Тёмный

Woodturning that sells simple grain matched box in 6 easy steps. beginners wood turning 

Black Label woodworks
Подписаться 5 тыс.
Просмотров 184 тыс.
50% 1

Wood turning boxes is a fun project that is a great seller at craft and art shows. These boxes look great on a shelf but also are functional. In this video you will learn how i make a grain matched end grain box with these simple 6 steps.
www.blacklabelwoodworks.com/w...
Visit blacklabelwoodworks.com to see more of what I make.
I do interactive remote demos through Zoom for clubs and to the public. Visit my website to for more details and a schedule of upcoming pay per seat public demos.
www.blacklabelwoodworks.com/i...
There are risks involved with woodturning. My videos are only for entertainment purposes. If your not familiar with the turning techniques I use consult with an experienced instructor or mentor. Always use appropriate eye, face, and lung protection while woodturning.
As an Amazon Associate I earn from qualifying purchases.
Some of the tools I use in my shop.
Grizzly G0766 lathe amzn.to/3kiHBhX
Hurricane turning tools bowl gouges amzn.to/3CY32Mp
Hurricane turning tools skews amzn.to/2YrfkxQ
Nova Supernova 2 chuck amzn.to/3kmeoT8
Grizzly 17” bandsaw amzn.to/3qh1ee4
Wen slow speed grinder 8” amzn.to/3D0YfK6Turning birds mouth bowls is a great way to use all those small pieces of logs and branches. They are great practice without using expensive pieces of wood. You can literally go into your backyard and grab any decent size branch to use.

Опубликовано:

 

3 фев 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 81   
@Mark_L
@Mark_L 3 месяца назад
Ok, that’s the way to start a video. No music, no stupid introductions, just get right into the reason why I clicked on your channel.
@BlackLabelwoodworks
@BlackLabelwoodworks 3 месяца назад
Thank you for watching.
@brennik05
@brennik05 2 месяца назад
I agree. I subscribed at the beginning of the video because of that format.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 месяца назад
Thank you.
@dougdinan882
@dougdinan882 3 месяца назад
Like that you explain what you're doing.and no annoying music
@BlackLabelwoodworks
@BlackLabelwoodworks 3 месяца назад
thanks for watching
@paintilludrop
@paintilludrop 3 месяца назад
Agree! I love to watch many video's, and they lose me when music is annoying.
@lauradowning691
@lauradowning691 Месяц назад
I love the lack of music and straight forward instructions, very informative. Thanks you!
@anthonym.pacelli1960
@anthonym.pacelli1960 Месяц назад
Excellent video, to the point, down to work from the start, no unnecessary fillers and I actually learned something. Thanks for posting !👍👏
@BlackLabelwoodworks
@BlackLabelwoodworks Месяц назад
Glad you enjoyed it!
@rockybosarge
@rockybosarge 3 месяца назад
I just bought a Record Power Herald Lathe and just starting to turn wood. Thank you for sharing your talent with newbies like me.
@BlackLabelwoodworks
@BlackLabelwoodworks 3 месяца назад
Your welcome thanks for taking the time to watch.
@jimmit77
@jimmit77 24 дня назад
This is a great method which I hope to attempt soon. I think thought, I'll keep my tool edge much further away from the chuck jaws in rotation.
@glencrandall7051
@glencrandall7051 3 месяца назад
Very nice little box. Very pretty wood. Well presented. Thank you for sharing. Have a great day and stay safe.🙂🙂
@BlackLabelwoodworks
@BlackLabelwoodworks 3 месяца назад
Thanks, you too!
@ronaldcumpsty5605
@ronaldcumpsty5605 2 месяца назад
I like to splt the top and bottom as you do. Then I turn the bottom , holding it on the bottom 1/2". Sand and finish in and out and friction polish it. Then I do the inside of the lid and friction fit the bottom to it and finish the bottom of the box. Then I return the lid to a sacrificial piece in the chuck and complete the grip knob, friction polishing this too.
@glennclarke9787
@glennclarke9787 2 месяца назад
Nice video. You say exactly what you doing. I will be watching more of your work 😊
@BlackLabelwoodworks
@BlackLabelwoodworks 2 месяца назад
Awesome, thank you!
@dawnbigwarfe6871
@dawnbigwarfe6871 Месяц назад
Thanks for the step by step video. Really helped this newbie who just tried woodturning something like this yesterday and was frustrated to no end
@BlackLabelwoodworks
@BlackLabelwoodworks Месяц назад
Glad it helped!
@cdrive5757
@cdrive5757 Месяц назад
Why didn't you (Jam Chuck) finish the bottom of the box? Wakodahatchee Chris
@thedevilinthecircuit1414
@thedevilinthecircuit1414 28 дней назад
Probably done off camera; he demonstrates how to apply the finish, so off you go 😀
@clydeschuyler
@clydeschuyler 3 месяца назад
Beautiful piece.
@BlackLabelwoodworks
@BlackLabelwoodworks 3 месяца назад
Thank you! Cheers!
@paintilludrop
@paintilludrop 3 месяца назад
2/2024 .5 ❤..love no music, your skill is enough
@BlackLabelwoodworks
@BlackLabelwoodworks 2 месяца назад
Thanks for watching.
@paintilludrop
@paintilludrop 25 дней назад
Watching again today! Made my first one..turned out ok.
@jeffreyberndtson1456
@jeffreyberndtson1456 3 месяца назад
Nice project
@BlackLabelwoodworks
@BlackLabelwoodworks 3 месяца назад
Thank you! Cheers!
@lenshandcraftedwoodsigns6033
@lenshandcraftedwoodsigns6033 3 месяца назад
Looks great, I love making these.
@BlackLabelwoodworks
@BlackLabelwoodworks 3 месяца назад
Thank you! Cheers!
@DougMilleratWoodSpunRound
@DougMilleratWoodSpunRound 3 месяца назад
Very nice!
@BlackLabelwoodworks
@BlackLabelwoodworks 3 месяца назад
Thank you! Cheers!
@gitaseldiy9525
@gitaseldiy9525 3 месяца назад
Good joob guys
@BlackLabelwoodworks
@BlackLabelwoodworks 2 месяца назад
Thank you
@montebailey4364
@montebailey4364 2 месяца назад
Ditto, "Ok, that's the way to start........
@mistergamerguy
@mistergamerguy Месяц назад
I love watching woodworking videos, these lathe vids are mesmerizing at times. A curious question I had though is, wouldn't it be better on the tools for the lathe if you had cut down the "square" shape of it first using a saw or is it just the satisfaction of beginning to end on the lathe? No hate I promise, just a curiosity.
@thedevilinthecircuit1414
@thedevilinthecircuit1414 28 дней назад
On small-diameter items like these, reducing a square to a 'rounder' shape is actually easier on the lathe. For larger pieces (6"-8" and up), it's less...adventurous...if you knock it down to an octagon or round shape before you start turning.
@bobevans9955
@bobevans9955 Месяц назад
Kind of sound like Ray from everybody loves Raymond
@Chuck_Burke
@Chuck_Burke 19 дней назад
Nice video...thank you for your time in making it...and I agree about the intro :) On another note, after your applied your finish and parted the box off the lathe, how did you remove the nub on the bottom?
@BlackLabelwoodworks
@BlackLabelwoodworks 18 дней назад
Thanks for watching. I used a rotary tool and a 2 inch sanding disc. If you wanted you could make a jamb chuck to fit the opening and do it that way. I just find it easier with the rotary tool for small turnings.
@chipsteinberg5046
@chipsteinberg5046 27 дней назад
Great video, no frills just straight up good work. Nice piece. Is it spalted maple or birch or…?
@BlackLabelwoodworks
@BlackLabelwoodworks 26 дней назад
It's spalted maple thanks for watching
@user-bc6es1hj5t
@user-bc6es1hj5t 3 месяца назад
Why not turn off the scratch/cut what was still on the finished box?
@BlairAshworth
@BlairAshworth 3 месяца назад
Great job. I looked for the link to the walnut oil/wax and sanding paste but couldn’t find it. Can you share what you used? Thanks.
@BlackLabelwoodworks
@BlackLabelwoodworks 3 месяца назад
Thank you. Here is the link to my finishes. www.blacklabelwoodworks.com/wax-and-sanding-pastes/ I currently only have the wax listed i need to make more of the sanding paste.
@garyjohnson9297
@garyjohnson9297 2 месяца назад
Nice covered box Might want to sharpen your forstner bit and round over the bottom Moumt the bottom om a jamb chuck and turn in a foot and dome the bottom
@Lmon1979
@Lmon1979 2 месяца назад
What does a jar like that sell for
@BlackLabelwoodworks
@BlackLabelwoodworks 2 месяца назад
$15 to $25 for something small like this one.
@indianatone218
@indianatone218 Месяц назад
Nice job thanks for showing us this project . Ive liked and subd you ,Greetings from Wales UK
@DennisDolan-fl3mw
@DennisDolan-fl3mw 9 дней назад
where's the link to the sanding paste?
@chuckandjanegoodguys2451
@chuckandjanegoodguys2451 3 месяца назад
Did you make the internal tool?
@BlackLabelwoodworks
@BlackLabelwoodworks 3 месяца назад
Its a 3/8 curved boring bar from John Jordan woodturning. It comes unhandled so i turned one for it.
@doncraft1910
@doncraft1910 3 месяца назад
No links.
@doncraft1910
@doncraft1910 3 месяца назад
Nice spalting.
@kenvasko2285
@kenvasko2285 2 месяца назад
What do you charge for a box like this? Nice video.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 месяца назад
Most of these small boxes i get between $30 to $40 they take no more then 1/2 hour to make. Most of the time i am making them from left over bits and pieces.
@kenvasko2285
@kenvasko2285 2 месяца назад
@@BlackLabelwoodworks Priced right for a nice looking box. Nice job
@davidsmart8594
@davidsmart8594 28 дней назад
@@BlackLabelwoodworks ? It’s $15-$25 in a previous response…
@loganreese4704
@loganreese4704 38 минут назад
Isn't it the worst when you bust through a wall
@joepeanut6827
@joepeanut6827 28 дней назад
There is no link to the Sanding paste.
@BlackLabelwoodworks
@BlackLabelwoodworks 18 дней назад
Sorry i sold out and currently in the process of moving to a new shop. Once I replenish my supply i will put the link back up.
@buglady1952
@buglady1952 26 дней назад
What type of wood is that?
@buglady1952
@buglady1952 26 дней назад
It's so beautiful!
@BlackLabelwoodworks
@BlackLabelwoodworks 26 дней назад
It's spalted maple.
@ierbs7087
@ierbs7087 3 месяца назад
Great looking box, but did you not sand it more before finishing. There are still visible rings. Thanks for sharing your techniques, but yo let the piece down by not sanding it with higher grade papers.
@jeanlong4285
@jeanlong4285 2 месяца назад
I like the shape of the little box, but I think you should be sanding and finishing the inside.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 месяца назад
Seems i missed mentioning in the video I spray all the insides of my boxes with sanding sealer.
@thedevilinthecircuit1414
@thedevilinthecircuit1414 28 дней назад
The shape is generally called a 'ginger jar'.
@woodndrum303
@woodndrum303 5 часов назад
Nice enough shape, but could be refined to appeal to the ladies. I’d never suggest that it’s ok to take a tool that close to spinning jaws! When turning spalted pieces it’s essential to use sharp tools, to avoid tearing the very soft parts of the wood. I would also suggest a mask especially for the fine powder you scraped off with the swan neck. Again a sharp insert would cut better and produce a shaving not dust.
@pigeonmanof180
@pigeonmanof180 2 месяца назад
I like your straight forward style of teaching/talking. For me, the noise from the lathe and from tool-on-wood is as loud or louder than your voice. I can barely make out what you’re saying when you talk while working. You can do better, judging from other turners videos. In all other respects very enjoyable and informative and you could be one of my regularly watched content producers. Maybe a little more light directed on the work area?
@BlackLabelwoodworks
@BlackLabelwoodworks 2 месяца назад
Thank you. Sorry about the bad audio i was trying a new mic and didn't realize it was picking up my lathe noise until i was done recording.
@dangrosnick5329
@dangrosnick5329 2 месяца назад
Why did you round your skew ? It also look uneven on the edge.
@BlackLabelwoodworks
@BlackLabelwoodworks 2 месяца назад
The grind on the skew is similar to what Alan Lacer uses it makes it a little easier to control.
@artlee7415
@artlee7415 2 месяца назад
Nice design for a box but i cant see anybody buying it with the condition you left it in. The tool marks, that gash on the side, tearout inside the lid and on the tenon for the lid. Sorry to be be so critical. Other than that you put out a nice video.
@sbeckwith7801
@sbeckwith7801 2 месяца назад
Good work, but I shall not return to a channel that has commercials every 4-1/2 minutes. Tell RU-vid to Back Off.
@paintilludrop
@paintilludrop Месяц назад
3/2024 ..did not see one commercial. Maybe after a certain number views..they stop.
@papaduck459
@papaduck459 Месяц назад
Don't be cheap and get premium RU-vid with no ads, and stop blaming the channels.
@raganca4313
@raganca4313 Месяц назад
Yeah because some blue collar wood worker has the power to tell the multi billion dollar RU-vid platform where and when they are allowed to put commercials
@darrenreid4634
@darrenreid4634 Месяц назад
Obviously you don't have premium. If you don't stop wringing about ads.
@lonniehanson3079
@lonniehanson3079 Месяц назад
Way too much dead time just looking at piece
Далее
beginners woodturning How to turn your first bowl
18:24
Внутренности Rabbit R1 и AI Pin
01:00
Просмотров 507 тыс.
как достать клеща
01:00
Просмотров 814 тыс.
Half of a Great Idea
26:34
Просмотров 194 тыс.
How to hollow endgrain and make awsome box
36:25
Просмотров 25 тыс.
Every beginner needs to hear this
11:10
Просмотров 1,2 млн
Log to Bowl - Woodturning Video
48:46
Просмотров 120 тыс.
Lidded Boxes and a new Hollowing Tool
15:28
Просмотров 44 тыс.
10 Common Wood Turning Mistakes
14:39
Просмотров 786 тыс.
Richard Raffan - your first go on a wood lathe.
19:39
Внутренности Rabbit R1 и AI Pin
01:00
Просмотров 507 тыс.