that is insane dude i mean i installed suspension front and back on my xiaomi and modified the software to limit the speed to 16 - 19 - 22 kmh and installed a 2nd battery and underlight sistem on my pro2 but this is on another level of moding a xiaomi you guys are legends that dont even look like a xiaomi anymore
Under the board, what is the capacity of the battery? what total capacity? and what is the range then? ;) 3" tires are noticeable as compared to 2" tires?
Hi again! Hi! One more question: I would like to mount a 10" x 3 tire on the rear wheel of Xiaomi 1s. Is that true, I have to turn the rear wheel rim 2.5mm left and right with a lathe? Then 10" x 3 tires fit? Because the original 10"x2 is 155mm and 10" x 2.50 and 10"x3 is 150mm inside diameter of tires. That's why I have to turn (remove) 2.5mm on the right and left on the lathe? Is that right my Friend? Mfg.
It is not necessary to remove the rim to 150 mm, because the rim is very weak! It is enough to take off 2 mm "per side", so to 151 mm, so that the outer tire is a little tight! I just turned mine and it turned out great!
@@messor01 An answer after 2 years?? I only started 2 years ago! You can see what my Xiaomi 1S looks like now! I did an EXTREME conversion in 5 months! I now have 10"x4.50 tires (11cm wide) on it 😉
@@messor01 I meant that I asked this question here 2 years ago! And you are commenting today. So you are commenting 2 years too late! You can see that 🙂
@@don.s_a_l_v_a_t_o_r_e Since he didn't answer anyone, that's why I gave an answer, because it's not just for you! But also for others who want to transform their scooter!!!
It is not necessary to remove the rim to 150 mm, because the rim is very weak! It is enough to take off 2 mm "per side", so to 151 mm, so that the outer tire is a little tight! I just turned mine and it turned out great!
Firmwares are such crappy with apps are worst part and so glad got my plans without using any firmwares apps and also have found select to run 24/7 without getting battery flat 😉🙏👌👍
good day sir. anung sukat po ang tatanggalin sa rim sir . anung sukat po sasabihin ko sa machine shop na ibawas po nila ? sila napo ba mag tatanggal ng motor sa harap ? or ako napo? para rim / motor nalang ang dadalhin sa machine shop
@@RHON_TV yown. maraming salamat sir rhon, always watching your video .. last na sir. panu po kaya pag nahinto2x yung throttle kahit di naman ako naka break. tapos biglang dina gumana throttle nya. tapos off ko then on. nagging ok na. ? baka kasi delikado eh. 1 bar na sya nun pero hindi pa blinking sir. salamat sa sagot sir. lagi kami nanunuod ng group namin sa pinas sa mga tutorial mo. saka etong kay sir alfred
Se puede bajar la llanta un poco asta el alambre de acero que lleva afentro . Pero tenias wue bajar el Aro eso biene de Fabrica, esa llanta que pusiste y mas la rebaja , rsta bailando Mala Obra
I don’t think this guys want other to have what he has he is all about showing off what he has that why he didn’t share any link or answer all your requests. Thumb down.