How to Access HX Escooter P-Settings - www.hxescooter.com
There are 4 adult models in HX Scooter Store, Scooter X6, X7, X8, X9, generally the same steps to access the throttle setting menu, except P4 setting on the X9 scooter:
1. Power on your scooter.
2. Long press the Power & Function button at the same time to enter the menu setting, screen displays “P0”.
3. Press the Function key to toggle through the setting items of P0-P2.
4. Use the Power button to get to the P* setting.
5. Press the Function key to adjust required value.
6. Press the Power button to exit the P* setting item.
7. Hold the Power & Function button at the same time to save & exit the menu settings.
HX X7 X8 X9 Scooters secret menu values:
P-settings allow scooter riders to customize their ride on scooter. The 4 programmed features as below:
P0: Speedometer units (km/mile) switch - Kilometers = 0 (default) | Mile = 1
P1: Cruise Control setting - Cruise On 1 (default) | Non-cruising = 0
P2: Startup mode setting(kick-to-start or zero-start) - 0 start = 0 | Non-zero start = 1 (above 3km/h, default)
P4: 3 gears maximum speed setting - Speed limit 20KM/H = 20 | Speed limit 25KM/h = 25 Unlimited speed = FF 4
X9 Electric Scooter P4 Setting (remove/limit the max speed)
1. Press Power & Function key at the same time to enter the menu setting, and the screen displays “P0”
2. Press Function key to switch to the P1 setting item;
3. After holding the brake lever, press and hold the Function button for 2 seconds to enter P4 to release the brake lever;
4. Press the Power button to enter the P4 setting item;
5. Press the Function key to set the required P4 value, the specific values are shown in the previous section; ( FF=unlimited speed; 20=20km/h; 25=25km/h)
6. Press the Power and Function button at the same time to save & exit the P menu settings
10 июл 2022
