I can't stand when people spend the first half of the video proving the gun is clear. Or worse, then they do the entire video with the slide locked back. This was a breath of fresh air!
Installed Armory Craft tungsten rods ($21.95 / 5 mins) in mine, which makes it even sweeter. Rounded trigger guard = more holster options. Worth the $.
@@aaronhartsfield9951 they make the frame heavier and the gun heavier softening felt recoil a bit. Myself, I find it uncomfortable to carry a boat anchor around all day.
Was going to go this route with my 357 Sig compact but ended up going with the X compact frame (small). I have short and fat fingers. I may try out the medium if I see one in person and see how I like that.
Got a Sig P320 full size and loved it so when they became available got the WC Sig P320 in carry ( I dont keep up with all the alphanumeric designations) Never gave the grip shapes a second thought, they fit my semi large hand just fine.
You're preachin' to the choir- sort of. Been a big fan of Wilson Combat grip modules for the 365 for months now. Have the black grip module on one XL and and FDE on the other. Also Tactical Development sells some WC mag base pads for both the 12 and 15 round mags that really match the grip modules. Not sure if those exist for the 320 platform or not. Really hoping Wilson Combat releases a grip module for my XMacro which will be just about perfect if they do. Wilson and Sig make a pretty good team.
Gotta say, I just got a full-size P320 recently and I really like it! Put it in a small X series module and it feels great. The WC was out of stock, plus I couldn’t feel it first like I could with the Sig grip. Either way, I’m very likely going to end up with another 320 so nothing will be going to waste lol.
Holden McGroin I bought a Sig 320x Compact and it came with the small module, well pretty sure it's the small module since it never said on the box but I measured the module the measurements were closest to the small module measurements that I found in a drawing. My problem with the small (?) module is my strong hand fingers wrap almost completely around the grip and don't leave much space to put the palm of my weak hand so I end up placing my weak hand palm on top of my fingers and it feels weird I've been trying to find some way of knowing for sure if I actually have the small grip module and then I can decide to go to a medium module or not, that is IF I can find a medium grip module in black anywhere. I like this Wilson module but don't know if it will make my "Weird Grip" better or worse with the extra undercuts and palm swell Is there any way to know for sure IF I do have a stock, small module that came on my pistol and does Wilson make/sell a medium grip module for a Sig P320x Compact?
That's a nice armory craft trigger you got there. I got my wc grip module in yesterday, and I know what you meen. It feels like holding the grail in my hand.
I purchased the same grip module thinking it would fit the slide of Compact X but of course that slide is about 1/2 short for that grip module. Which slide is that you have on it in the video, Full or Carry Size?
Does that W/C grip hold the 17 round mag? If so, what's the model number? I have the full size p320 and the compact as well. I need the grip module to pit both.
The grip module in the video holds 17 rounds. On the Wilson Combat site it's called: GRIP MODULE, WCP320, CARRY, NO MANUAL SAFETY, BLACK. My 320 was a compact before I put the carry module on it. I would recommend you get two different WC modules so you end up with one specifically meant for your full size.
Thank you, Rick. I have a Wilson Combat 92G Tactical Centurion, and the grips on it are very sharp and uncomfortable. Would you kindly recommend replacement grips for my gun?
I don't know anything about aftermarket grips for Beretta. I'm assuming your grips are G10 material, so if it were me I would just sand whatever spots are uncomfortable for you until they feel right, being careful not to take too much off at a time.
It's just a piece of polymer like any other polymer frame, so it's light as a feather. It includes a feature of tube slots you can put tungsten rods in to make it heavier if you wish. They are sold by Armory Craft.
I had sig x carry 3.9 Barrel every time I fully loaded it 17 +1 it was extremely hard to rack I thought I had to break it in but 500 rds later did same thing really disappointing in sig. I seen a lot of people having this problem
At 64 bucks you really can't beat that. I'm thinking about buying another Sig so I can do this lower and the aluminum one that Icarus came out with. It's funny, I pay too much for my weapons to begin with, and after I buy em, I put even more dough into them. I thought boating was expensive...lol...this is going to make up for every deficit I ever committed. I fucking love guns of all varieties. Rick, it's okay to say fuck out loud. I do it all the time. Check out Icarus. Their lowers are almost four hundred bucks. I don't give a shit, I'm buying it anyways. I love impulse shopping when I enter pawn shops.
The WC320 grip module is compatible with all current production X-Series basepads, so if your ETS magazine fits in an X-series SIG, I must assume it would work fine.
@@rickyboyfloyd Thanks. It makes no sense that I just spent $50 on new baseplates to make my P320 magazines compatible with the X-Carry and the Wilson Combat grips. The whole point of the P320 modular design is that the trigger assembly can be used in different grips...while using the same magazines. Anyone else confused too?
I would assume that they would work with the P250 but, I would ask Wilson Combat to confirm. The grip module pictured is for the 17-round newer square-baseplate-button mags.
I just put one on my m18 I payed way too much for. This grip is amazing. You just wanna sit there holding it in your hand. It’s almost like some sort of sexual attraction 😂.
@@rickyboyfloyd X compact module accommodates a 3.6 inch slide, carry module fits a 3.9 inch slide... if you put a carry grip on a X compact slide, it’s gunna look funny, because the rail will extend beyond the slide slightly.
It was never meant to be a gun channel. I just post gun content once in awhile, I started that late in the game, it was always just my RU-vid page. But you're right, I do need a dedicated gun video page. I just do them so infrequently.