World's Smallest 4060 Gaming PC That You Can Build NOW

Подписаться 78 тыс.

Просмотров 341 тыс.

50% 1

Check prices on Amazon below:
CPU: geni.us/UlbRnQg
GPU: geni.us/RQ8J
Motherboard: geni.us/p4lqSR
RAM: geni.us/fFe0t
CPU Cooler: geni.us/2sUPsa
SSD: geni.us/OtxVw
Toolkit: geni.us/07FfP
Monitor: geni.us/bl5Imf
Use iPad as a Monitor: geni.us/JvqsXiK
Alt. CPU: geni.us/FWee2e
non affiliate:
Case: n3rdware.com/cases/yocto
Custom Cables: n3rdware.com/accessories/cust...
PSU: hdplex.com/hdplex-fanless-250...
Other Cases:
Velkase Velka 3: velkase.com/products/velka-3
Gemcase C9: / discord
Lazer3D HT5: lazer3d.com/ht5/
Today we’re building one of the smallest 4060 gaming PCs possible in the Yocto. This video takes you through the entire build process from the components used, including an Intel i5-13400 CPU and the Gigabyte Low Profile RTX 4060.
🎥 CAMERA GEAR:
Check prices on Amazon below:
Sony FX3: geni.us/9xnER
Sony FX30: geni.us/MfrG86B
Sony 28-70mm Lens: geni.us/0SK2
Sony FE 20mm F1.8 G Lens: geni.us/rcXK
📸 Instagram - / devyn.johnston
When you buy through an affiliate link, I may receive a commission on the sale at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.

Наука

Опубликовано:

12 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 424

@nagaki2997 2 месяца назад

Man is going to make a laptop at this rate

@fatrob88 2 месяца назад

😂😂😂

@joesmith3829 2 месяца назад

Sff laptop.

@shoobadoo123 2 месяца назад

@@DazePhaseit's a joke

@gilmanator01 2 месяца назад

Man’s gonna make a flip phone and call it a sffpc

@misteryolo7248 2 месяца назад

This is smaller than a laptop 😊

@NukaOrQuantum... 2 месяца назад

These mini-PCs are honestly my favorite. Small, clean, minimal, and relatively powerful. I should 3D print my own case sometime.

@naoltitude9516 2 месяца назад

make sure to use ABS or something just not PLA, tends to melt

@NukaOrQuantum... 2 месяца назад

@@naoltitude9516 ABS is a struggle for larger prints. PETG or Polycarbonate will be my material of choice, thank you.

@ruslan_yefimov 2 месяца назад

Imagine making it like 27mm thick, while also having a battery, a keyboard and a SCREEN, in case you'd wanna use it on a trip or in starbucks... Oh wait, that reminds me something

@corsinivideos 2 месяца назад

I got a morefine ryzen 9 mini pc, the fan noise was absolutely insane. Sounded like a space ship taking off to do basic tasks. I ended up getting an ATX case and will never go mini again, not worth it for that kind of insane running noise.

@NukaOrQuantum... 2 месяца назад

@@naoltitude9516 I swear I responded a week ago, guess it didn't register. I would use PETG or Polycarbonate filament, thanks for the suggestion

@shutdown970 2 месяца назад

4060 LP is wild

@corpingtons 2 месяца назад

It’s so small 😂

@chowdhuryahsanhameem667 2 месяца назад

thats what she said ;-;@@corpingtons

@arikowidtrash7074 2 месяца назад

yes and has the same performance as the regular 4060 right? i think the difference is the price too

@Odinsday 2 месяца назад

@@arikowidtrash7074Same performance and much more compact. There is a $30 markup, but it is a very high quality card, it feels like a brick in your hand. Puts the manufacturing of something like a LP 1650 or 3050 to shame

@Rspsand07 2 месяца назад

@@arikowidtrash7074It's only a lil more expensive, for something so niche it's a good deal. Now the 4060 itself... Huge markup on that crappy card from nvidia. And SFF costs a lot more, it's everything else where you'll be paying a markup, not the 4060. Mobo, case, psu, etc,.

@danielhulan3058 2 месяца назад

Man that case is beautiful. I love the black with gold accents.

@angelodavis3990 2 месяца назад

Talk about perfect timing! Been refreshing your channel for weeks, and there it is! Excited for your latest upload! Thank you bro!

@pradeepmanoharan9914 2 месяца назад

your studio aesthetics is top notch . the way you captured is classic . even top tech people in youtube doesn't fits to your quality of your video. Great work.

@NicholasGarofola 2 месяца назад

Oddly really cool case. Love you’re video dude, been watching for a while

@MorganEdgy 2 месяца назад

reasonable price, great performance, astonishing look, this has everything!

@Sergeeeek 2 месяца назад

Cool! I built a 4070 pc in velka 5 using your guide, works great, thanks!

@marcus-wv9ti Месяц назад

really? how much did it cost?

@Sergeeeek Месяц назад

@@marcus-wv9ti around 1800 USD, but I payed 800 on top for shipping overseas from US and import tax (18% in my country). Funnily enough it is cheaper than buying a lower spec PC here locally.

@wheezel55 7 дней назад

is it bad thermals/perf because of size?

@Sergeeeek 7 дней назад

@@wheezel55 I got an AMD 7600, these new AMD chips target 95c at full load, so no matter what cooler you have thermals will be the same lol. But if your cooling is good it will hit higher clocks at full load for longer. In my case I also undervolted the cpu quite a bit and it started getting slightly higher clocks. It's hard to measure that though, so I don't have exact numbers. As for gpu, 4070 is pretty efficient. I can play Cyberpunk 2077 with path tracing and DLSS balanced for hours. I get around 100-120 fps (with frame gen, so really like 50-60). There is no throttling or anything, so the cooling is good enough. Thermals are not a problem, but noise might be.

@NUDELMOB 2 месяца назад

nice find. they should really make a metal version, I think it'd look stunning

@radiantav 2 месяца назад

That’s a really lovely case. Good build

@vitobozow 2 месяца назад

Awesome build! Thx bro, i want assemble too looks like this project

@Randomness662 2 месяца назад

I was definitely looking at one of these last year, but that was before the LP 4060 came around. Glad to see it's now a viable option.

@b4kuryupl 2 месяца назад

Dude! Outstanding build!

@bigd2911 Месяц назад

Dude this is amazing🔥

@TrusteftTech 2 месяца назад

1. Great video, thank you. 2. It's easily one of the most attractive small form PC I have ever seen. It's beautiful. 3. If only the case was made of metal. 4. If only it was dark orange color. 5. If only I had more than 5 euros in my account! Then I would definitely build one such PC.

@hafuridotus 2 месяца назад

Probably going to look into something like this as my reference build for what I want when it's time for a third build. Right now I'm rocking the Teenage Engineering Computer-1 case, with a 3060 inside.

@golfyoohoo 2 месяца назад

sick build!

@glancevincent 2 месяца назад

You getting me excited ❤

@baths4carsraspberrypicomputer 2 месяца назад

small as a couple hard drives but powerful as a beast

@dmoster 2 месяца назад

This is awesome!! I really hope somebody makes a low profile or ITX-length 4070 Super. It’s such a powerful card for the amount of actual energy it takes to run.

@crispycrusader1 2 месяца назад

That looks like a classy little case

@JEHOVAHbao 2 месяца назад

You are a PRO. Thank you!

@warrennoth6667 2 месяца назад

I've created mine. IT-X format, no GPU. I have it for what. 1 year now and it's been a really good partner, no breaking so far. I've printed it in ASA and it proves itself really strong. I travel with it 1-2 time a week in a backpack to go to work. I think about releasing the files really soon

@lungisaninkosi5724 Месяц назад

Awesome build👍👍

@wayne8797 День назад

My last PC build was 2005 and haven't kept up since. It's crazy how far we have come. These things can fit in my laptop bag ffs lol

@tongoso 2 месяца назад

Beautiful and sleek, of course, really appreciate the comparison with previous build and talking about temps, considerations and concerns, thanks!

@OmniMC Месяц назад

Wow, who knew you could get a desktop so small. I'm glad I've begun to find these videos before I build my first desktop.

@sireduard1986 2 месяца назад

superb detail when choosing the 13400 because it heats up less with the same heatsink... magnificent!!!!

@kizanko 2 месяца назад

Hopefully they make a refreshed version of the case with a little bit more wiggle room for a extra fan and easy fit for the smaller 4060 rtx and better material against heat :)

@Ceaser43 2 месяца назад

this is so cool! love how much work your putting in to give us all the information about the build

@scott5322 2 месяца назад

The best SFF PC channel hands down!

@jonathanbutler6635 2 месяца назад

If you’re interested in something smaller, the minisforum MS-01 can hold a single half height gpu, like the rx 6400, and comes in at less than 2 liters. It comes with a mobile cpu soldered to the board but the options are, a 12450H, 12900H, or 13900H. Not sure there are any better single slot low profile gpus though.

@Weepsy_ 2 месяца назад

An actually proper looking HTPC

@kenblaji 2 месяца назад

RU-vidr Optimum Tech modeled and assembled a 3D printed case of 2.7 liters volume with the same card, but this one is by far more aesthetic and elegant. Indeed the materials can be improved and optimized but I really like what they achieved here.

@provokor 2 месяца назад

Hey Devyn! For builds like these, it's recommended to undervolt both CPU and GPU, right? Was wondering if it was considered hehe.

@johnv746 2 месяца назад

Watching this, I could totally see similarities with Optimum Tech's vids especially in the presentation and style, and also in the scripts (I think I heard some familiar phrases also spoken by Ali on his sff build guide particularly on the intro for the pc components, dont know if its just me lol). Also, they both use 3D printers from the same brand (coincidence? idk). But anyways, the main distinction bet. this and Ali's sff builds is that Ali shows the use of modified components (e.g. perfect length cables, custom pcb controllers, 3D printed cases, etc.) whereas Devyn's builds focuses on PC's which you can simply buy the parts and build them yourself without the need for modifications. Although Ali does also have vids without the use of custom components. I would say I still prefer Ali's vids, but I dont have any qualms with getting inspiration (Its just the way the world works). Anyways, great vid and hope you continue with the creating great content.

@Bender411 2 месяца назад

Really liking the style of case. Wish it was metal.

@Icon1an 2 месяца назад

I built the velka 3, in a similar way to yours. With the addition off a 2.5" ssd that you can fit between the 1U PSU and the case.

@feilko2170 2 месяца назад

did you just challenge optimum ? 😂

@dj8712 2 месяца назад

Even his video style and cinematography looks liks optimum’s😂

@disguiseddv8ant486 2 месяца назад

I believe that Optimum, Mr Matt Lee, and Devyn are all together.

@DazePhase 2 месяца назад

2 days ago I lowered the volume of my PC from 35 to 14,3 L and now this... Come one man, mine build is with 4060 too. xD Love SFF builds, it looks so clean and portable.

@TheUnexpected6 2 месяца назад

You mentioned no softening or melting of the plastic but at 3:27 you can definitely tell some bending has happened on the right side of the entire build. It's quite glaring, but unassumingly you wouldn't find it. Once you see it you really cant "un-see" it.

@joshbracken5450 2 месяца назад

More than likely happened during printing. Very common. Usually just bad bed adhesion and is solved easily with leveling, cleaning the bed plate, or using some type of glue adhesive on the bed plate.

@pixelgamer83 2 месяца назад

First video I have seen from you. On the Ryzen have you gone into the bios and set it to run in ECO mode before? Curious also then how the performance would stack against the intel chip. I know a lot of users run their Ryzen chips in ECO mode and say they only lose a bit of performance but the power draw and heat difference is pretty significant.

@FlukeFIN 2 месяца назад

About that PSU and melting plastics.. I got a secondhand HDPlex 250W off from a seller who told had it powering a 1050ti inside a Nintendo 8bit housing and it still has some mysterious red markings on its one side, matching really well in the Nintendo-red plastic :D On my system its been powering a 1070 for a year already in open air build, dissipating some heat into aluminium rack its zip-tied to, works well.

@juanchopistolas8761 2 месяца назад

nice job bro

@MrMorrigan1989 2 месяца назад

Really like the build, but had to chuckle at Newvember 1:34 :D

@thr3e54 2 месяца назад

Finally I know I'm not insane

@Kirill_Willmann 2 месяца назад

Good and dense arrangement of parts, I like the design. Strict and minimalistic. The choice of CPU cooler is limited by height. There are rarely video graphics cards with a short metal part. Accordingly, the choice of a suitable video card is also very limited.

@VerdonTrigance 2 месяца назад

Wanna see compact mATX cases as well.

@Rubble_ZA 2 месяца назад

Bit late to this but the PSU should have a little more headroom if you're measuring off the wall socket directly. With the peak efficiency being at 94%, in theory you could pull power up to the point the reading hits 265W - probably a bit more though as PSU's generally arent as efficient at such high loads Awesome build though, glad to see more 3d printed cases are taking off as there's so much more potential for new stuff to come to market without the crazy expenses around full metal prototype builds

@strayzilla 2 месяца назад

Your channel has started my new hobby of building PC's and trying new cool pc builds for a hobby instead of gaming on them for the most part. Now, if I could only figure out cable management.

@pixel6726 2 месяца назад

Do you sell the final builds? Or just have a bunch of PCs lying around.

@RobloxianX 2 месяца назад

that's crazy, something even smaller than the Velka 3? Sign me up!

@LouisDuran 2 месяца назад

I love these small PCs. I thought I had a pretty small build with the IQUNIX ZX-1 case. My case is 9.2L case which could fit 2.5x of the Yocto case. I put a i7-14700 and ARC A770 in my case so maybe the thermals work out better for me. ANyway nice build and nice review.

@bounce1721 2 месяца назад

Amazing build! Can I know the length of your custom cables?

@devyn.johnston 2 месяца назад

10cm for the gpu, 20cm for the 24 pin, 30cm for the cpu. They’re available at n3rdware.com/accessories/custom-hdplex-cables

@orangesock6231 Месяц назад

i love the vid. i also have a question, could you find a case thats very small for a single slot gpu build?

@TheCuttz1984 2 месяца назад

Fyi I have had no problem under-volting the 65w 7600. Negative -30 is no problem however I toned it down to-25 as temps were perfect in a Densium with zotac 4070. For when you want as much HP as you get in sub 5l. This build is clean AF btw. Hopefully they release a steel version.

@Wunnabeanbag 2 месяца назад

Id love to see this guy and optimum geek out idk why😂

@Miro. 7 дней назад

i hope you post the total expense too cause it's a drag too go all over the links just to see it's over your budget

@ProfessionallySpicy 2 месяца назад

So how small can you go with a bit of modding the parts? Like if you were to rethink the cooling for the cpu and gpu, or horizontally mounting the ram somehow...

@pmcafrica_ 2 месяца назад

Brilliant 😮

@Laggah 2 месяца назад

What are your thoughts about the Minisforum motherboards with built in Laptop CPUs? Would be interesting to see a mini ITX build with the 4060 with one of those like the AR900i which is a 24 core i9.

@ruslan_yefimov 2 месяца назад

Just get a laptop....

@lizandrotorres8068 2 месяца назад

which cable lengths did you get for all your cables?

@henryhau7987 2 месяца назад

Beautiful

@carlosmiguel4756 2 месяца назад

Awesome build congrats!!! The only potential problem i see here is long term for the PSU! If you're an intensive gamer, constantly pushing the limits, the PSU might die after some months or even earlier! At least 300-350W is mandatory for a system with these specs to be safe in the long term. Now, if you go APU like a 8700G which i think should be the purpose of these tiny builds, then a 200-250W PSU is more than enough :D and i'm probably building one next year with ZEn5 APU!

@caydenpo1001 2 месяца назад

This man just keeps pushing SFF limits and I love it!

@robertofranco4515 2 месяца назад

What's limits is he pushing? He's not doing anything but assembling off the shelf components. You should check out Optimum Tech he actually engineers and builds stuff.

@Who_Does 2 месяца назад

The Finals looks so slick

@zhenjieliang4680 2 месяца назад

This might be a dumb question, but is the air circulation of the case compensated because of its size?

@eskimolost2012 2 месяца назад

with AM5 High Performance Heatspreader with itx am5 and kryosheet would help with thermals better? even with kryosheet on gpu for better temps?

@netnomad47 2 месяца назад

Do a smallest 4070 Super next! With an AMD CPU please!

@Iamdoepi 2 месяца назад

please no amd lol

@samsara7598 Месяц назад

These series is my favorite since traveling alot w my pc sucks and now i just wanna know the best mini pc in terms of performance is

@user-jk5um1om8l 2 месяца назад

What other possible builds could this be used for? Media server? I’m not gaming on this - but would love to use it for something else. Any ideas?

@ytuser2093 Месяц назад

This is a next 15 years Xbox & PlayStation pc build. Great build 👍😀

@dbzssj4678 2 месяца назад

the 250w is for output, given power supplies are about 80% efficient, you can assume that measuring at the wall that the unit is at max input at 120% rated output. On this unit its 300w.

@sm8081 2 месяца назад

Great content, but try pls with lower tdp hungry builds with this 250W fanless hdplex. It is recommended to use PSU at max 80 percent of its max power supplied. There are 7840HS buil-in mobos in the market with lower TDP.

@cameronsmith5395 2 месяца назад

what was the rough cost of this build? rounding up to the nearest hundred ish?

@sergeantsarge7081 2 месяца назад

nearLucid junior is back. :)

@butter_knifed 2 месяца назад

would a i5 13500 improve performance? or is the added heat not worth it?

@miguelcollado5438 2 месяца назад

You can place heat resistant/reflecting tape on the inside of the chassis, around the PSU

@throwingfrogs2832 19 дней назад

I dont think insulating the PSU would be smart

@O4KAST 2 месяца назад

I think you should try undervolting you GPUs in your builds. I think most sff builders are experienced enough to to this and it would add useful information

@UnskilledGamer691 23 дня назад

NICE BUILD ! but this temps :C

@leecm 2 месяца назад

I love the look of tiny cases, but they're too loud in my experience. I left my Louqe Ghost S1 because of the poor thermals and loudness required to keep the CPU and GPU cooled and got a Fractal North. It is silent most of the time, and I have no regrets. That tiny case certainly looks nice though!

@wric01 Месяц назад

How about a mini pc build with passive cooling with thunderbolt4 or occulink. Giving users options for silent day to day tasks and gaming loud when needed.

@randomtvninja 2 месяца назад

Little bugged I can't just buy the STL and print this myself, but pretty cool case.. most likely will be my living room HTPC setup

@TechTyrial 2 месяца назад

hey i was wondering what is that square dome light at the top called?

@SaperPl1 2 месяца назад

I wish more people advocated for being able to plug the GPU into the single PCB riser in a way the pci fingers can intrude into the motherboard IO. Asrock has boards like this right now, but there's no specific info why.

@MitternachtAngel 2 месяца назад

Love the itx from factor but it´s a pain and everithing is more expensive. Now I have a Jonsbo d30 but I´m planing to do a mATX build using a Jonsbo C6 with a Thermalright Assessin 120 for an i7 12700k and sell my 3070 to get a 4060, for the size a heat output. Completly innecesary but will be fun.

@TheSorrowedMan 2 месяца назад

Amd 7xxx series boost until they hit 90c, if they can, you can change that in bios if you don't like it.

@pju28 2 месяца назад

Is it possible the same case to workout with only AMD components?

@conmannicknameleroy3493 2 месяца назад

Sorry for the dumb question but I haven’t been able to find a straight answer do you think the minis forum bd790i would fit in this case with a low profile or normal profile fan? (Asking anyone)

@marsovac 2 месяца назад

I'll sticky with my old Raven RVZ01B. It is almost 14 liters, but at least I can have the 7800X3D, 4080 Super in it and 16TB of Jellyfin media. But if I had lower requirements for a PC this would be a cool one.

@latibass 2 месяца назад

Undervolt everything!! 😊

@Neopulse00 2 месяца назад

I wish the Yocto+ had room for a 52mm CPU cooler. Would have helped a lot.

@antondovydaitis2261 2 месяца назад

Thank you very much. A quite interesting build. I look forward to learning more about these small builds.

@maximilianpetelo3061 2 месяца назад

the finals game play holly.

@evancassady4846 2 месяца назад

Should do a collab with DIY Perks!

@richardduba9151 2 месяца назад

The thing is, with all cases on this channel that tried to utilize the Low Profile 4060, all were suboptimal because they completely block the airflow of this gpu. Having vertical fins on the heatsink, it pushes the air on two sides and it were always blocked in all cases featured here. However, there's one case that's actually MADE for the 4060 LP. It's the A24-v5. The panels are vented EXACTLY where they should, so the used warm the air of the gpu can leave the case instead of getting immediately blocked and trapped like here, and every other that was featured. For this reason, I think the A24-v5 is the best for the LP model (riserless, 70mm cpu cooling clearance, 3mm thick panels) and the Velka 3 is the winner for anyone having a single fan gpu.

@devyn.johnston 2 месяца назад

It has ventilation on the side and bottom of the gpu - imgur.com/V8PYrFo

@richardduba9151 2 месяца назад

@@devyn.johnstonThe riser is blocking it on the other side. Same with the Gemcase where the psu blocks it and with the HT5, it's the closed panel of the case itself. With the A24-v5, there's a vented line on the backside as well where the gpu exhausts, so that should result in even better temps at load scenarios and also could be layed horizontally like this one. It could prove to be a nice comparison and how sturdy it is, it's definitely up for travel. This video is great for mentioning how the i5 is more suitable for 40mm clearance - that's very useful for people getting inspired to tacke one of these compact cases. Keep up the good work:)