarpley4025 2 года назад

International trucks ran York a/c compressor off accessory drive no problem other than adjustment bolt breakage

@ronaldblue8713 2 года назад

Use a flat belt tensioning pulley like a lawn mower deck uses and spring load it so it is always tight. Great job on things. No small feat.

@DandDClark 2 года назад

I love that Hunter gets so excited about how Ben dropped the drill oil and it landed straight up and down, and Ben looks at the camera like "Yeah, I do that all the time!!"

@kennethfulgium2021 2 года назад

He meant dropping stuff. I have this issue with washers,nuts and bolts

@petermccuskey1832 2 года назад

Great free hand work. Cut center of bolt holes first and then finish.

@nopartsgarage6691 2 года назад

Lots of fab work going on there,, thats the best part.. that tow truck is looking awesome .. cant wait to see the finished product.. im sure it will be cool as hell

@freeidaho-videos 2 года назад

CNC plasma tip: cut the perimeter last, holes and internal details first. Which I see you did later on. I'm hoping one belt is enough to run the air pump, and I bet you are too :) Ohhhhh, a little teaser on the front wedge right at the end. Well played.

@ModernDayTemplar606 2 года назад

I should have said it a while back. Hunter has made a great addition to the shop. That was some great fab work. It won’t be long we will see Paul jump in and fire that mudder up. Ohh yes Paul you need a new welder that one is stupid it won’t even work unless you turn it on. What’s up with that. 😅

@brucescott4753 2 года назад

Air compressor belt adjuster. 78 Ford truck a/c belt adjuster. Gates 38039 idler. Also one of the guys at work builds street rods, says those type radiator hoses always leak after a while.

@dallasyarbrough 2 года назад

I love watching Matt’s channel, it seems like they try to be precise, methodical, and have nice things through out the project and the finish product. I do appreciate the “I know what I want but don’t know how to get there yet” approach! Reminds me too much of my projects! 😂 Also the amount of knowledge both channels have is incredible!! Maybe a collaboration build of doing something near impossible?

@martysmilt 2 года назад

@ 5:28 or so, to make a flat offset on a bracket use spacers at the appropriate place and squash the offset in the press you get exact flat and correct distance every time.

@jamieworden4061 2 года назад

Hey Paul, it was pretty awesome getting to meet you, and the others yesterday on my way through there. I enjoyed the short visit, and the opportunity to see the shop and all your "toys" around the shop. Thanks again and keep up the great work. I should've stolen a Mt. Dew yesterday, dang the bad luck. Totally missed out on that 1.

@jasond.kennedy7362 2 года назад

really enjoy the working tutorial, for more understanding of what's going on as you fabricate all your projects, thanks for sharing

@psg6314 2 года назад

Your dad would be proud of you awesome build and great video keep up the good work God bless from GA stay safe

@paulcooper2897 2 года назад

Shop life ... don't think it gets any better, even on days when things don't seem to go right. Thanks for sharing 🇨🇦

@marklowe330 2 года назад

I use a straight edge or metal ruler across the front or back edge of the pulley to align my belts when making brackets. Keep up the good work. I enjoy watching.

@mygarden365 2 года назад

This is the best way to do this ~ eyeballing it might not work too good ; )

@brapbrapmafucka 2 года назад

Straight edge will work but u can use a dollarstore laserpointer

@wooodrow99 2 года назад

My LS6 swapped FJ 40 had a cooling issue that I couldn’t cure no matter what I tried. Ended up installing some 3/4” spacer blocks on the rear leaf of the hood hinges and it worked like magic giving the heat a place escape.

@hillbillyhippie597 2 года назад

Good morning thank you for the entertainment. I like the Forest Service Nomex shirt you have for welding 🍻🇺🇸🤙🏻

@uncleeddiesspecialties 2 года назад

I don't what it is about workshops & garages, missing parts, missing tools, ya buy the tool you were missing & like a few days later, you found the one you lost. Of course this several times over the years & you end up with 3+ sets of various tools, then you have to get bigger cabinets & eventually a larger shop, it's a vicious cycle I tell ya. Rat Rod Wrecker coming right along, looking mint. 👍

@ecclesmilligan8712 2 года назад

As you are getting a high output welding alternator I assume there is some reason for not looking at electric air compressors and electric AC pumps that could be mounted on the rear of the vehicle? Would simplify the engine bay setup and layout.

@mygarden365 2 года назад

Or you could have a compressor/gas motor to run that ; )

@kolton5543 2 года назад

Compressors require a huge amount of electricity. There's plenty of 12v compressors available and do a good job but none of them perform even close to a York compressor. I have a Puma 12v that pulls around 60 amps and can barely run air tools. I also have a Geo Metro AC compressor converted to air and it moves about three or four times the air the Puma does. As for an electric A/C compressor, there's not really anything available for exactly the same reason. There are some on hybrid and electric vehicles but they operate using the high voltage batteries do reduce the amount current needed. A 12v A/C compressor would require easily 120 amps continuously to work.

@raygordon9852 2 года назад

I think Gram was right force air in and forces air out. I love this channel.

@TrzCharlie 2 года назад

Wow Paul, your patience is commendable. Especially for being "an old guy." Hunter, you better duck next time those words come out of your mouth....Great edit Michelle. Thank you all.

@UmpTSquat 2 года назад

I love classic rock and love listening to classic rock stations. I have never heard the term, "but rock". It is amazing what you can learn from the Fab Rats RU-vid channel.

@jhi3337 2 года назад

Hey Paul. It's best to cut holes first, especially on small, lightweight parts.

@sumo_steve45 2 года назад

"Hunder" covering up the butt crack was hilarious. LOL You guys freakin rock - love to see ya'll just working and figuring it all out.

@edgeofeternity101 2 года назад

I have used this method for "tracing" a pattern when it's out in the open like the end of the head. Use a piece of paper and a lumber crayon, and rub the crayon lightly over the detail you want, it works amazingly well. You get a sharp clear image with little distortion.

@troybilt6752 2 года назад

Thank you for your time.

@quentinkeller5254 2 года назад

Sure am missing some of Randall's commentary while Paul's asking questions.

@trevorseitz502 2 года назад

I've ran an industrial laser and cut material from 3/8ths down to 20 gauge, start with the small holes first when using a robotic cutter. It reduces the chances of the part shifting causing the holes be out of spec.

@bryancondrey6457 2 года назад

Those york compressors shake like the devil. They are robust but use as many bolts as available-bonus you can use the opposite plane as another mount.

@Zeus_a_Gentle_Staffie 2 года назад

Love the banter in this shop. It’s taken another turn with the Hunter cam stirring them up. 😂😉🤭🤔

@donluthy8637 2 года назад

Don’t know if you could ever truly realize how blessed you guys are to live in the world you live in. I live over here in Missouri and am very jealous every video I watch! Love watching you guys!

@jethro83100 2 года назад

Ben, you're such a great fit for the channel. Tell Paul, I mean Michelle you deserve a raise.

@JeepsRtheDevil 2 года назад

Ya know...a Mötley Crüe sticker would add at least 9 hp to that unit...😁😎

@JanelleVocate-Ames 2 года назад

tee hee.....

@CarswithNash 2 года назад

That’s time consuming work getting that all set up and aligned. Nice progress.👌

@terrywells3955 2 года назад

Paul , Ben ya'll are doing a fine job keep up the good work...

@MikeBaxterABC 2 года назад

26:19 Paul has the vice grips on upside down, that's why it slipped out. If you put them the other way the rotational force tends to make it grip MORE, rather than loosening.. Same as trying to use a pipe wrench upside down.

@leonardbixler102 2 года назад

Just use the electric fan on the radiator. No need for 2 fans. Also on the FJ are your blades configured to pull or push the air through the radiator. Might can just reverse the polarity and pull through the raditor.

@russellhltn1396 2 года назад

About the FJ, usually the air goes out the bottom. Is that all blocked up? And what was the results of your test run?

@michaelsimmons6138 2 года назад

As far as we are concerned you guys have the best job your doing what you love to do with your brother and family that's a win win we think you guys and gals are great people keep doing what your doing 🙏🙏🙏🙏👍👍🇺🇸🇺🇸🇺🇸

@johnme7049 2 года назад

So long as he doesn't start going, "OK BOOMER"! You really do need to teach hunter what REAL music is though. I love how you show just how difficult real fabrication work is. Not everything comes in a kit that fits together. Oh well, it's coming together nicely. Youll be going after that 2ed place trophy before you know it. :D Love you guys, God Bless you all.

@TryhardEh 2 года назад

Hey Paul! Love the videos. Just a little tip with the plasma cutter. Try cutting the holes before doing the outline, otherwise the piece might move while it's doing the holes. Love watching you guys work, I've learned a lot!