No video :(

Woodcraft Clip-ons - Yamaha MT-09 FZ-09

Подписаться 7 тыс.

Просмотров 55 тыс.

50% 1

Installation demonstration* of Woodcraft Clip-ons on a 2019 Yamaha MT-09/FZ-09. Discount code and tools used listed below...
Visit www.woodcraft-...
For a discount on your Woodcraft purchase by using discount code: MotoSouth on any orders over $50!!
Links of the products used see below...
Rubber Ducky for your bars - amzn.to/31ytlWb
Grip glue - amzn.to/2GuNrbs
Tools and products every motorcyclist should have...
Maxima waterproof grease -amzn.to/2Ic8iiO
Honda chain lube/cleaner -amzn.to/2GjzAHK
The best spray polish ever made -amzn.to/2I98TBV
Motion Pro t-handle -amzn.to/2Gx1HCz and amzn.to/2GFtelg
T-handle allen wrenches- amzn.to/35FZBK3
Universal socket swivel- amzn.to/2oyDftv
Always secure bolts on critical controls with thread locking compound... amzn.to/2tST2lM
Best way to mount your phone to your bike...
Ram X-mount - amzn.to/2pQA2BZ
Handlebar adaptor - amzn.to/2GFlVtJ
Extension - amzn.to/2pPGLfB
Purchasing from the above links pays a small commission to the channel but doesn't cost you any extra! Please help support MotoSouth and check out my other how to videos.
*Installation of critical controls should be performed by a qualified mechanic.

Опубликовано:

14 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 88

@Obee270 2 года назад

It’s not my first time drilling holes in bars but I searched hoping I would find a better way of lining up the holes properly before drilling. The electrical tape trick is cheap and genius. Thanks for sharing!

@nelson5743 4 года назад

Just a tip... A side view of the ergonomics would be nice

@chincemagnet 4 года назад

It’s good to see a tutorial for this Just wish you had directly compared the seating position between them

@MotoSouth 4 года назад

It’s not a big difference unless you install them with the spacers in the lower position. The way we installed these does feel lower but in the pictures we took you almost can’t see the difference

@EtaParseids 4 года назад

First! Also, LOVE your videos. I'm currently saving up to get an MT-09 as my second bike and your guides always keep my hype levels high

@MotoSouth 4 года назад

Thanks for watching!

@VivalaGhost 4 года назад

I'm also saving up for an MT09 as my second bike haha. Next year it'll be mine 😎

@MotoSouth 4 года назад

Great bike! You'll love it

@sonoftheserpent.8704 4 года назад

can these work on mt 03?

@CreepyLemon25 4 года назад

The pro taper fits the mt09 better. But the clip.ons are not bad thou, theyre just not my thing. Kudos to both bikes and u sir, great vid!

@DRock2k6 4 года назад

Blew my mind when you used the air to get the grip off, never would have thought of that. Great video as usual!

@MotoSouth 4 года назад

Takes a little time but it usually works without damaging the grip.

@antonioromero6934 3 года назад

Que mejoras tiene ese tipo de manillar respecto al de serie? No habría que retrasar estriberas ya que baja la postura??

@greenmachine900 4 года назад

Lol I saw the title and had 2 thought. First was no way that's for his bike, right?!? Second was if so I'll take dibs on the protapers lol. Another quality informative video man.

@MotoSouth 4 года назад

Lol, almost had you fooled

@greenmachine900 4 года назад

@@MotoSouth haha, how's your buddy like it so far?

@MotoSouth 4 года назад

@@greenmachine900 he likes it. He may even add the spacers so he can flip the adapter plate and go a little lower.

@TristanMilanG 3 года назад

What size if drillbit you used for the bar end ?

@gnarlykook287 4 года назад

Cool video. Can’t wait to get my MT09!

@MotoSouth 4 года назад

It's a fun bike, you'll love it.

@traskabraska 4 месяца назад

excellent, excellent tutorial! thanks!!

@hiepta2076 3 года назад

Are the new bars threaded for the old bar ends? I know you drilled them out for aftermarket ones but I might want to use stock ones.

@MotoSouth 3 года назад

I used the stock bar ends.

@sensoryamusiaAU 4 года назад

Did you not have any trouble with the throttle cable when turning the bars to the right? I installed these today and the throttle snags.

@MotoSouth 4 года назад

No issues that I remember. You can try rotating the bar up or down slightly to see if either direction gives the cable more slack. You definitely don’t want it to bind

@KotaRidez 5 месяцев назад

Did you have to use a drill press to drill the holes or can you use a regular drill?

@MotoSouth 4 месяца назад

If you’re careful and center punch the holes, a drill should work fine

@DL-sy5fv 2 года назад

What did u use to cover the mirror mounting holes?

@RapidRedRider 2 года назад

He used plastic nails or rivets whatever you want to call them. He cut them a bit shorter. I bought the set of blank screws online to plug my mirror holes but I think his idea looks better

@ronhu6035 4 года назад

Would have been nice if you sad on the bike before and after, but at least after so we can see how your sitting orientation is.

@MotoSouth 4 года назад

The thumbnail is the after position. We did take a before picture as well but it's hard to see a difference. You'll definitely feel it though.

@Echo4Yankee 3 года назад

Every time I see an MT-09 with clips on it just looks goofy af to me.

@Moreymoto 3 года назад

why not just buy a sport bike the whole point of a naked is the seating position

@MotoSouth 3 года назад

I guess there are some who prefer the look of a clip on style bar. In the configuration we set his up, it’s not much lower than stock.

@bigfhands Год назад

i don’t see the point, usually the point of having clipons in stead of a single bar is the fact the you can pivot them independently but this looks like it lock everything into place just like a single bar and i’m shore it pricy and you don’t have the option to rotate the bar towed or away from you like a single bar would.

@James-qq2vq 4 года назад

What size drill bits did you use?

@MotoSouth 4 года назад

I’ll need to size them up when I get a chance. I have a standard bit set and just used the holes in the factory bars to determine the size

@586008 4 года назад

Could you do a demo video of attaching handguards on the MT 09?

@MotoSouth 4 года назад

I would consider it. What brands are you thinking of?

@CreepyLemon25 4 года назад

I have the same request as well. Pls pls! Will be waiting for it 😁

@CreepyLemon25 4 года назад

@@MotoSouth please 😊

@586008 4 года назад

@@MotoSouth Barkbusters are probably the most common ones, the strongest ones too.

@visualatoz 2 года назад

Hi I need help if you can I have Suzuki 2020 GSXS 750 I’m looking for clip ons What do you recommend

@nicosasuman674 4 года назад

Hey there, was wondering how you installed your bar ends? Got some exactly like yours and cant seem to figure them out 😵

@MotoSouth 4 года назад

Need to do a little grinding to allow them to fit.

@nicosasuman674 4 года назад

MotoSouth im gonna try putting a stopper between the bar end and the bar itself maybe that’ll work

@tantojutsuninpo 3 года назад

Awesome video, any long term opinions? I want a more tucked Highway riding position without being in a “push-up” position. Currently have the Protaper steering damper low bars. They are lower but wide AF

@MotoSouth 3 года назад

I have the ProTapers on my bike as well. This install was done on a friend’s bike so I can’t comment on the position long term but I can tell you that in the position we installed his it doesn’t feel much different than my ProTapers.

@mt15lovermodification55 2 года назад

Woodcraft fit on mt 15

@roberthealy1814 4 года назад

Where is your shop located? You do excellent work.

@marcinp8132 4 года назад

Hi cool video as always, QUESTION, link to sticker on your front fender please.

@MotoSouth 4 года назад

www.hypernakedbrand.com

@waterborne4072 3 года назад

Did you get the XL bars?

@Johalmoto 3 года назад

What phone mount you use with these ?

@FRob911 4 года назад

whats the position difference between clip ons and the protaper? Considering one of those...thanks

@MotoSouth 4 года назад

Without adding the spacers and flipping the adapter plate to get the Woodcrafts lower, they are pretty close as far as height. The Woodcrafts are a little more forward though.

@Champion2Manager 3 года назад

Hey would you say it’s safe to add a damper stabilizer after installing the woodcraft bars on the FZ09/MT09?

@MotoSouth 3 года назад

Probably best to contact Woodcraft about that, but I have seen it done so I know it’s an option

@Champion2Manager 3 года назад

@@MotoSouth sure I will ! Thanks :) very good video !

@jdmstreetmonstavanquishcli5983 2 года назад

I know I may be late to this video but.. does anyone know if you can run a stabilizer with this set up?

@MotoSouth 2 года назад

May need to check with Woodcraft on that one. I would think you could but I’m not sure.

@jdmstreetmonstavanquishcli5983 2 года назад

@@MotoSouth thank you bud I’ll fact checking it and look around🤝

@maverick1169 4 года назад

What mirror mount are those? Can’t seem to find one that fits the woodcraft.

@MotoSouth 4 года назад

They are the ones that came with the MZS mirrors. You will need to enlarge the opening for them to fit. amzn.to/2JAz5JU

@cutesailor007 4 года назад

which one is better clip on or stock

@MotoSouth 4 года назад

Whichever ones work best for you. I like being a little more upright so bars work best for me but if I were doing track days I’d probably go with the clip-ons.

@RahulProduction 3 года назад

Is it compatible with mt15 also

@MotoSouth 3 года назад

You would have to contact Woodcraft about that. My guess would be no.

@SmokysRides 3 года назад

You are near Lafayette? Do you have a shop?

@MotoSouth 3 года назад

I’m a couple of hours from there. I just work on my bikes in my garage

@sonoftheserpent.8704 4 года назад

can these clip ons work on mt 03? Im not sure..

@MotoSouth 4 года назад

Doesn’t look like they are available for that model as of now.

@santiagocordero2378 4 года назад

Can you install those clip ons to a mt07?

@MotoSouth 4 года назад

They do make them for the MT07 as well 👍

@MrApmech 3 года назад

Another option to drilling holes in the bars is to just grind the pins down on the controls.

@uallacecarlos3933 4 года назад

Congratulations very cool. Give a tip on how to remove the safety sticker from the motorcycle tank.

@MotoSouth 4 года назад

Hair dryer to heat it up and then peel it off slowly

@Roy_Godiksen 4 года назад

This thing i don't get is: Why someone would buy an MT-09 if they want a sportier riding position. A Street Trippel 765R/765RS will be a better overall bike for almost the same price as all the MT-09 + all the mods...

@MotoSouth 4 года назад

It's a better riding position for track days. Plus it's cheaper to replace one side if you have a track incident and don't damage both. I have the ProTapers on my bike which suit me but some just like the MT with an even lower bar.

@Roy_Godiksen 4 года назад

@@MotoSouth Fair enough.

@stevebenson8960 4 года назад

Roy if you don't like the MT-09 don't watch the video or compare it to a stripple. I had a Stripple 765R and was not enjoyable (boring like ketchup) but this is my opinion and you don't have to like it. Just like I think your opinion is stupid find something else to do

@travisshrey6720 4 года назад

From my point of view I want to be farther forward with the bars just to load my wrists a little more. When highway riding the stock seating position lets your chest act like a sail, I'm using my stomach, hip flexors and grip to stay on the bike. A more forward lean would make it a more neutral ride.

@AyushSingh-qn6tz 4 года назад

Maybe for the love of yamaha and that super good street naked look

@mariotarantino8877 3 года назад

o cosa metti o bischero

@James-qq2vq 4 года назад

yeah I ordered this kit with a 10 mm spacers and they couldn't even send me bolts that were long enough absolutely fucking unprofessional....

@UnburdenedByWhatHasBeen 2 года назад

why🤦🏽‍♂️?? trade that thing in for a R6 or gsxr750. this is like wearing socks with sandals 😂

@user-fe5bi7ul4t 2 года назад

Nah 600cc feels like a moped at low speeds. Could never own one unless I go to the track often. But ima have this MT09 SP til hi hits 30k miles. Shred through a rear tire every 4 days riding or so.

@UnburdenedByWhatHasBeen 2 года назад

@@user-fe5bi7ul4t mt09 is definitely better for the streets. I own a mt10 and a 2018 rsv4. The rsv4 only gets use when im specifically going out to hit the back roads or im trailering it to the track for the weekend. Most 600cc aren't great for everyday riding but to me its more the seating position that kills it. My old daytona 675r had plenty of torque for the streets. The 636 and the M/V f3 also has grunt in the lower revs. Leaning over riding around town is what kills those bikes plus tall gearing which can be fixed. This is why naked bikes have became more popular over the past 10 to 15 yrs.