WLtoys 144001 2S & 3S Speed Runs - Couple New Mods - Stock 550 Brushed

Подписаться 21 тыс.

Просмотров 12 тыс.

50% 1

WLtoys 144001 2S & 3S Speed Runs - Couple New Mods - Stock 550 Brushed, before going brushless!
WLTOYS 144001 1/14 Scale 4WD High Speed 60km Buggy
Get Yours Here 👉 bit.ly/2NY792G
Use this code BGAFF10off for low price of US$73.79
WLTOYS 144001 Buggy 2x battery combo here 👉 bit.ly/2XtvvWv
Use Code BGAFF10off for 10% off 2 battery model
FULL 144001 Spare Parts Page Here 👉 bit.ly/32W124F
Get A Further DISCOUNT by using these Coupon Codes BGAFF10off (10%off) or Toyho (7%off)
Buy the 144001 from Gearbest here 👉 gbe.st/302kjlb
XLF F16 RTR with Two/Three Battery 1/14 2.4G 4WD 60km/h Metal Chassis RC Car 👉 bit.ly/3j9m9Ju
If you liked this RC Video... PLEASE BE SURE TO LIKE & SUBSCRIBE!
It's much appreciated and enables me to make further RC Content for you Guys/Gals on a Weekly Basis
Also Purchasing from the Product Links Above also help Support the Channel!
FOLLOW MY OTHER SOCIAL MEDIA LINKS! 😎👍
You can Now Follow me on Facebook here
/ perthwestozrc
Instagram here www.instagram....
TWITTER / perthwestoz_rc
Tumblr www.tumblr.com...
Check out some of my NEW PWOZRC Channel Merch here at TeeSpring teespring.com/...
If you would like me to review any of your RC products on this channel, contact me here via email 1991v8soarer@gmail.com or message me direct on my PWOZRC Facebook page link above
#WLTOYS144001 #XKs144001 #PerthWestOZRC

Опубликовано:

21 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 106

@PERTHWESTOZRC 4 года назад

WLTOYS 144001 1/14 Scale 4WD High Speed 60km Buggy Get Yours Here 👉 bit.ly/2NY792G Use this code BGAFF10off for discount of 10% WLTOYS 144001 Buggy 2x battery combo here 👉 bit.ly/2XtvvWv Use Code BGAFF10off for 10% off 2 battery model FULL 144001 Spare Parts Page Here 👉 bit.ly/32W124F Get A Further DISCOUNT by using these Coupon Codes BGAFF10off (10%off) or Toyho (7%off) XLF F16 RTR with Two/Three Battery 1/14 2.4G 4WD 60km/h Metal Chassis RC Car 👉 bit.ly/3j9m9Ju

@romisilvente1670 Год назад

Good video! Very fast at 3S, but is dangerous for the esc. The BEST cheap RC car by the price.

@robsrcinsanity1220 4 года назад

Brushless will give you back way more than you lost with the wheel diameter. I think you’ll really like it after your upgrade. Great video 👍🏻🍻

@PERTHWESTOZRC 4 года назад

Yeah for sure, was just fun to test the results now from my speed runs on the stock setup late last year for comparison, cheers Robert 👍🍻

@hxshir_m3436 3 года назад

really cool but where did u get the wing for the front splitter is it the xinlehong 36-sj03 wing? pls answer fast

@PERTHWESTOZRC 3 года назад

Its from another rc truck I had that was for parts, thanks for watching 👍

@MattsHobbyWorkshop 4 года назад

Great video, dude! I just bought one about an hour ago! Can't wait to get it and start moding it and shooting some footage for my channel. Keep up the good work, m8!

@PERTHWESTOZRC 4 года назад

Awesome bro, you're gonna love this buggy...its awesome! Cheers for tuning in man, appreciate it, have a good weekend 👍🍻

@jonoedwards4195 4 года назад

Great work, I took Mine down the beach for a Daytona session, twas awesome on the stock tyres. Looking forward to more shows Westy, unreal thanks.

@PERTHWESTOZRC 4 года назад

Cheers brother, thanks for watching 🍻👍😎

@mohammadhafiy8637 4 года назад

Hello sir. May I know, where you buy the foam tyre and front splinter?? And how you make the car lowered? Did you change absorber? Please make one video whatever you change or modified on that rc car. So that I can refer on ur video and always following and support your channel. Thanyou. -Malaysia

@PERTHWESTOZRC 4 года назад

Hello Mohammad, thanks for watching, the foam tyres I bought from eBay at the start of this year, and the front splitter is just a rear wing from another rc car that I parted out. As for lowering the car its very easy.. No purchase needed... You just install 4 screws on each lower control arm. I will make a quick video on it soon and share on my chanbel OK 👍

@Mainiac1000 3 года назад

This front bumper / Spoiler looks so cool. Which car is it from? What is the diameter of the foam tires? Many thanks for your answer.

@tsi_yoav2363 Год назад

I don't get it, 3s on stock engine isn't safe or something.. right? Does the stock tires slower than the other tires (that you showed)? And what did you change for it to get to 70??

@antixfpv6653 4 года назад

Just ordered one. Looks like great fun 🤩....going to try an FPV camera on it. Any suggestions / checks I should do when I receive it ? Thanks

@PERTHWESTOZRC 4 года назад

Hello and thanks for watching, just check all the screws and wheel nuts are fairly tight before taking it out, the early models suffered at time from wheels falling off but that was due to shorter axle threads which have been rectified in newer releases like what you will have soon. mine was the early version so i dabbed a bit of loctite on each wheel nut before that would happen. other suggestions are to listen to the mesh of the gears like the spur pinion and diffs before taking it out. Ive had no issues with my one but some owner have said there can be little grease in the diff itself so just grease accordingly and all is good. for the most part i think that's not a real issue. Run in the motor as you do on all brushed rc cars and have fun! :) These cars are usually trouble free and durable out the box

@antixfpv6653 4 года назад

@@PERTHWESTOZRC thanks so much for your advice 🙂👍🏻

@gdhall5311 4 года назад

You make me want to pull mine out for a run, good job Dave.

@davebatman847 4 года назад

I noticed the front splitter is a spoiler from another car, hower it is installed upside down and backwards, im wondering if that is having an adverse affect on the speed. Air flow getting underneath and pushing the car up instead of planting it to the road? What about trying it the right way up and round so the air is pushed over the nose of the car

@PERTHWESTOZRC 4 года назад

Good eye mate, yep its a spoiler from a truggy I parted out, the brace for the spoiler happened to line up perfectly on the shock tower plate so installed it like that. I may flip it over the right way if the holes line up when its right way up. Cheers for watching Dave 👍🍻

@krisstoney6892 3 года назад

Great video mate could I have the make and model of splitter your using I am from the UK will more likely have to Google it can't find it via link in description

@PERTHWESTOZRC 3 года назад

Hey Kris thanks for watching mate, the splitter is just actually a rear spoiler I stole from one of my rc trucks, the XLF x03 think it was and just flipped it upside down 🤣 the mount happened to line up perfectly with the holes on the shock tower brace 👍

@RCModSquad 4 года назад

Hello David. Good run. I have some of those tires but I haven’t tried them yet. We’ve been on vacation for two weeks but we’re headed home now. Have a great day and be safe out there!

@PERTHWESTOZRC 4 года назад

Hi David a vacation sounds good to me right now lol. But I'm very busy with work atm. Have a great weekend and thanks for tuning in 👍🍻

@romisilvente1670 Год назад

Hello friend, you can to try with a brushed motor 540 12T for more r.p.m and very fast. Thanks

@electroddxful 4 года назад

Great run Dave. Nice fast buggy. 👍👍👍👍👍

@PERTHWESTOZRC 4 года назад

Thanks Ray, its a great RC car

@TonysRcTechboom 4 года назад

Dave I definitely thought the foams tyres would of been faster 🤔 great speed run on 2s and 3s, carnt wait to see whats it like on brushless because ill copy of you lol 🤭 I got mine out for the first time on the beach last week and boy I missed the little fella 😊 great Rcs for the Money, I might even buy another one to convert it to brushless and I can have both types 😀 really enjoyed every minute of this Video as always my Aussie Mate 👍🇦🇺😎🇬🇧👍

@PERTHWESTOZRC 4 года назад

Cheers Tony 👍🍻 love this buggy its awesome and has heaps of potential, cant wait to go brushless on it

@TonysRcTechboom 4 года назад

@@PERTHWESTOZRC 👍😎😍👍

@Das-Veilchen-X 3 года назад

Cool Video 😎 and Merry Christmas and a Happy New Year LG Max

@PERTHWESTOZRC 3 года назад

Cheers mate, same to you, merry Christmas👍

@MrCrazywei 4 года назад

pleas link for the wheel,thx

@BabyAbarth 4 года назад

Good video once again Dave! I myself only managed 64km/h on 3s using 1/16th Remo Hobby tires..

@PERTHWESTOZRC 4 года назад

Thanks Joe, just a fun test before i go brushless very soon! Have a good weekend brother..cheers for watching 👍🍻

@romisilvente1670 Год назад

Nice Run, please can you put the link of front splitter? Thank friend

@PERTHWESTOZRC Год назад

Hi I actually do not have a link because I just used a rear wing off another RC truck and flipped it upside down to make a splitter

@romisilvente1670 Год назад

@@PERTHWESTOZRC Ok, thanks!

@robertthomas6907 4 года назад

It looks good with the tires and spoiler. Would a different size gear help with the loss of speed due to the tires?

@PERTHWESTOZRC 4 года назад

Yeah definitely needs gearing up now, thanks for watching Robert

@Van_City 4 года назад

Good runs Dave. Too bad it was slower but those wheels do look good and seem to perform nicely on the pavement. Cheers Buddy 🍻

@PERTHWESTOZRC 4 года назад

Cheers buddy, yeah the smaller diameter of these slowed the top end a bit but it does run pretty fast still in stock configuration, i like how it handles on foams ...next step brushless 👍🍻

@ruflasto1 4 года назад

Nice Speed Run's my Brother. Hope you are all well. Some good speed's with the stock set up. Need to keep the wheels sizes the same ..lol but still good my Friend..lov it...Thumbs up from me.

@PERTHWESTOZRC 4 года назад

Thanks brother, was a fun test to try out these quick mids and foam tyres before I do the brushless conversion! Have a great weekend my friend 👍🍻

@Deadcookie-qn2pe Год назад

but were did you get the mods from was it like a 3d print or did you buy it

@PERTHWESTOZRC Год назад

I just done the mods with parts i had from other rc cars, the front splitter is just a rear wing spoiler flipped upside down from an rc truck

@krisstoney6892 4 года назад

Hey Perth mate. I got one of these coming and I have foam schumacher racing wheels 1/10 to go on could you tell me im an rc newbie how to lower this one and adjust the toe when new wheels are on. Thanks mate

@PERTHWESTOZRC 4 года назад

Hey Kris, funny you say that I was actually planning to make a quick video tomorrow on this to show you guys, so stay tuned...its really easy mate 👊😎🍻

@PERTHWESTOZRC 3 года назад

That’s the one

@tomw5573 4 года назад

Looking good, keen to see how it goes brushless, I plan on upgrading mine eventually. Great little cars for the price.

@PERTHWESTOZRC 4 года назад

Yeah gotta love the 144001, no wonder its so popular in the rc scene the past year, its such a bargain... I'm waiting on a decent sized servo but I may just use another smaller metal geared servo for now that I have spare from a bundle I bought for some of my other RC's, like the 18 scale buggy I converted recently to brushless and the orange Kmart boat etc.

@tomw5573 4 года назад

@@PERTHWESTOZRC I've seen plenty of people using a jx brand mini servo from bg, I'll be getting that one when I do the upgrade, as the 1/10 size jx servos I have are excellent quality at a very good price.

@parker1ray 3 года назад

Could you provide a link to the foam tires?

@PERTHWESTOZRC 3 года назад

Sorry bud the link on eBay from where I bought em over a year ago has disappeared unfortunately

@jamaldemon2245 3 года назад

Which One good tyre ? Foam tyre or slick tyre ?

@PERTHWESTOZRC 3 года назад

Foam tyre is better for speed runs

@paulgarratt8422 4 года назад

How long do you run it on 3s, does it cook the motor?

@PERTHWESTOZRC 4 года назад

Hi Paul, i only ran it on 3s for quick speed tests like this, otherwise i run 2S in it mate. Cheers for watching👍🍻

@gastrobarhoudtvaneten 4 года назад

Hello there the car looks great. Where can i buy the front bumper?

@PERTHWESTOZRC 4 года назад

I didn’t buy it, it’s just a wing from another rc car that I used , thanks for watching

@irvingdavidsanchezchavez3900 2 года назад

good, where did you get the front splinter?

@PERTHWESTOZRC 2 года назад

I made it from another rc rear spoiler

@Rui-cv9gf 4 года назад

Nice video. The 3s don't damage the esc? 😉 How many minutes you can run 3s? 😉 Thanks

@PERTHWESTOZRC 4 года назад

Haven’t had any issues with 3s just yet but I’ve only used it for speed runs, I recommend 2s for long time use

@Rui-cv9gf 4 года назад

@@PERTHWESTOZRC thanks 😉

@DvdNnoitra 3 года назад

I can put a 3s battery without causing electronic damage? I have that doubt. Thanks!

@PERTHWESTOZRC 3 года назад

My 144001 was the early version 1 model when first released and the ESC can handle it, the newer ones that are made blow up instantly, go watch my 124019 video on how not to use 3s lipo on the new stock brushed esc

@DvdNnoitra 3 года назад

@@PERTHWESTOZRC thanks!! and can you recommend a 2s lipo battery for stock 550? and maybe in a while I will change for brushless, which 3s battery do you recommend? Sorry, I'm very noob to this battery thing

@islandrc-duke1972 4 года назад

Nice runs on 2 and 3s

@PERTHWESTOZRC 4 года назад

Cheers Duke mate 👍🍻

@EpicFilmshub 4 года назад

That is clever and amazing mate..!

@PERTHWESTOZRC 4 года назад

Thanks for watching have a good weekend! 👍

@suzukisatria3425 3 года назад

Does it run on battery for 3s, will it peel off or damage the circuit?

@PERTHWESTOZRC 3 года назад

Yes as you can see it runs on 3s, thanks for watching

@suzukisatria3425 3 года назад

I'm a person who doesn't understand English very well, so if you can run it for 3 seconds, can you press OK if it doesn't work, can you be full?

@BIGDRONEFLYER77RC 4 года назад

I did that with my gps speed meter, I had to look at it again. My buggy is getting super hot after my last stock run.

@PERTHWESTOZRC 4 года назад

Yeah I didnt realise at first that it was set to AVG speed when u turned the unit on 😁 cheers for watching Donnie👍

@jonoedwards4195 4 года назад

All the super powered WPL models start cookin early, an the safety cutout works on making a good session suc, My only gripe, otherwise They are bargains.

@mindbodyandsoul81 3 года назад

would that front bumper fit the 124019

@PERTHWESTOZRC 3 года назад

Yes

@w8nc82 3 года назад

Bigger wheels should get more top end & slower acceleration just like a car I'm guessing. Stock lipo got some herbs

@JesseBMotors 4 года назад

Good testing 👍🏁

@PERTHWESTOZRC 4 года назад

Cheers bud, appreciate you stopping by Jesse 👍🍻

@jjp735i9 4 года назад

Nice runs. Loving mine on 3s stock brushed. See no need to update to brushless if you just going to bash it like I do. :)

@PERTHWESTOZRC 4 года назад

Cheers for watching James 👍

@sim6057138 3 года назад

What RC car is that front Wing from

@PERTHWESTOZRC 3 года назад

Its off a xlf truggy from memory

@stephenksiazek812 4 года назад

Sorry if my question is stupid, which would last longer ....foam or rubber tires on that road surface? 😕 Ps...Your vehicle mods and videos are great!

@PERTHWESTOZRC 4 года назад

Hi Stephen I haven't ran foam tyres before until now so as far as durability long term I'm yet to find out, I do think rubber tyres would probably last longer than foam though

@stephenksiazek812 4 года назад

@@PERTHWESTOZRC Thank you Perth for the reply! ☺

@ShenRC 4 года назад

O that's crap! LOL!! it's still pretty fast. looks like 1:1 cars been doing some speed runs on that road also!

@PERTHWESTOZRC 4 года назад

Haha yeah i was like WTF!? then realised i must have been looking at the average speed not Max 😆

@mindbodyandsoul81 3 года назад

where can buy front bumper?

@PERTHWESTOZRC 3 года назад

I told you earlier I have no link

@tomw5573 4 года назад

Interested to see the differences with the xlf

@PERTHWESTOZRC 4 года назад

Yeah me too, I thought I'd have it by now but the dates have been pushed back on that new model like 3 times already this month lol.

@tomw5573 4 года назад

@@PERTHWESTOZRC recently did my first preorder through Banggood, ordered a WPL D-12 Kei truck, looks like a Suzuki Carry, that's been pushed back once so far, hopefully doesn't take too long 🤣