Very helpful but in my case - i have wifi conection- after conected wire sensor my X2 shows only information "online" and i dont know how to set the sensor
Is it possible to connect two sensors to an X2 controller that has only one pair of sensor terminals? For example, I would like to connect both a soil moisture sensor and a wireless rain sensor. If this is supported, how is the wiring done: in parallel (one wire from each sensor to each sensor terminal) or in series?
Excellent instructions! One question; the X2 unit sensor terminals come with an adapter that looks like a jumper. It obviously fell out when removing the two screws. Does this need to be re-installed with the sensor wires? Thanks!
Thank you for contacting Hunter Technical Support. The jumper plate is to be left in the controller if no sensor is installed. The jumper wire is designed to be removed upon the installation of a Hunter Rain Clik sensor. www.hunterindustries.com/support/x2-connecting-clik-sensor Thank you again for contacting Hunter Technical Support. Please let us know if we can offer any other assistance.