Тёмный
No video :(

WoodTrick Galaxy Marble Run 6 - The Big Wheel 

Leo Kessels
Подписаться 1,6 тыс.
Просмотров 16 тыс.
50% 1

The final construction video. The big wheel is being built. It is important to sand and wax where necessary. There is a lot of movement. Please stay tuned until the last moment: on my model the marbles had a tendency to leave the track in a few places. I had to make some modifications to prevent that. I will also then show where I improved the stability of the track afterwards with wood glue.
I thank you for your interest. I hope I have been helpful to you with my videos.
There will be one more video in which I show you the complete functioning of the layout: "the journey of the marbles".
De laatste bouwvideo. Het grote rad wordt gebouwd. Het is belangrijk om daar waar nodig goed te schuren en met was in te smeren. Er beweegt namelijk erg veel. Blijft u vooral kijken tot het laatste moment: bij mijn baan hadden de knikkers de neiging om op enkele plaatsen de baan te verlaten. ik heb daarom enkele modificaties moeten aanbrengen om dat te voorkomen. Ook laat ik dan zien waar ik achteraf met houtlijm de stabiliteit van de baan verbeterd heb.
Ik dank jullie voor de aandacht. Ik hoop dat ik jullie met mijn video’s behulpzaam ben geweest.
Oh ja… er komt nog één video waarin ik jullie de complete werking van de baan laat zien: “de reis van de knikkers”.
Das letzte Bauvideo. Das Riesenrad wird gerade gebaut. Es ist wichtig, dass Sie bei Bedarf schleifen und wachsen. Denn es gibt eine Menge Bewegung. Bleiben Sie bis zum letzten Moment wachsam: Auf meiner Anlage hatten die Murmeln an einigen Stellen die Tendenz, das Geleis zu verlassen. Ich musste einige Änderungen vornehmen, um das zu verhindern. Ich werde Ihnen auch zeigen, wo ich die Stabilität des Aufbaus mit Holzleim nachträglich verbessert habe.
Ich danke Ihnen für Ihre Aufmerksamkeit. Ich hoffe, dass ich Ihnen mit meinen Videos behilflich sein konnte.
Es wird noch ein weiteres Video geben, in dem ich Ihnen den kompletten Betrieb der Anlage zeige: "Die Reise der Murmeln".

Опубликовано:

 

22 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 16   
@Ddronron1
@Ddronron1 Год назад
Excellent camera work. Great tips and tricks. I find that using Chapstick as a lubricant also helps when putting tight pieces together. I learned that from U-Gears which makes great model kits.
@leokessels88
@leokessels88 Год назад
👍I still use the chapsticks only for my lips 😊. But indeed, you could also use it as a lubricant for such things. However, I think it is more expensive than a piece of wax
@FDGO
@FDGO 11 месяцев назад
Meiner läuft einwandfrei ohne rumfliegende Murmeln. Habe das oberste Kurvenboard nach den Wipprampen leicht angeschrägt, so dass die Kugel nicht liegen bleibt und das letzte Gummiband abgemacht. Dadurch ändert sich fast nichts in der Optik aber die Bahn läuft einwandfrei. Bei den Kurven mit den 289-29X-Teilen etc habe ich keine Probleme entdeckt. Nette Bahn auf jeden Fall.
@leokessels88
@leokessels88 11 месяцев назад
Meine Erfahrungen haben gezeigt, dass die Gummibänder irgendwann von selbst abfallen. Aber so hat jeder seine eigenen Lösungen.
@models-by-fadda59
@models-by-fadda59 2 года назад
Was für ein Monstrum. 😯 Hoffentlich funktioniert alles nach den Ergänzungen.
@leokessels88
@leokessels88 2 года назад
Es ist in der Tat ein großer Junge. Und schau dir mein letztes Video an. Während der Aufnahme flog keine einzige Murmel aus der Bahn. Und ich habe bei der Videobearbeitung nicht geschummelt 😊.
@models-by-fadda59
@models-by-fadda59 2 года назад
@@leokessels88 Natürlich schaue ich mit das Video an.👍
@leokessels88
@leokessels88 2 года назад
@@models-by-fadda59 👍😊
@TinkeringJohn
@TinkeringJohn 2 года назад
At 10:27, I see you added curved pieces on the rail to keep the ball from leaving the track at the bottom of the 3 diving board type pieces. I see several people had removed the rubber band, so the bottom board stay in the down position. Even in the Wood Trick video you can see they did that too.
@leokessels88
@leokessels88 2 года назад
I had also considered leaving out the rubber bands at "diving boards". But after my adjustments, the marbles did not leave the track. And all the rubber bands are still attached to the diving boards. So everyone has their own solutions.
@jimswist
@jimswist 7 месяцев назад
So. Is this or the ROKR marble night easier? What has better quality?
@leokessels88
@leokessels88 7 месяцев назад
The quality of both marble tracks is equally good. But the Night City was easier to build. The Galaxy Marble Run is much bigger and more challenging.
@jimswist
@jimswist 7 месяцев назад
Thanks. I'm amazed at the precision cutting of the ROKR product, as well as the instructions.
@alain4139
@alain4139 2 года назад
thks again for this vidéo , il you want to try an outstanding paper model , try the cubic fun brand ,Notre dame de Paris , the big one , 293 piece. All piece are precut etc etc .Reference ‎MC260h
@leokessels88
@leokessels88 2 года назад
Thanks for the tip. Indeed a nice model. I'll think about it.
@leokessels88
@leokessels88 Год назад
I bought Cubicfun's "Notre Dame de Paris" and will build it soon. And that build will of course also be featured on my channel.
Далее
WoodTrick Galaxy Marble Run  2 - the drive train
13:11
10 CRAZY Clocks You Won't Believe EXIST!
5:15
Просмотров 600 тыс.
Simple Flower Syrup @SpicyMoustache
00:32
Просмотров 1,1 млн
Ed's Choice rolling ball sculpture
4:08
Просмотров 1,3 млн
Making a LEGO Car Cross Broken Bridges...
9:26
Просмотров 4,3 млн
Marble Run Spiral Hoist Murmelbahn
3:32
Просмотров 1,4 тыс.
WoodTrick Galaxy Marble Run  1 - the sphere
13:09
Просмотров 13 тыс.
1930s Wood Pinball Restoration
27:19
Просмотров 8 млн
GraviTrax Jumper Fun
5:12
Просмотров 63 тыс.
BIG MOTORIZED MARBLE RUN MACHINE
11:06
Просмотров 1,2 млн