Xfly-Model B-1B Lancer "B O N E": Flight Review/Top Speed

Подписаться 6 тыс.

Просмотров 2,1 тыс.

50% 1

‪@bananahobby‬ ‪@xflymodel2017‬ ‪@xflymodeltw3475‬
00:00 Intro
01:32 Flight
06:14 Post Flight Report
Plane: Xfly-Model B-1B Lancer "B O N E"
Pilot: BD Tennessee
Field: KCRC
Weather: 86 / 7-10 mph wind
AS3X Gains
(High)
Roll - 16%
Pitch - 58%
Yaw - 68%
(Low)
Roll - 8%
Pitch - 29%
Yaw - 34%
Multiplier - 4X
*Balance Neutral at 88-90mm from leading edge at Wing Root. (Wings Forward and Gear Down)
*Top Edge of Battery (847g) to firewall: 30mm
*Wing Sweep Elevator Compensation: 10mm Up Elevator
Rates
Aileron:
Low: 8mm
Medium: 11mm
High: 14mm
Elevator:
Low: 15mm
Medium: 24mm
High: 32mm
Rudder:
Low: 5mm
Med: 9mm
High: 18mm
Flaps: (mm)
Pos 0: Flush with aileron/wing
Pos 1: 10mm / 5mm Up Elevator
Pos 2: 25mm / 9mm Up Elevator
Speed: 4.0 Linked
Plane: Xfly-Model B-1B Lancer "B O N E"
www.bananahobb...
Receiver: Spektrum AR8360T (Affiliate Link)
bit.ly/3Q5n1T5
Battery: SMC 6s 6200 LiHV - 75c
www.smc-racing...
Spektrum Transmitters and Receivers: (Affiliate Link)
#xfly #b1lancer #flightreview

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@jcb6713 11 месяцев назад

good looking flight and set-up !!!

@BDTennessee 11 месяцев назад

Appreciate the good words JCB!

@dannynorman8442 11 месяцев назад

BD another great video. You’re one good pilot and you flew the plane spot on. Keep up the great videos and thanks for being very informative. Danny

@BDTennessee 11 месяцев назад

Thanks so much Danny!

@SteffenRC 11 месяцев назад

Well done BD.. looks like a great plane to bring to the field on those special days to show off.... I'm sure its a real crowd pleaser.... Thanks for sharing.. Will

@BDTennessee 11 месяцев назад

Turns head for sure! Thanks for watching and comment Will!

@koko-wt1ub 11 месяцев назад

Nice flying!

@BDTennessee 11 месяцев назад

Thanks Koko!

@nirlachman007 11 месяцев назад

Great review BD! Love the detailed info in the description ❤

@BDTennessee 11 месяцев назад

Appreciate you nirlachman!

@paulmullen8316 11 месяцев назад

Absolutely superb review bud I've been holding off doing the bypass as wanted a smooth transition between wing sweep and elevator ive been racking my brain how to do this my friend a short demo would be welcomed by many I'm sure 👍

@BDTennessee 11 месяцев назад

Thanks Paul! Yes ill post video next few days on how to setup.

@paulmullen8316 11 месяцев назад

@@BDTennessee superb bud I look forward to seeing it 👍

@BDTennessee 11 месяцев назад

@@paulmullen8316 stay tuned :)

@helipoor 11 месяцев назад

Yes a tutorial would be good thing for wing sweep settings Please..

@jessejrob 9 месяцев назад

Yes please!!!

@steelrainfpv3383 11 месяцев назад

Man that runway looks slick from all that grease! 😁

@BDTennessee 11 месяцев назад

Bahahaha, thanks!

@txkflier 11 месяцев назад

Nice job and plane. Unfortunately, I don’t have the cash or room to add one of those to my hangar.

@BDTennessee 11 месяцев назад

Appreciate you txfklier! Heard that,its a big jet!

@JeffinLowerAlabama 11 месяцев назад

Brad fantastic flying and Bone setup for smooth flying. Zoom zoom zoom Jeff in LA USA

@BDTennessee 11 месяцев назад

Thanks Jeff in LA!

@tughillrc6327 11 месяцев назад

Very good review and Thanks for your set up info, My question is for your 10mm up elevator on the wing sweep mix what percentage is on your NX10? I know it may be different for everybody however only by + or-2%. Thanks for this Video BD

@BDTennessee 11 месяцев назад

Looking at the monitor,elevator should change by 30 in value. Mine goes from positive 15 to positive 45...

@tughillrc6327 11 месяцев назад

Thanks BD, Mine will be close to the same. However I use a lighter 5300 SMC pack and have the RC Geek Afterburner kit in it so I had to move the battery most the way forward to get neutral CQ@@BDTennesseeI plan on buying the 6200 SMC packs at a later date when on sale if possible

@BDTennessee 11 месяцев назад

5300 works. I have used both. RC Geek afterburnerkit going to look nice!@@tughillrc6327

@davidmcneill3809 2 месяца назад

BD, I'm setting up my plane but cannot get the elevator to slowly move with the wing sweep like you did. I'm using a Spektrum NX-8 radio and the same receiver that you have. Any help you could provide would be greatly appreciated. It's almost ready to maiden and could fly with the wings out, which I will likely do the first few flights anyway. But really would like to have it programmed and ready for the sweep as well. I've been in contact with HH, but haven't had much luck yet.

@BDTennessee Месяц назад

Check out the iX14 video about Flight modes for wing sweep aircraft. Setup is same with NX.

@DronemanJoeRc 4 месяца назад

Hey BD help me out I would be grateful if you can just tell me on your spektrum trans what do you have on flaps up set at mid flaps and down flaps at I dont want mm I know that I want to know what yours is on the trans set at. also on rates what are your high/mid/low set at on your transmitter all the numbers. back to the flaps what are your elevator settings for flaps up flaps mid flaps down I would like the actual numbers you set in the transmitter. I dont mm like you posted MM. If you can tell me that I would be gratefully thankful thanks again Joe.

@BDTennessee 4 месяца назад

Ill check to see if i still have the file. I posted MM cause its easy top measure and helps with all brands of radio...

@DronemanJoeRc 4 месяца назад

@@BDTennessee yes tell me what you have and have you ever seen your rudder when its full over left or right and elevator full up they smash into each other?

@cliffdavis3247 10 месяцев назад

Do you have a spektrum setup file for the ix12 you’d be able to share?

@BDTennessee 10 месяцев назад

I dont.I could share mine if there is way to upload.

@philipshelton386 10 месяцев назад

So mine has arrived and all is setup except CG and Flaps. I'm using the stock gyro setup. It seems that you are using the exact CG recommended in the instructions. Do I have that correct? On the Banana Hobby video, on the stock setup, they mention to not set the flaps to far down, as it will cause interference with the ailerons. They recommend 10mm max measured at the flap rear edge, inboard, down from the wing fairing. Exactly where are you measuring the flap throw? It seems that you are using more than the BH video. I'm asking this, as our field has a landscape fabric runway, 300 ft long and I want to have a short of a takeoff run as possible. I do fly the Freewing AL37 and the B1 Bomber from that same runway. Any help you can offer would be greatly appreciated. Phil

@BDTennessee 10 месяцев назад

Book says 48mm and im using 88-90mm. Half Flaps is 10mm / 5mm Up Elevator and Full Flaps is 25mm / 9mm Up Elevator.I didnt have aileron authority issues with flaps. Full setup details with these included is in description. Runway in video is 330 foot. When i touchdown in correct spot at first of runway it will dead stop by 3/4 of the total runway. Extra flap is slowing me down and i have control.

@philipshelton386 10 месяцев назад

@@BDTennessee Thanks for getting back to me. Exactly where are you measuring the flap travel?

@BDTennessee 10 месяцев назад

@@philipshelton386 i used a deflection gauge.Starts at 0 in center of surface and measure stopping point.

@philipshelton386 10 месяцев назад

@@BDTennessee Thanks! Now I'm all set. Just waiting for a weather window. Can't thank you enough for giving back to the B1B community.

@BDTennessee 10 месяцев назад

@@philipshelton386 great! Let me know how maiden goes. Trying to give back when i can :)

@JohnDavis-po3fm 11 месяцев назад

How do you get the elevator movement slow in your flight mode for wing sweep.

@BDTennessee 11 месяцев назад

Assign switch in flight mode for wing sweep.Setup on a separate flight mode. Set switch for flaps to flight mode in flap system screen.

@cliffdavis3247 10 месяцев назад

but wouldn't that slow down the deploy for all flap/elevator settings? I might be wrong, but I thought that speed setting applied globally to all flap/elevator settings@@BDTennessee

@BDTennessee 9 месяцев назад

@@cliffdavis3247 not when setup correctly.Separate movement speed for flaps and elevator when wings sweep.