Hello and welcome to my latest tutorial.
To make this pendant you will need -
• 0.8mm wire (20g), 4 x 11" (28cm)
• 0.3mm weaving wire (28g) approx 200cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• Crescent moon shaped cabochon, mine is 25mm, and 15mm at the widest part (you can use a different size, just remember to adjust wire length and weave repeats accordingly)
• beads, you'll need a selection of small beads, ranging between 2-5mm
I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)
How I oxidize my bare copper - • Oxidising copper jewel...
Facebook - / kellyjoneswirejewellery
IG jones_kel
My Etsy store - (where you can see my tutorials and jewellery for sale)
www.kellyjones...
Thanks for watching x
18 сен 2024
