WPL C24-1 Custom Against WPL C24 On A Trail 

Thank you mate!!! Yes the yellow one needs some upgrades to be considered hobby grade truck, that's why I made the comparison. I am planning to upgrade it also sometime in the future. Right now I have to many projects to finish, then it will be yellows time. Thanks again for watching!!

Thanks, I wanted to demonstrate a bit of the sound box..

Thanks Sexy Buggy!

You are welcome Benjamin! Thank you for watching and commenting!!!

@@ScaleCustomCrawlers-SCC what kind of drive shaft would you recommend for a c24

@@benjamincloutiermainerc the one comes included on km kits, the same one wpl sells stand alone, I can get u a link when I get home if u wish

@@ScaleCustomCrawlers-SCC that would be great when I changed my engine and back axle the drive shaft in the rear doesn't connect right it wobbles when I first start it I see the gap onto the non screw side were it wouldn't just stay in place I've tried everything I can think of and the opposite side of the screw just don't wanna line up straight

@@benjamincloutiermainerc here bingo Benjamin and I hope it solves your problem www.wpl-rc.com/products/wpl-rc-drive-shaft?ref=sccrawlers

Unfortunately i cannot answer you that,haven't tried one yet,all my wpl trucks are brushed.

Thanks mate!!!

Whatever help you need just ask mate,relocated rear shocks more to the middle provide more articulation.

@@ScaleCustomCrawlers-SCC hi bud, please can you tell me what wheels and tyres these are on the purple rig?

@@joshbedford6848 Mn tires with mn custom rims. By custom I mean mn rims with wpl outside lip glued to them. Here you can find the whole process of making this truck ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Zqi3Hmicfxw.html

Thanks for the tip, although the noise, are bugs called cicadas. At that time of the year they sing during the daytime so no filter can actually cover them. This is an older video and I was an amateur "videographer". I am still an amateur but my videos improved a lot from that day. Thank you for watching Junkman and commenting 🙏

Yeap the metal front knuckles provide much more steering angle, and to he honest I prefer the wpl v4 tires, much more gripppier. But I am trying to find bigger tires for my purple c24-1.

I am glad you enjoyed it! Thanks for watching yesus!

Thank you my friend for watching! 🙏

The rear shocks are mounted on shock absorber extender and moved one hole closer to the middle of the truck.Stock shocks,just angled

@@ScaleCustomCrawlers-SCC so there is no spring upgrades for more flex

@@thelancashirerider8868 Nop,only relocation of its mounting position and more angle,to the rear shocks

Thanks a lot Li!I now own 2 1/10 trucks also but i started my videos with only 1/16 scale trucks.You have a great collection of videos also!Subscribed also 😎

@@ScaleCustomCrawlers-SCC yes, always start from some where.(hard to stop)

No no no, you cannot stop.. It is too addictive

@@ScaleCustomCrawlers-SCC i know i start from a 20 bucks rc car, now........

Thank you!!!!

The purple truck is on Mn tires, the yellow truck is on wpl v1 tires

Thanks a lot my friend, since that video I have changed a couple of things on both trucks, but the main core is the same. Both running v3 Electronics but the yellow truck is fully built right now also with metal parts. My only dis on the v3 electronics is that you cannot adjust the steering trim(you can manually thought by using a different hole on the servo). I love the board for the slow control on low gear, drag brake and the sound system if you enjoy the extra noise.Or your other go to could be a hobbywing 1060 with your preferred transmitter. I have both set ups(my c34-44 both running 1060 esc). I am not so much into 24th scale trucks, as I enjoy my 16/12 scale trucks. But i do love bigger scale trucks. For me the wpl trucks were my first rcs which I worked one. For the price you can't compare them for anything else but you will need to work on them more. My go to upgrades would be a KM truck, paired with anything you like electronic wise. The c24 chassis needs only one improvement and it is to raise the two speed gearbox. I started with one because I wanted something cheap but scale lookin, now I own a fleet. Start with one you like more body wise . I hope I did helped! You can find affiliate links in my videos for parts or the trucks! Thank you for watching!

Was the 1060 a noticable upgrade from the v3 setup? Thanks for the help

@@chrish9502 By combining the 1060 with my preferred transmitter, yes I could say so. But the slow modulation and the drag brake on the v3 wpl board is also very nice, if not better sometimes compared to the 1060. You are welcome my friend, don't hesitate to ask anything.

Thanks! Most of the parts I am using I have them listed in the description. For the most, I am using wpl two speed gearbox, stock factory shocks just angled for more articulation. For axles I used Mn axles because they are wider from wpl ones.

Just stock shocks of c24-1/c24/c14.The springs soften over time.The rear ones are angled and repocated with some shock relocators more to the middle for more articulation

@Scale Custom Crawlers I see. I can't really use those shock relocation brackets with the accessories I'm currently running, the screw is being used and the bracket wouldn't sit flush. Thx for the reply!

@@jakeclauson9863 I see! Thought I run those relocators without them sitting flush on other trucks I got. Take a look here if it helps at all ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Zqi3Hmicfxw.html

@Scale Custom Crawlers hmm they might work. I should have said I have a set I 3d printed. They are a bit different. I also have 3d printed front inner fenders that extend back to that 2nd shock mount and it's fairly thick. Btw if you can get access to a 3d printer you can make some cool wheels. Would be a bit easier than trying to custom fab a set

@@jakeclauson9863 3D printer is the next investment i would love to head on.I do have a set of printed wheels on my c44 if you have seen it!?!Its a whole new world and i think i will love it.

At that time the yellow truck was completely stock, right now I have a set

@@ScaleCustomCrawlers-SCC the process of the build is half the fun right, nice work bro

@@t.c.423 indeed it is!!!! Thank you for commenting!!!

Greetings from Greece my friend! The tires on the purple c24 are from mn99(or mn99s), I just glued an outside rim of a wpl wheel to the mn wheels for wider stance. Keep in mind the tires are not good and you can find tons of new 1.0 inch tires with better compound!

It is custom made,brazed from brass wire.I stripped the wire, straighten it and then brazed it.

Thank you! I guess the language is Indonesian right? At least what the Google Translate say so.I am glad you enjoyed the video.

They are standard MN tires,not the best tires,i believe wpl kit tires are much better compound,but i wanted something bigger to complete the look

@@ScaleCustomCrawlers-SCC yeah I'm trying to find something wider and taller and I'm not familiar. With these sizes.

@@jonathanbarnette8713 they are definitely bigger than wpl tires, you should try them

@@ScaleCustomCrawlers-SCC can you send me a link to get to them!

@@jonathanbarnette8713 of course, later when I get home cause I am at work right now

Thank you!!! I am glad that you liked it 😁

You could definitely say so!But if the yellow truck was upgraded with metal axles and 2 speed would be even a better comparison of c1 and c2 on 1/16 scale

Thanks a ton my friend!

Greetings from Greece my friend! The tires on the purple c24 are from mn99(or mn99s), I just glued an outside rim of a wpl wheel to the mn wheels for wider stance. Keep in mind the tires are not good and you can find tons of new 1.0 inch tires with better compound

@@ScaleCustomCrawlers-SCC My friend, what do I have to do to make my c 24 flexible like yours? all this flexibility and stability, I would have to exchange its suspension for the suspension of the mn 99 scale 1:12?? which parts exactly do I have to change and which parts of which carts and which scale do I have to put in my c 24. give me this tip please🙏🏼

@@user-ry1wh8qq5d Take a look at my description, I mention affiliate links with all the parts i am using on both trucks. Also here a video of how i created the purple truck, I hope it helps! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Zqi3Hmicfxw.htmlsi=DYcDqnxDdGD0NsbE

Thanks bro🙏🏼

@@user-ry1wh8qq5d You are welcome my friend!

On which one? Purple c24-1 has MN tires, they are soft but not too grippy, c24-1 has soft kit tires but no weight.

@@ScaleCustomCrawlers-SCC I’m taking about the purple truck

@@Kefe376 normally i use wpl v4 tires, they are much better compound. This truck though, I wanted a more aggressive look, can't find decent tires for this size

@@ScaleCustomCrawlers-SCC fair enough

@@ScaleCustomCrawlers-SCC I just prefer performance that’s all

I always paint my trucks,i used primer and then just acrylic sprays,i buy them from local paint shop.

Does it not scratch off easily?

@@richardmarsden6516 4-5 layers of paint,and some weathering done to it,still has tiny scratches from rocks.Beneath the purple there is primr,again multiple layers.I will bring some of it whenever i gonna make a v2 of the truck

Thanks a lot Lukas, stay tuned cause the yellow c24 will get tranformated 😋 Thank you for subscribing

@@ScaleCustomCrawlers-SCC ok cool greetings from Sweden

@@lukaszpbear6 Greeting to you my friend from Greece