No video :(

Woodworking Life - New Woodworking Machines Gang Rip Ogam PO-220 & Stenner Resaw VHL 48

Подписаться 45 тыс.

Просмотров 4,3 тыс.

50% 1

Welcome to my woodworking life - 12 years of making sawdust and a few pieces of furniture. We have added 2 new machines to our wood shop / sawmill. The Ogam po-220 Gang Rip and the Stenner VHL 48 resaw.
In this video we are finishing a job of gang ripping and re sawing 20,000 linear feet of kiln dried White Oak for our client.
Tools used:
Ogam PO-220
Stenner VHL 48 resaw
VISMO SHOES
vismocanada.ca...
10% Off Code: canadianwoodworks
Follow me along as I go through my day, operating Canadian Woodworks & Legacy Lumber. Thanks for watching
Canadian Woodworks - Established in 2010 Paul Lemiski has been professionally building furniture since. We offer one of a kind furniture designed to last for generations, teaching work shops and build your own templates & instructions.
Online Store - canadianwoodwor...
Legacy Lumber - Here at Legacy Lumber we produce beautiful furniture grade lumber using our custom built sawmill and industry leading RF Vacuum Kiln technology. Salvaging urban trees then transforming this "wood waste" into high quality wood products is our goal. Legacy Lumber clients feel great knowing they have the highest quality material to begin their own legacy.
Online store - legacylumber.co
COMMENT below (-:
SUBSCRIBE TO OUR CHANNEL
bit.ly/2D5TGBq
Follow along on Instagram - @CanadianWoodworks
www.canadianwoo...
Follow along on Instagram - @LegacyLumber
www.legacylumbe...
Filmed & Edited by
Paul Lemiski

Опубликовано:

21 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@debfromthemill6945 Год назад

Hello Paul I really enjoy watching the White Oak going threw the resaw and watching the rays pop out on the boards coming threw the machine.

@CanadianWoodworks Год назад

Thanks for watching Deb

@Wordsnwood Год назад

Fun to see the process. Those are some big beefy old machines.

@hallowed45 Год назад

so glad your back....missed your videos

@CanadianWoodworks Год назад

Thanks Doug

@welderman1221 Год назад

Adapt, overcome and improvise!!! Good stuff, Paul.

@stevemaurer6348 Год назад

Back, with new old tools 👍

@CanadianWoodworks Год назад

Hell ya!

@dennisbracci9212 Месяц назад

glad to see you back

@CanadianWoodworks Месяц назад

thanks

@VideosByAl Год назад

Back in 1999 we bought the WM Resaw attachment for resawing Southern Yellow Pine. Did about 20 ten hour days. Did not kill the blades as fast as your WO. Paid by the hour, plus blades , plus resaw.

@CanadianWoodworks Год назад

I bet you can still smell it

@rickryan1596 Год назад

Glad to see you back on You Tube

@CanadianWoodworks Год назад

Glad to be here!

@kevinmorin7965 Год назад

Jumpy hydraulics often mean frothing in the fluid, bubbles are not getting a chance to float up in the reservoir- or the dwell time in the tank is too short- also and after cooler or radiator in the return line can help dissipate heat that promotes and retains frothing. The jerking comes from pushing compressible air out of the pump and into the motor driving the power feeder. Frothing can also come for mis-sized valves- not the end connections but the valve orifice/flow size can resulting in cavitation and froth.

@CanadianWoodworks Год назад

I have some investigation to do!

@drewsdabblings7747 Год назад

It’s great to see regular videos from you again!

@CanadianWoodworks Год назад

Thanks Drew

@AKdesignsandhardwoods Год назад

That bad boy is a monster. Loved be insta videos of you bringing it in.

@greatitbroke Год назад

Cutting really nice veneer on that resaw.

@mathiashosang571 Год назад

Richtig coole "neue" Maschine!👍✌

@basiedp Год назад

Suggestion on hydro, just check pressure regulator. Maybe dirty so bypass fluid not constant to tank. Also make sure inlet and outlet far apart as to prevent any air bubbles that gets formed at return to tank not go back into system. Maybe not the problem but worth a look🤷‍♂️

@CanadianWoodworks Год назад

Thanks

@fish3dp372 Год назад

Good job!!

@bobbabcock3847 Год назад

Good Canadian content

@CanadianWoodworks Год назад

Eh!

@floydbrennan9300 Год назад

Awesome job sir it's always great to see a Shop get new equipment

@SandyMasquith Год назад

Awesome to see those tools in use. Well done!

@martinmoskal2379 2 месяца назад

Looks like someone wants solid oak flooring or architectural mill work of some kind, was the client a flooring manufacturer lol. Who else would want this much oak, crazy how much more work it is even after youve resawn and gang ripped everything. Now it all needs 3 or 4 more passes on a shaper for the edge profiles and bottom face.

@CanadianWoodworks Месяц назад

This was for a large company, it was being used as wall and ceiling cladding, no more molding required.

@stanleybell2672 Год назад

Restore that beast!

@ryanmccormick171 10 месяцев назад

Thanks for showing the equipment and process. Would you care to share how you price this custom work?

@CanadianWoodworks 10 месяцев назад

That's always a tough one, for both gang rip and re-saw we have a per linear foot price. If a small job we have to add a setup fee also.

@katekeough9819 Год назад

Very slick love it you should have a safety policy that long hair is tied back

@CanadianWoodworks Год назад

Your right long hair should be tied up

@katekeough9819 Год назад

Even me I forget with my hoodie strings and I had a close call one time now I make a knot and cut the excess off

@daveweber1331 Год назад

Holy batman resaw monstrosity!! How wide a board will that beast re-saw? And now "gang-ripping"?? Is that even legal?! 😉😜 Hey, if you sound like a robot at all, it's a terribly benevolent one! 😊🤠

@CanadianWoodworks Год назад

I don't know total height on the resaw, but it's a lot if you needed it.