Work On Your Electric Bike With Ease 

I use two 99-cent spring clamps from my workshop. Clamp 'em on the handlebars and turn 'em upside down with the bike. Works perfectly... very small and very light. I keep 'em in my rack bag.. Thery do the same thing as these very expensive doohickies.

I just bought these after watching this video, they work awesome. Mine has improved velcro straps instead of the rubber bands. I couldn't be happier with them and highly recommend this product. Made taking off my rear wheel off a breeze.

I have those and in a year I have needed them twice. Very reliable build quality.

The other thing this could include is a rolled up mat that could be placed under your seat. This would help protect the seat from scratches caused by turning the bike upside-down on gravel, concrete or asphalt. The mat could be rolled around the tripods when they are connected for storage. A velcro strap could be added to help keep everything grouped nicely in your gear bag.

Literally 2 minute job, If you have the ergonomic flat palm handle bar grips twist them so they point upwards upper most and use either allen key or philips type screw driver to lower your instument display tucking it out the way, as you flip your bike upside down, it gives you loads of clearence, works great on my Engwe E26. cost Nowt!

watched your video on tire flats and flat out being the winner. Thanks for this as I got stranded in the middle of nowhere with a rear flat. I managed to get back with my air pump. I know I was lucky to make it back! I will be watching all your videos as you really show so much information about bikes Just the best reviewer and I Thank you for all your energy doing this Sheila Vancouver BC Canada

You just need 2 pieces of pipe insulation sponge cut to size and cut down long edge. press onto handlebar or grips. Can also be stored in your bag or just pressed onto any part of your frame while not in use. Find some off cuts in a builders dumpster or friend/neighbour etc. if you dont wanna buy new.

Ok... Two things. The Handlebar Jacks look so great. And, loved the little add on EV segment at the end.

Just bought the bundle with bag seat cover ! Thank you as always top product !

What a fantastic tool. They should sell it in some sort of tough bag that fits over a bike seat to protect the seat while the bike is upside down on the stands. Then keep the stands in the bag when you're not using them.

Thanks for the review. Wife and I recently purchased e-bikes (love em) and on a recent ride got a small thorn. Fortunately, made it home without noticing until the next day. I woke up this morning realizing that I do not want to turn this new brute over on the side of the road with all the "very important" stuff on the handlebars. Plus the grips are a beautiful brown leather. So, half awake, I started thinking of inventing something to support the handlebars. After coffee, I decided I better check and see if someone else already thought about this (typically true). This is much better then my pre-coffee invention.

I just put bar ends on my handlebars which not only keeps the handlebars off the ground but gives me an alternative grip. Thanks for sharing.

BRILLIANT! Thanks for this info. An E-bike can carry stuff like this or a rechargeable electric air pump with no weight problems. TIP: protect yer seat by resting it on yer cycling gloves or helmet.

Your audio the BEST ever of any ebike blogs I have followed. Keep it up.

I just used the foam that came in my bike box when I put it together

I just bought a set of the way cool Handle Bar jacks - - They now come with velcro straps instead of ol rubber O - Rings !!!

I have a rad rover, and I love your detailed style, simple and straight- forward, I look forward to your videos on improving my bike, I am an ancient Canadian, who rides everyday, 6ooo km a year, I don't want speed, but I want power. and better tires, brakes pads etc.

This Handlebar Jack is a fantastic idea. I've been racking my brain how to flip my bike upsidedown to work on without damaging the display. Sold!

Sir , you are too cool, I'm 76 and that is not common words for me ! Just ordered the bike jacks, Thanks for all you do , Judd .

I just bought and use a "handlebar extender" for this. It's offset by a few inches from the main handlebar, so when I turn my bike over the extender makes all the contact with the ground, and nothing on the main handlebar touches the ground at all. These extenders cost something like US$10-20 depending on size and material. You can even remove it from the original handlebar when you wish if you don't want it on there all the time...just install it when you're working on your bike. I bought a fairly long extender bar so the bike is less likely to tip over. If I leave it mounted all the time, it's great for unexpected repairs on the road... However, the temptation may be there to just put more accessories on the extender handlebar...but of course that then defeats the purpose of buying it to support the bike during repairs.

Did not realize this video is old. The product looks upgraded and better! ❤️❤️

bike flat for me are a thing from the past , over ten years past i'd say => "Stop Flats" i use two in each tire and reach way over each side , i have removed everything from my tire metal screws , electrical cable tacks ,nails , thorns but never since had a punctured inner tube . this jack is very ingenious as are the stop flats liner , cheers & hope spring will be here asap

Thanks for this presentation... I watched it a few days ago and was so impressed, I went to the website and ordered the v2 bundle. The experience with purchasing and even the shipping was great. My package arrived today, and first thing I did was test it... This really rocks!!!

You are like everybody's best friend! Awesome gadget... Can't wait to try mine out!

Cool gadget i like the compact feature. I've been using heavy duty 2" spring clamps from harbor freight to do the same thing. The bike sits 31/2" of the ground I clamp them on handlebar grips and flip bike over.

just purchased and it was lower than I anticipated.....thank you for showing it to us!

I bought one of these Handlebar Jacks.. it works great! Thanks Kyle...

From Sydney Australia. Just received mine. Great product and well built. Very impressed.

I still wish I had a good strong stand at home but this is genius for on the fly repairs.

It is said that the simple idea's/things are the best! This one fits the bill, excellent product.

I have a set of Handlebar Jacks and use them all the them. They are awesome!

I am sure Kyle is very good at what he does...but he really drags things out.....GREAT TOOL!!

Well Kyle, another great vid to watch. I am a New and first time owner of an ebike. I went with Himiway for three reasons 1. Didn’t research much. 2. Price 3. 750w motor (Canadian province limits of speed suites 500w). Only have had bike for 3-4 weeks and have over 600klms on it. I guess that being said I am happy with the bike. Since buying I have checked out a few others, I think if I was looking to get another bike I would seriously look at Bolton bikes. After watching your helpful informative videos I get the feeling you really care about owners and future owners of ebikes. Thank you very much for all you do making these RU-vid videos. Regards. Ken Spock

Oh man, a 30 sec video for 22 minutes, come on... Don't know even what I was lookkig for

Way to go Andy, great invention, good to see there are still thinking people out there that can look at a problem and come up with a simple yet, highly useful tool to solve the problem. I'm going to buy me a set of handle bar jack stands. 🖖😎

You're right - what a great idea! Bought one a few minutes ago.

If I was going to make something for this, I'd try to design an inflatable stand (with saddle protector). However, I rather like the simplicity of the spring clamps, and will try that out now!

3 1/2 minutes and he finally got to the point

Just ordered mine! Thanks for the discount!

I'm new to To electric bikes And I'm loving it

Just got my first E mountain bike and came across this video and just bought the handlebar jacks. I had a flat tire the other day on the trails and could not flip my bike upside down because of the controller. I fixed the flat but was a pita. Unfortunately these jacks are out of stock for the next month. But these are going to be a great tool. Thanks for the information.

A couple of small blocks of EPP, trimmed to fit the Handlebar Grips, (expanded polypropylene, softer variations are what a "pool noodle" is made from, stiffer variations are used to pack expensive electronics in boxes for shipping). Easy to Pack, and Much lighter. Still, it's a Gr8 idea ! 👍

Got it! I love it. And have used it on the trail.

Thank you Mr.Bolton

Haha, those tiny handlebar jack stands are adorable. I might try some spring clamps to do something similar and see how it works out.

You can accomplish the same thing for short $$ Pool Noodle! Cut into 2-3” sections - $5? Free? Weight- a few grams?

Please note that Kyle was reviewing an older model and the current handlebar jacks come with a hook and loop cinch strap with a silicone backing to keep things in their place.

Got a set and used them already ,work great.

Nice solution to a common problem! A win for Andy!

bought them way back when you first exhibited them on your channel Kyle... have used them many times thru the years... still holding up great one of my best on the go tools....

I just bought a pair of handlebar grips with horns. Works a treat.

This is awesome. I can’t wait to get one.

Thanks for this review! I just ordered my first e-bike and didn't think about how all those controls are on the handlebars. I ordered a set and will feature it on my channel soon.

Thanks for the code! I’ve been needing something like that. I’m thinking a Bolton ebike is in my future!

Hi Thanks for the tip about the handlebar jacks. Paused the video and ordered it right there. Will take some days to get it since I am in Sweden. 👍

Amazing product, great idea, congrats.

Just ordered, Thank you Thank you for your purchase! Hi Larry, we're getting your order ready to be shipped. We will notify you when it has been sent .

Not gonna kid, AWESOME invention. Small, compact and well thought out. Been riding e-bikes for years as a way to commune five out and back from work and? Got VERY good at repairing flats on the spot going to and from work with my own repair kit. Usually only takes 20 minutes and I'm good to go which beats pushing your bike for one hour plus, THEN doing the 20 minute repair. When I get a flat on my way to work? Simply whip out my cell phone and let them know I'm going to be 20 to 30 minutes late and then get to work on the flat. Always carried the tools to remove the wheel, tool to remove the tire and had a spare innertube on me and... that dang small and pain in the butt hand pump. Upgraded lately and have a portable electric rechargeable air pump the size of a beta VCR tape. Yea, it's quite small AND powerful save it's digital display for air pressure? WAY OFF! Set it for 50 psi and a tire made for 40 to 60 and? Innertube BLEW UP! LMAO. Pretty sure it inflated by tire closer to 90 psi. Knew that tire felt too rock solid! But hey? As long as the tire has SOME give when I push my thumb into it but is still fairly solid? Good enough WITHOUT overinflating. Disappointed with the digital display but besides that? Awesome, small, powerful electric air pump. Bonus? Got it seventy percent off at Wallmart so? Probably discontinued.

I have a shop stand but this is awesome for on the road.... Ordered!

I have a idea but haven't tried it yet. Super-sized pool noodle that you cut two sections off and slit up the middle. You slide one on each hand grip for upside-down emergencies and the slit allows you to stowe them on your frame when not being used but could serve the purpose of bump guards like old bmx pads. What do you think?

I got a 29 inch bike with front and rear disk breaks. ordered a phone holder, rechagable front and rear lights, a rack and saddle bags. put heavy groceries in the saddle bags and light things in my backpack.

Thanks for the tip. Ordered one today. Great tool for on the road stuff.

I bought a trike, and I am installing a front motor hub. But I had given some thought on how to change a rear flat tire. What I came up with is 2” PVC pipe, one piece going from side to side.with each slip fitting into four way joint, and pieces slip fitting into one leg fore and aft. Then you would insert a vertical piece into the remaining legs, on top would be a T-fitting with the top cut off, so each side can support the cross frame. So you would lift the bike up to set on the stand, and it would hold the rear wheels off the ground while making the repair. Because everything is slip fitted and not glued, when done pull it all apart and stow the pieces in a small tote bag. Haven’t gone shopping for parts yet, but I guess total cost would be about $20!

I just bought that tool. It's the same brand and everything, but mine does not have the rubber bands. My handlebar jack stands has Velcro straps. I got mine from the Ariel Rider website. Which is where I bought my bike. I bought the Kepler. I'm loving it.

The black foam pipe insulation that is split down the middle works great. A couple of short sections weigh almost nothing and could be stored on a part of the frame/ tube.

great bit of kit ,just ordered mine

6:40 handle bar jack

I bought a set after I saw this a while back. There are soooo many guys on the Tube showing You what junk they are setting their bars on while they do work on their bikes. I can't believe this product is not more well known !!!!!

Tis very handy but how cool if each one fitted inside the handle bars 🤔

Thanks Kyle these work GREAT... actually bought them and am using them to install my Juintech/Bolton M1 hydraulic calipers...

I saw someone make a handlebar screen protector a few years ago, but it was bulkier than this and I don't think anyone would take it on a ride. This is really well designed

Dude I so need that, I got so much junk on my handle bars, I used to have to take everything off the handlebars in order to fix my flat, definitely one of the greatest bike inventions, why didn't I think of that😀

Love it... purchased as my bike is way too heavy for me to deal with. its going to be hard to flip it over but i will find a way

Just ordered 2. Thanks for the recommendations. Two thumbs up for your videos

Very bright nice solution. The solution is also at your dollar store and can have other uses in your tool/ camp pack. It's a spring clamp.

Good job using a light 20" bmx for the demonstration!!

Well done as usual. LIked that last bit with the car charging as we are considering getting an electric car soon.

Great item! Would highly recommend!

How safe is it to replace built-in electric bike battery? Can it cause electric shock? Should bike be completely discharged first? Another question is folding a bike (which disconnect controller from battery) reduces chance of battery fire?

SOLD!!!!! Very cool stuff my man. I’m getting into Ebikes and 2021 will be the year some for some commute and for fitness. Great page thanks. Stay safe ✌️

I'm getting this! Thanks for this update 👍

Wow and to think I've been using a scrap piece of 2x4 I cut in half. Now I can buy a new tool.

This deserves consideration.

Great product just purchased one I have a Park Tool bike service stand but this bit of kit is great for urban travel great vlog and Hi from a very damp Manchester UK

I use 'handlebar extension grips' 8" in length*. started doing that back in 1994. worked great, if there soft dirt / mud will need to place down, something under them keep form sinking into soft dirt / mud. * was not a Ebike. just a rat-bike. Also used 2 set handlebar extension grips with 2nd handlebar matching, To make "Bicycle Handlebar Extender"# that was for attaching bedroll to. 2nd handlebar was set at 45 degree angle forward and 16" away from handlebar. # was not a thing at the time.

Kyle very good video, I learned a few thing myself, thanks for sharing. We are riding a trike. And ride with one of your patrons from time to time.😉😎🇦🇹

very cool tool

Pretty genius tool, I don't have an ebike but I would definitely buy it once I get one, or maybe if I win a bolton bike 😄, thanks for the video.

You don't need a "bar jack" or any other specialised and expensive product. Just install old fashioned vertical handlebar extensions that screw onto each side. These look like horns, and if you're worried the right one won't fit because it needs to go over a throttle, - simply install them closer to the centre of the handlebar so that the right one is situated before the throttle. This will also allow you to sit up more vertically when you're cruising downhill and don't need the throttle, or when you're using pedal assist. These are excellent to rest your hands on from time to time in order to change your posture. And they double up as protectors for your display and whatever other gadgets you have attached to your handlebars. Oh, and they're much, much cheaper. I got mine from a teen bike someone tossed, they're Aluminium and weigh next to nothing. No need to attach or detach, they're always there.

I just ordered a set! Thanks for the video

wow its hard to believe no one has come up this this sooner. back in the 70's I worked at a shop that worked on bikes. if you remember the Ram handle bars this would have been great. they was always a nightmare to place upside down.

Bought one for a bike on back order. Just used it. I like it but the legs close up a little too easily so I would recommend the manufacturer change that to be harder to open and close the legs. However, it was excellent for keeping my LCD display, throttle, and brake connections away from the ground. And was certainly more stable than my bike would have been just laying on the handlebars alone. Thanks for all your reviews and tips in general and specifically the review to show me this product which I purchased only because I saw it on your RU-vid channel

Does it have one for the seat section too? - always ruin my seat like that I do... 😉Will buy these for sure thanks.

I got a flat on my aventon sinch yesterday, back tire following spraying wheel cleaner for car rubber, the spray it and forget it kind. I think that was what caused it anyway, because it is so slick and gets down into the seal and for tires that only take a small amount of air, when that stuff gets down inside the rim, your seal is useless. So I propped the bike up on the curb so it stood on the kickstand on the curb and I held up the other side against my body and painstakingly got one side back inside the rim and then the other, pumped it up, relatively fast, then rode about 20 yards and it completely went flat and came off the rim. This was about the time I realized the tire dressing was probably the cause of this. But I got the tire back on again and this time took bungee cords and wrapped my tire around the top and sides so that when I pumped it up it would stay inside the rim. I thought I was pretty smart but I didn't have anything with me to clean up the tire dressing residue so I didn't even get 10 feet and it's like the rim was rotating by but the tire was lagging behind. Sorry about my scratchy grammar. Basically these handlebar stands will come in handy. I just had my roommate pick me up and i ordered a new set of road tires this time. Anyway, I'll see if I can buy these grip stands as well. Thanks

Great stuff.....I've learned so much from you....thank you !

wow !!!! game changer this is too cool an it's a must have if i need to fix a flat on the road thank's for this video an i just order my handle bar jack today thanks for the discount code.

need to see this with a long rear fender with integrated lights

Neat idea, but it's worth mentioning that inverting bikes with hydraulic disc brakes can cause problems.

Great suggestion and reasonably priced...ordered

Killer idea!