Wiring 12v Car Accessories To Toggle Switch (Andy’s Garage: Episode - 95)

Подписаться 77 тыс.

Просмотров 323 тыс.

50% 1

Andy Phillips shows step-by-step how to wire a 12volt toggle switch to car accessories with an in-line fuse. This method can be used for LED accent lights, radiator fans, fog lights etc.
DISCLAIMER:
The individual featured on the Phillips Vision RU-vid Channel identified as Andrew Phillips, also known as Andy Phillips is not a professional mechanic, contractor or certified repairman. He does not have any formal training in the automotive field, or any other trade. He is strictly a Do It Yourself handyman.
Phillips Vision, or the individuals featured on this channel, assume no liability for anything you choose to do to your vehicles, appliances, games or any other items featured in the videos before, or after watching one of the videos or utilizing the content from this channel.
All Do it Yourself (DIY) repairs or modifications you perform are at your own risk. Proper safety precautions are always needed, and are the responsibility of the viewer to follow. In some cases, even if you perform everything properly, you can destroy or damage one or more things you are working on resulting is costly repairs.
In addition, if for some reason, the instructions on this channel are incorrect, resulting it something becoming damaged, Phillips Vision and those featured on this channel WILL NOT reimburse or pay in any way the costs that may be incurred due to following wrong instructions.
PLEASE DO NOT PERFORM ANYTHING SHOWN ON THIS CHANNEL (PHILLIPS VISION) UNLESS YOU FEEL COMFORTABLE AND CONFIDENT TO DO SO.

Авто/Мото

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 308

@PhillipsVision 5 лет назад

I forgot to clarify on the video that the gauge of wire used is determined by the amps of the accessory. Items using 10 - 15amps can use 18 - 16 gauge; 20amps use no less than 14 gauge

@parmindersidhu9690 4 года назад

Hi so i will only have one fuse right as i will have one wire comin from the battary to the off switch an then one wire which is connected from my led an lights passing trough a fuse then connected to the on switch an the ground wire from the devices i can connect to my car battarys ground right please let me know also what amp do i need for the fuse what fuse can take the lights i have do u know

@PhillipsVision 4 года назад

Vlogstar Parm yes, one fuse located between your 12v power (Battery) and the toggle switch

@parmindersidhu9690 4 года назад

@@PhillipsVision what fuse do u recommend im goona use 18gauge wire wire

@PhillipsVision 4 года назад

Vlogstar Parm 15amp fuse should be fine, but double check the draw of your accessory

@parmindersidhu9690 4 года назад

@@PhillipsVision ok thanks what is the draw as the led light show 12v power an number of led lights on it thats all

@joeyw4442 Год назад

Great video. Thanks for the instructions. Wired up a toggle switch for my third function valve, with in-line fuse, on my tractor so I could turn it on and off as needed.

@triedandtruefoo 2 года назад

Setting up my 1978 MGB with toggles on most functions. Wipers, fuel pump, fans, I just love toggle's lol. Thank you for a great video buddy!

@PhillipsVision 2 года назад

Glad it helped👍

@TerrionCarter 3 года назад

For months I've been puzzled, this cleared it up. Appreciate it 💪🏾

@x-i-clap-ttvs7876 3 года назад

I hooked a light bar up to my old car and idk how i did it lol im lost

@ralphmoungle9470 3 года назад

Phillip your video helped me tremendously. I was able to run my inline pump perfectly. Your step by step instructions made the difference. I appreciate you buddy.👍🏽

@PhillipsVision 3 года назад

Awesome, glad it helped

@BTunaTTV_YT Год назад

@@PhillipsVision is there a way to connect a 12v 2 prong on/off switch using this method and connect a led strip to the switch? The idea i have is connect on/off switch to fuse box using fuse taps and connect led strip to the switch

@Enrodyzeus 3 года назад

One of few people who clarify the wiring diagram. Thank you lots man!

@PhillipsVision 3 года назад

You’re welcome, glad it helped 👍

@art_by_adrian2913 Год назад

I have never seen a fuse added like that wow thats epic 👏

@HunterSydenhamRacing 2 года назад

Got my hands on my first rally car. Need to do some wiring and this helped me understand concepts heaps. Thanks mate 🇦🇺

@PhillipsVision 2 года назад

Cool, good luck👍

@chrisrocker1108 3 года назад

Wiring LED lights to my motorcycle using a toggle. Now I know how. Thank you!

@PhillipsVision 3 года назад

Glad it helped👍

@chriscrooks8617 3 года назад

Kool vid now I can add toggle switch to my switchback DRL thanks for your info

@jeffreybaumstark9298 3 года назад

I too have been puzzled about switches and how to properly wire this this video was exactly what I was looking for I'm no longer confused thank you thank you :)

@PhillipsVision 3 года назад

Glad it helped

@mikesmith3962 Год назад

Broke it down made it very simple to follow, thank you alot

@samchiu4339 4 года назад

Good video, btw i wanna get opinion from you, im planning to set up 1 switch for 2 pairs DRL (front & rear). Power source from ACC fuse box to fuse to Switch, wiring from Switch to DRL1, use SnapLock to split wire for DRL2, then use SnapLock again for pair connection for both DRL. 1. Do we still need that fuse before Switch if the power source were already from ACC fuse box? 2. Is the power supply sufficient? 3. My RockerToggleSwitch listed as 12V 35A, is there any problem using a 35A switch for low power LED DRL(i believe its below 2A?) or do we need to find low amp Switch? Thanks much!

@chrisdesimone4249 8 месяцев назад

Thanks for an interesting (solid explanation) video on basic install

@AljPropertyServices 3 года назад

Great job. Keep up the detailed work. God bless you

@PhillipsVision 3 года назад

Thanks, I appreciate it

@parmindersidhu9690 4 года назад

hi see the fuse the wire go in to can i hide that basically make put it in behind the car trim to make it look tidy an then jus have the fuse out like with all the wires behind the car trim like next to my seat didnt really know the right words

@cavanblack 4 года назад

This video was extremely thorough and clear. Thank you.

@PhillipsVision 4 года назад

Cavan Black thx👍

@vickihuddle9013 2 года назад

Very informative, Thank you!

@reefgratos2035 3 года назад

What about aux light kit that usually come with dongle switch with relay? Id like to replace the ugly dongle on/off switch with safety cover trigger metal switch.. but those trigger only have two connecting point.. dongle switch with relay have 3 wires.. how do you replace the dongle switch with trigger switch? Do wee need to remove the relay from the loop?

@cheechchong6470 3 года назад

Thanks for the extra knowledge 💯👌🏽

@roamizane1484 3 года назад

Thanks for making it so simple

@alexandergavrilov2566 Год назад

Thanks for the video. One question - why can't you put the switch on the ground wire?

@harryharrison8274 4 года назад

Good video lol I messed up an grouned the switch just about burnt down but luckily I unplug it in time gonna try this an should be fine

@wallyringo463 2 года назад

Thanks for the video very helpful.

@whosjohnny 3 года назад

Great job very informative and to the point thanks

@PhillipsVision 3 года назад

Glad it helped👍

@jonathantenorio8829 2 года назад

If you are connecting a multimeter that had power/ground/remote. Do you need a toggle switch that has 3 connectors?

@shrtbus44 Год назад

If my fans work but i just want to add a toggle switch as a security measure can i just splice into the fans power and leave it grounded the way it is? Or will i have to splice the ground and ground it again

@Sir_knight_trooper 5 лет назад

Thanks for this!

@PhillipsVision 5 лет назад

Martin Williamson my pleasure 👍

@ryanmitchell4117 3 года назад

Finally! Somebody that really knows what they're doin

@petittrainguernsey3297 3 года назад

No he doesn’t, he’s dangerous. Use a relay for auxiliary fans. And a proper inline fuse holder. This is nothing but a bodge job that will cause nothing but problems in the future.

@rogerkrein8832 2 года назад

I found that your video is very helpful thank you very much

@mariazaragoza8686 3 года назад

I’m trying to connect my toggle switch to my amplifier but my question is this do I connect the ground from my amp or do I look for it from wiring in my car? I’m lost please help

@crypttonite 9 месяцев назад

& a switch that has 3 posts? can i use it as 2, is 3rd post usually connected to ignition?

@richardshortridge8052 2 года назад

Is wiring fog lights the same principle as this? I'm installing fogs on my Dodge ram with a toggle switch

@DaniSpooks 9 месяцев назад

should i put tap or somthing around the fuse to keep it more secure?

@MiguelGarcia-ky3jh 4 года назад

You are the best, thanks for your help

@PhillipsVision 4 года назад

Miguel Garcia you’re welcome

@351clevelandmodifiedmotor4 3 года назад

1:24 already done the electric fans no fuse strait to The battery need to wire up a windshield whiper motor, rats chewed up wiring to the controls I have two switches one intended for the water squirter , i want to wire another motor to the battery and have two switches running from the cab to the battery. Any ideas? Pleas help

@LOSTnTOKYOMTP 3 года назад

Do I need my condenser fan to keep my car from overheating

@sigsauer8386 Год назад

Ottimo lavoro 🎉from Italy

@brodyrichard263 Месяц назад

What about a amp for a stereo on a motorcycle amplifier. It says I need a switch added what is my easiest route as far as wiring do I just use the positive wire only In and out? Please help

@kidd6055 9 месяцев назад

So the ground wire is running from the radiator fan to the the inside of the car grounding to the main ground of the car under the dash?

@noahgregory1318 3 года назад

Super Helpful!

@PhillipsVision 3 года назад

Thx

@user-iw4zw7qg7f 6 месяцев назад

Great job man

@PhillipsVision 6 месяцев назад

👍

@_.skipp4x 2 года назад

Would this work for aftermarket gauges? The lights on the gauges to be exact. I have a 79 Monte Carlo and the gauges have a light that always on and it drained my battery 🤦🏽‍♂️ I want to be able to turn the lights on the gauges off and on.

@PhillipsVision 2 года назад

It should

@LLCBOYZ Год назад

What if it dont work no more.? The Bird was sitting in the repo yard for a whole week and im positive they didnt toggle the switch to off. She was clicking so i came back with a battery it does nothing. I dont hear my fuel pump my fans stop working only one headlight working now. I only had it for 2 days i need some advice before i see what im going to do with it. I just bought a fuel pump, starter, alternator and thermostat, thermostat hose, i see one wire disconnect from lower engine bay on the left its no other wires connected think its on the positive battery side but im not sure how he wired it i see where it goes to but im clueless after that i work on my own cars unless i pay a mechanic to help me because I need advice and extra hand.

@hannahwiita3524 2 года назад

So helpful

@celestewilson9226 Год назад

What if you've got an LED balcony system with a wiring harness it's just simple red and black wires going to each light into a switch do you need to put that inline fuse on there to connect it to the switch in the cigarette lighter what do I have to do I really need some help

@celestewilson9226 Год назад

I want to put the switch in my little cigarette lighter thing because I don't use it so I figured that's a good power source how do I do that please help me

@hakimdurand8427 10 месяцев назад

that toggle switch for the accent lighting is exactly what I want to do

@MrDaCharle 2 года назад

How can I get a main line power source from the battery I side of my car for future wiring with out running each positive cable from my cabin to the battery. I hear you said you have a main line hub . Can you help me plz

@PhillipsVision 2 года назад

You can get a control panel strip that the main battery connects to . From there you can run several accessories. They can be found on eBay and other online stores.

@petittrainguernsey3297 3 года назад

I would be using a relay in that circuit. Rad fans are drawing quite big amps and things are gonna get warm using your method.

@TooBlessedToStress88 3 года назад

Agreed. Relay plus 12ga wires would be my recommendation

@JamesRazorbacks 2 года назад

Yes at least use 10-12 gauge wire I used that thin wire and my switch got way to hot and started smoking

@orlandovega6986 2 года назад

Proper way is using Relays.

@joeradler Год назад

Thanks for this tip to add a relay and use 12g wire as my switch DID get hot using this method and 16g wire (only the load wire side got hot, though the accessory out wire stayed perfectly cool). I now understand the too-small wire problem but can someone explain (1) the overheating load wire while out wire remained cool and (2) what a relay will do to solve this problem?

@petittrainguernsey3297 Год назад

@@joeradler Relay acts as a switch, keeping the circuit the fan is on separate. Don’t forget to add a fuse on the positive side. Wire getting hot because it’s taking the whole load for the fan and switch. Fans draw large amps so it’ll get warm if not thick enough. Putting a relay in keeps the circuitry for the accessory compact and isolated.

@wizard_customz 4 года назад

Wow bro lots of knowledge thank you so much

@PhillipsVision 4 года назад

tenshi has a death wish thanks man, I appreciate it

@wizard_customz 4 года назад

@@PhillipsVision no problem bro.. that car looks so beautiful man that interior is nice the way you have it set up.. I was dazzled when I saw it.. I'm currently installing an afr guage but instead of powering it to my ignition like recomended.. I'm doing a toggle switch right under the guage wired to my battery .. with a fuse in between like everything I learned

@PhillipsVision 4 года назад

tenshi has a death wish 👍

@southflvon 4 месяца назад

Is it possible to do this for headlights?

@bradthomas7179 4 года назад

Thanks!!

@JohnWick-yy4xo 8 месяцев назад

ok so i’m trying to wire this retractable license plate holder to my car and it’s got one of those standard 12v plug and my question is if i wire it straight to the battery cause my battery is in the trunk when i cut the car off will it automatically cut off or will i have to cut the switch off while the car is off the only reason i ask this is because the kit came with a key that you can use when the car is off

@PhillipsVision 8 месяцев назад

If it’s wired directly to the battery without a toggle switch, it will constantly be getting power. You need to run it through an in-line fuse (and possibly a relay switch) BEFORE it hits the toggle switch. You need to be able to cut off the power when not in use.

@papergatorzfedducca7998 2 года назад

Thank you new subscriber 🔥🔥🔥🔥

@PhillipsVision 2 года назад

Thanks 👍

@xadam2dudex 2 года назад

So the ground goes from the device ( fans ) to a ground on the car ( engine or body panel or battery ) ? The power come off the battery to the switch ( off terminal ) then from the on terminal of the switch thru a fuse to the device ?

@PhillipsVision 2 года назад

Yes, but it’s preferred to ground it to the chassis if possible

@thecraftycorner4002 4 года назад

Could you.wore a toggle switch dome light this way using a 10 amp fuse?

@PhillipsVision 4 года назад

Mitchell Loven yes, just make sure the fuse is in place before the switch.

@joshuathewelder24 3 года назад

I’m getting to wire a toggle switch for headlights on my lawn tractor. Thank you for the info brother😁

@PhillipsVision 3 года назад

Thanks for the comment, glad it helped👍

@goblin1756 5 месяцев назад

THANKS ANDYYYYYYYYYYY

@homeschoolingandawareness 8 месяцев назад

Thank you.

@aaronhjelmstrom9727 3 года назад

My fans run through a relay. I need to run the wire from the relay that is going to constant power currently to my on position and the power source to the off position? Right?

@PhillipsVision 3 года назад

That is correct. When you switch it “on”, the circuit will be complete and the 12v power will flow to the fans.

@marcwetherbee6423 3 года назад

Andy, I want to hardwire in the FOVAL 150 watt inverter to a lighter socket in my 4runner then add a switch to turn it off so there's no battery drain. Is this wiring video good for that?

@PhillipsVision 3 года назад

Marc Wetherbee should be fine just make sure you use the correct fuse and wire gauge for the draw

@davidjessee7701 3 года назад

@@PhillipsVision do not wire inverter like this... Should run a relay....

@danielkennedy1524 Год назад

Any suggestions on making lighter attachment in console of a mazda 3 not hot with out ignition?

@PhillipsVision Год назад

Are you talking a power outlet or an actual lighter input?

@danielkennedy1524 Год назад

@@PhillipsVision Thanks! The power output in center consoul We hooking up dash cam to that power

@janajones880 2 года назад

Is the black ground wire connected to the black side of the car battery or the red? If the accessory is connected to the black side of the battery, do you have any part of it connected to the red side? I realize I sound ignorant. It's because I am.

@PhillipsVision 2 года назад

Black gets grounded on the chassis. You can attach to the negative (black) terminal on the battery but chassis is better. The red is your 12v power which supplies power to the accessories, running through a fuse prior to the accessories

@351clevelandmodifiedmotor4 3 года назад

4:58 I have a 3 prong switch the one with the metal lever positive and negative ok but what's the third prong for where does that wire to,. Help urgently my life depends on it I need whipers so I can leave where I'm being evicted from it's winter vand a very rainy place

@PhillipsVision 3 года назад

Usually the top and bottom pins are active and the middle neutral.

@camarosunrise5128 5 лет назад

Useful! May need a switch for a horn. 👍

@PhillipsVision 5 лет назад

camaro sunrise Thanks for the feedback; for a horn you may also need a relay if you are bypassing the factory relay

@camarosunrise5128 5 лет назад

@@PhillipsVision o.k...thanks

@Aksinghgzp 3 года назад

@@PhillipsVision pls tell how to wire a separate dashboard switch for extra pair of horns other than stock one.

@PhillipsVision 3 года назад

@@Aksinghgzp are you referring to air horns? If so, you can wire the compressor to the existing horn power that way you can use the existing relay

@jayell8253 3 года назад

Hello. Do you still answer questions for this video? I'm installing a toggle switch to the fuse box, steering column issue, key won't turn (module). The process is the same, is that correct to assume? Thanks for the video.

@PhillipsVision 3 года назад

Yes, I still answer 👍 Are you trying to install a starter switch?

@parmindersidhu9690 4 года назад

Hi jus one question can i use the ground on the battary as i dont want to ground to anywhere on my car u see an one switch is ok for a led light, 4 small led strips an led halo rings with rgb remote right

@PhillipsVision 4 года назад

Vlogstar Parm you can use your Battery ground but it is not recommended. It’s best to ground to your chassis

@parmindersidhu9690 4 года назад

@@PhillipsVision ok so its basically like i can tie the negative wire ro the ground next to my battary which u normally use when jump starting the car do i jus tie it around it as i seen the ground which is next to the battary silver ground

@PhillipsVision 4 года назад

Vlogstar Parm you would use a split wire that allows you to attach a second wire to the negative line.

@MsJohn1972 4 года назад

Hi On a 3 prong switch it would need ground,right?

@PhillipsVision 4 года назад

MsJohn1972 yes, should be voltage, signal and ground.

@frankgonzalez534 2 года назад

I bought a used truck with fog lights but every time I flip the switch it get hot and smells burnt so I quickly turn it off. It has an inline fuse coming from positive terminal at battery. What could be causing it to get hot?

@PhillipsVision 2 года назад

The wire gauge may be too thin. I would use 14 gauge to play it safe

@michaelaverett8642 4 года назад

Man I got so frustrated trying to wire this toggle switch I had to take a break, glad I did cause I found your video and you walked me through it. Thank you

@PhillipsVision 4 года назад

Michael Averett thanks for the feedback, glad it helped👍

@celestewilson9226 Год назад

Your your video is very good but I'm still a little confused because someone came to help me and they cut my wires on my wiring harness so I'm back at square one my wiring harness the lights are the only things together in the wiring harness now I don't know what to do

@celestewilson9226 Год назад

Please help me please help me please help me I'm lost my wiring harness has been cut by someone going to the thing I'm going to use cigarette lighter as the switch with the switch little round switch with two prongs I need help so bad

@cbonesteaksauce3833 3 года назад

Can a switch like this work with current in reverse? I.e. could you connect a solar trickle charger to the switch then to the battery? If so, should I wire the switch with power in (solar panel) on the “off” side?

@PhillipsVision 3 года назад

Just to clarify...you would have the trickle charger normally charging and the switch would cut off the connection? This is a momentary switch so the activation, or deactivation, would only take place as long as the switch is held down. If you want it to be able to switch on/off you’ll need a 12v toggle switch.

@cbonesteaksauce3833 3 года назад

@@PhillipsVision hey! Correct. When the car is off, the trickle charger would send it’s current through the turned on switch to the battery. When the car is turned on, the switch will be off (to prevent power from the battery going to the panel). You’re right, I’d use a toggle switch, not a momentary switch.

@PhillipsVision 3 года назад

@@cbonesteaksauce3833 that should work

@mariazaragoza8686 3 года назад

I’m sorry I’m lost I have a factory stereo and it’s connected to my amp but my amp stays on even when I turn the car off where can I add the toggle switch and where do I get the power to do that

@PhillipsVision 3 года назад

Did you connect the amp to a constant 12v source? If you run it the through a source that is only activated through the ignition, it will only get power when the ignition switch is activated. You could also add an in-line toggle switch that will only send 12volts when the switch in “on”. Find the dedicated 12v line going to the amp and cut it. Add the toggle there, but make sure to add an in-line fuse prior to the voltage reaching the amp. This will protect the amp in the event of a power surge. The layout should be...12v source, in-line fuse, in-line toggle switch and finally the amp. Make sure you ground the amp on the chassis. Do not connect to an existing device’s ground.

@mariazaragoza8686 3 года назад

I forgot to mention that I also have a LOC2SL add on amplifier adapter

@bagsthefixer2245 3 года назад

Have a question could you wire car reverse lights to toggle switch ?

@PhillipsVision 3 года назад

You could but you would need to hardwire them to a 12volt source and not through the reverse switch of the shifter.

@lanekiddy8468 3 года назад

So what do you do for the ground four extra lights

@PhillipsVision 3 года назад

Just ground it to the chassis

@hi7535 Год назад

Hi I got a question. I bought a button with 4 wires sticking out the back. Does it HAVE to be two prong? Like what would be the issue if I just use the red and black wire that's already there?

@PhillipsVision Год назад

Is it a 4 pin momentary switch?

@hi7535 Год назад

@@PhillipsVision it says 4 pole on Amazon so yes?

@PhillipsVision Год назад

@@hi7535 might be a multiple position switch. I use just an “On/Off” switch.

@andrewwalsh9849 3 года назад

I've got a work truck with a light wired to a toggle switch that's been fine for years. I let a buddy work on my truck and now the light turns on automatically when the key is turned to the on position. It's still switch operated if the key is turned to off. Any ideas what could have happened?

@PhillipsVision 3 года назад

Sounds like he crossed wires somewhere. I would trace the power and ground wire from the light to see what he did

@andrewwalsh9849 3 года назад

@@PhillipsVision Okay, thanks for the quick response!

@rrrzz8346 4 года назад

That's brilliant, in line fuse, thank you Phillips.

@PhillipsVision 4 года назад

Rrr Zz 👍

@chaomain 3 года назад

Does it matter which side of the toggle switch you connect to the battery and the device?

@PhillipsVision 3 года назад

It shouldn’t if you have just a simple 2 pin switch. When the switch is “Off” the circuit is open, when it is “On” the circuit is closed. All the switch is doing is opening and closing the 12volts to the accessory.

@kiittush 2 года назад

Hello Philip, Big thanks for the upload! Pray guide me, Shouldn't I be worried about the current handling of the toggle switch too?

@PhillipsVision 2 года назад

Make sure you use the correct voltage and a fuse with the correct amps

@kiittush 2 года назад

@@PhillipsVision alright, you mean 12v switch. But I can't use 6A toggle switch with a 10A fuse. Current more than 6A will blow my switch before fuse could do anything. Isn't it ?

@PhillipsVision 2 года назад

@@kiittush that’s correct. Switch and fuse must be for amps if your accessory

@josetadeo8232 3 года назад

I have been grounding to my switch and the wires kept going up into flames THANK YOU

@timbanda7013 Год назад

Just happen to me 😂

@flynfury8363 4 года назад

I think this will work for an exhaust cutout but my only concern is with an on off switch. Either on or off, one of those ways wouldn’t the power always be trying to close or open the device. In this case I don’t want to always have power going to the valve that closes or opens. Wouldn’t that burn up the motor? If so, how would I fix this problem?

@PhillipsVision 4 года назад

fly n fury use a momentary switch, not a toggle. The power will be disengaged unless the button/switch is pressed. When the button/switch is let go, the power will be cut off again.

@flynfury8363 4 года назад

Phillips Vision perfect. I knew there was an easy way. Thanks for the quick reply.

@flynfury8363 4 года назад

Phillips Vision I’ll try to keep this simple as I didn’t think about this earlier but I can’t hold the button in while I’m driving for a period of time. If holding the button in is open on the valve as soon as I let go of the button the valve would shut again or stay in that position? I need the valve to stay in that position and then on my next press of the button close the valve. How do I do that?

@PhillipsVision 4 года назад

fly n fury then just use a toggle switch “on / off”

@flynfury8363 4 года назад

Phillips Vision I thought a toggle switch would always be supplying power. I need the valve to open and stop trying to keep it open. Same thing for close. I don’t want to burn up the motor if it’s always trying to make the valve move in one direction or the other. I hope that makes sense.

@bee-u6905 2 месяца назад

I wish u would show connected the radiator fan also

@jesseportillo324 3 года назад

Very informative...question: I have (4) LED lights and I want the ability to switch them all on at the same time..how do I go about doing so. Or do I need to have a seperate switch for each of them. Or can I group 2 and 2 ....please advise. Thx

@PhillipsVision 3 года назад

You can run them all to one toggle switch but make sure you have an in-line fuse for their amp draw

@jesseportillo324 3 года назад

@@PhillipsVision thanks for the response. How many in line fuse will I need, plus do you know what amperage of fuse I can use. Thx

@PhillipsVision 3 года назад

@@jesseportillo324 you can use one fuse but it must be the amperage that the lights draw. You will need to check the specs on your lights

@jesseportillo324 3 года назад

@@PhillipsVision thanks. Each light set draws 3.5amp...x 4 set of LED lights = 14amp ...so can I use an in line with a 20amp fuse ...also what type of toggle can be use i.e. type of amperage, 3 pronged toggle switch etc..

@PhillipsVision 3 года назад

@@jesseportillo324 if you don’t need to control them individually I would just run all to one switch through one in-line fuse. The 20 amp is fine. Make sure the toggle switch is a 12volt and 20amp rating

@ericnunezx Год назад

Can you just grab whatever black and red wire from under your steering wheel and wire your accessories onto there?

@PhillipsVision Год назад

If the red is an accessory wire, yes. I wouldn’t recommend cutting into a factory wire. Make sure to ground the black.

@ericnunezx Год назад

@@PhillipsVision How do I add an accessory wire though? Sorry if this is a dumb question. I just dont know what wire is for accessories. I have a pretty old car so I don't want to mess anything up.

@AJND20 3 года назад

Sorry just to clear this up, I connect my positive wire from the battery to the off side and then my wire that connects to the device to the on side??? And keep ground completely separate from the switch

@PhillipsVision 3 года назад

How many pins does your switch have?

@AJND20 3 года назад

@@PhillipsVision two like the one in the video And sorry again, how do you know which fuse to use for the safety?

@stephendrahos9000 3 года назад

I have a 2 pin switch. There are no markings on it. How do I ascertain which is the “on “ pin and which is the what is the “off” pin?

@PhillipsVision 3 года назад

@@stephendrahos9000 if it’s a 2-pin switch it one should be open and one closed. You may have to test each pin with the accessory and 12v power to see which works.

@chaosblackstar 2 года назад

how do i find which wires are my fan wires under the dash.when i turn off my mini van the fans dont turn off so i ben unplugging them every time.shop says 200 hundred dollars

@PhillipsVision 2 года назад

If you’ve been unplugging them, then just connect to those wires and run new lines from them to the dash

@chaosblackstar 2 года назад

@@PhillipsVision ok so i have duel fans do they both run all the time or do i need 2 switches

@PhillipsVision 2 года назад

@@chaosblackstar you can choose. I have both fans connected to one switch

@chaosblackstar 2 года назад

@@PhillipsVision ok thanks phillip

@kyree0083 2 месяца назад

What kind of fuse needs to be added when wiring

@PhillipsVision 2 месяца назад

It depends on the accessories

@sergioa9097 3 года назад

Why do people switches melt ? Is it because they didn't add that safety fuse in the 12v wire?

@PhillipsVision 3 года назад

Yes the fuse will help, but most overheating issues are due to wrong wire gauge. The higher the gauge, the thinner which will melt. I recommend no higher than 14gauge to be safe. Ultimately you want to know you amps of the device; that will determine the proper gauge needed.

@mr.4.017 Год назад

Wait were did you connect the ground?

@benmanis8660 Год назад

To battery or to another ground wire or to a bare metal grounding part of car

@garethwatson7999 3 года назад

I was always told to install a switch inline on the ground wire, is this incorrect?

@PhillipsVision 3 года назад

It can be done, but I’ve never done it that way.

@LTSRIDE24 2 года назад

I'm totally confused... Why would they put a GROUND connection on the switch if it's not suggested to use it?

@vanessa_brz 4 года назад

Where did you put the fuse in?

@PhillipsVision 4 года назад

Vanessa Penaloza the fuse needs to be put inline, BEFORE the accessory and switch. You want the fuse to blow prior to the current reaching/damaging the accessory.

@Xplayer77 2 года назад

Great vid , I’m installing rock lights for my truck about 20 lights under it , should I do the same as you did with the fuse or it’s not necessary?

@PhillipsVision 2 года назад

Always use a fuse as a safety valve

@pacman2460 4 года назад

I’m confused so How would I do this for a remote wire that is connect to my amplifier to turn on/off using a toggle switch?

@PhillipsVision 4 года назад

Pac Man is this for a car amp? Are you using it as a boost?

@pacman2460 4 года назад

Phillips Vision yes it’s for my car amp. I wanted to install a toggle switch to turn it on/off whenever I don’t want the subwoofer on. So it has a remote terminal on the amp but I don’t know how i can connect the remote to the toggle switch to make it function. Like how would I connect it all together with the inline fuse? Thanks

@pacman2460 4 года назад

Phillips Vision please any information will help Thanks in advance

@PhillipsVision 4 года назад

Pac Man it should be pretty much the same setup. I’m not a car stereo guy but would think it’s the same. The toggle is basically connecting/disconnecting the power from the device, in your case the amp. You should have 12v going to the amp, running through a fuse and the toggle. Next, ground your amp on the chassis.

@pacman2460 4 года назад

Phillips Vision so on a two prong switch, I connect one wire which is the power(the remote wire) and the other wire is the ground?

@slurpeeslurpee69 3 года назад

Umm so I’m doing a 4 switch thing to power light bars. Do I just do this 4 times?

@PhillipsVision 3 года назад

So you’re power (4) separate light bars? Do you want the ability to control them individually?

@slurpeeslurpee69 3 года назад

@@PhillipsVision Yeah that’s kind of what I am aiming for.

@PhillipsVision 3 года назад

@@slurpeeslurpee69 then you will need to connect a switch to each light, using the method in the video

@petittrainguernsey3297 3 года назад

Use relays or you risk setting fire to your car.

@Kushology 5 дней назад

What about a 4 pin fuse?

@markgrundvig3485 3 года назад

Is that a Fiero kit car you are working on?

@PhillipsVision 3 года назад

It’s a factory built replica that was made in FL about 20yrs a go. I’m just restoring it, not full build. The donor car is a Fiero GT

@theresahammons3012 3 года назад

It would be the sam for Ignition switch

@PhillipsVision 3 года назад

Starter switch is different since you’re connecting to the starter. Here’s a video I did on that.., ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ygznWYNoDTk.html

@parmindersidhu9690 4 года назад

i basically didnt do the fuse before i watched this video now my car wires started smoking makes sence lucky cars ok it was for my halo rings so i basically put the wire from the halo ring one to postive an one to negative on the battary an then have another wire from the postive wires going to the switch will two wires going to the switch but add a fuse like u showed right

@PhillipsVision 4 года назад

Vlogstar Parm if they’re smoking you may also have too thin of a gauge of wire. Depending on the amps you’re drawing will determine the gauge you need.

@parmindersidhu9690 4 года назад

@@PhillipsVisionright got it a little im using speaker cable but this i the lights i have i have 12v halo rings a 30cm knight rider led 12v light an 4 led strips lights which i basically connected all together which were all on to one swith if i had fuse this time is it good to add the fuse next to my battary an what amp fuse do i need or do i need to make seprate switch for all the lights i jus wanted them too all come on at once please let us know i saw the way u added the fuse thought at least next time the fuse an blow like u said u can cause a fire other way also its been fine for months it was yesterday this happend is this normal to u like it happend after all this time

@PhillipsVision 4 года назад

Vlogstar Parm led strip lighting is usually about 2 amps. If that is your case then 20 gauge should be sufficient. I personally would go with 18 just to play it safe. Never hurts to go heavier for precaution

@parmindersidhu9690 4 года назад

@@PhillipsVision hi ok whats 20gauge is that the wire as im using speaker wire but high quality init

@PhillipsVision 4 года назад

Vlogstar Parm speaker wire is normally 24 gauge and not well insulated. The higher the gauge the thinner the wire. I wouldn’t recommend it

@gizmojrreyna1155 3 года назад

Think you everyone had told me to just connect one to ground and one to 12v but they was completely wrong think you for doing this video cleared everything up

@PhillipsVision 3 года назад

Glad it helped👍