XIAOMI Mi Air Purifier 3H /Air Purifier 2S - 0% filter remaining - HACK RFID ! 100% WORK

Подписаться 190

Просмотров 61 тыс.

50% 1

XIAOMI Mi Air Purifier 3H - 0% filter remaining - HACK 100 % WORK
#xiaomi
#AirPurifier3H
#filter
#oczyszczacz
#reset
#xioami
#filters
#hack
#reset2022
#substitutes
#rfid
#substitutes Xioami
#hack
#Purifier3H
#test
#czyszczenie
#zmiana
#restoration
#reset2022
#filtr powietrza
#xiaomifilter
#modified
#0% xioami
#Xiaomi Air Purifier 2S
resetowanie filtra Xioami Mi Air Purifier 3H
Oczywiście zalecam wymianę filtra na nowy ;)
Pomogłem? zostaw Łapkę :)
Xioami Mi Air Purifier 3H filter reset
Of course, I recommend replacing the filter with a new one;)
I helped? leave the Paw :)

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 105

@s4ndm4ns Год назад

U mnie zadzialalo to: Here is right solution: 1) Remove the air purifier from Mi Home. 2) Disconnect the unit from power. 3) Press and hold the button on the rear of the purifier while reconnecting power. 4) Continue holding the button until the unit beeps. The unit displays some information about EEPROM. 5) Press the front button ONCE. 6) Press and hold rear button for 5 sec 7) Unplug from power. Wait a few seconds and plug back in. 8) Add back into Mi Home

@salamingia Год назад

This worked perfectly in 2 mins!! Thank you!

@sacheesk Год назад

Worked like a charm

@jeocuneyt 11 месяцев назад

bro, it worked like a charm. Thanks

@neroscyter8429 7 месяцев назад

this works..nice..xiaomi 3H purifier..maybe that's why they no longer sell this unit..

@rcarrera 6 месяцев назад

Muchas gracias! Funciono y en menos de 1 minuto lo hice todo

@Abteilol 2 года назад

street fighter ultimate combos are less complicated than that ^^

@IbizaSP 2 года назад

This is not my fault IT must be done on this way 🙂

@gioninho 4 месяца назад

😂😂😂

@Bielk0 Год назад

faster method - just hold power button and display button until you hear three beeps, then release display button while still holding power button and then press display button again. then release all buttons and wait for that screen. then press display button to reset and wait for only "wifi" text on display. then unplug it and plug it again.

Год назад

👍 Thanks, works on my 3H

@fyansinner5010 Год назад

Best!

@birolisirlar1979 3 месяца назад

Perfect, works on my H3

@lipin3268 Год назад

Working perfectly no need to do too much just press both buttons untill 3 times beep sound then press on button and pull the plug .thats all

@KpttpK 2 месяца назад

Thanks ! Worked for Xiaomi Smart Air Purifier 4 as well.

@andyjame9687 Год назад

If you’ve never used an air filter these are great. ru-vid.comUgkx_dppjvjF8BYEmPSDTcgCUdRsgWYLXNHN I ended up with three after starting out with one. The noise level depends on the 1-3 settings with how hard you want the machine to work. You can also upgrade the filters and get one better for pet hair and smells which is a must have in my home. I noticed the air seemed lighter and easier to breathe when running the machine for the first time. Works great every time. Highly recommended!

@naopak6750 Год назад

Not sure how i did it but it went a lot faster. I couldn’t accept it required that many pointless steps so i tried it my way. This is how i did it but im sure it also has needless steps but here goes: while its on hold both buttons until you hear it beep 3 times (~30sec) then turn it off and do the same again. You should be able to hear it beep another 3 times. Turn it on and then pull the cable. Voila! Next time ill try to do it without bizarre ‘pull the cable’ move. If anyone finds a shorter instruction, do share.

@IbizaSP Год назад

that's great, then make a short video so you don't make senseless steps as you wrote it. I'm sorry you had to watch my video and I took 3 minutes of your life. I hope you can find a shorter version, preferably a 30 second one. You can always buy a new filter and replace it, then it will only take 15 seconds

@naopak6750 Год назад

@@IbizaSP Dude 😂 why take it personal?! I just shared what i learned so you can do it easier in the future. Sorry i took away something you could brag about 😂 now you’ll think of me everytime you reset your filter MY way!

@shashanktandon5035 Год назад

This video is authentic. My purifier has a top button instead of a built in screen button but still this worked in the third time

@marko_gajic Год назад

I cleaned my filter with clean water without using any soap or cleaning liquid, just warm water, after that did same reset like on video but just three times beeep, unplugged cabel from wall, plug in again, did three times when got all info on display, unpluged again and it works perfectly, its showing filter 100% so no need to replace it, just wash and make sure its dry before you put filter back on its place

@ixoyc12 2 года назад

Works with Xiaomi Air Purifier 2S. Thank you - you are great :)

@miloslur 2 месяца назад

Tnx, it worked for Purifier 3C.

@rahulwadhawan8040 Год назад

Worked! Thanks bro I did little different Turned it on then Press and hold both display and back button until I heard the beep. Then display screen button to turn it off. Then simply pressed both button for 4 consecutive “beep beep beep” and voila entered that screen. Thanks

@lalo1088 Год назад

thank you for this awsome video, it worked by the first time (3h)

@tripathi958 6 месяцев назад

holy moly it worked not expected , shit man thought i have to spend 2500 inr, now i am just going to clean and re insert filter, thanks bro

@ksewo 10 месяцев назад

Thank you, it worked

@sanakhoori4676 11 месяцев назад

Genius Thx a lot , I will not buy new filter .

@Buurbachi1 Год назад

Holy cow. It actually worked. You just have to set it up again. Thanks!

@paat82 Год назад

I finally found it for Pro H!!! Press the Display button on the front and the Filter Compartment Cover button (!!!) on the back at once for a while and the reset display will be shown. The rest is the same, push Display button, wait until the texts disappear, unplug and replug.

@mstfinceoglu 11 месяцев назад

I really found it after my efforts. You're perfect buddy. You are talking about the opening button of my rear filter cover in the Pro H model.

@belalali3588 Год назад

I don't see the point in doing this... You are still filtering your air through the same dirty filter... My solution: do nothing, the purifier is still filtering even though the display says 0%... Simply ignore the display...

@iammarkpeters 2 года назад

Tried it three times and it finally worked Thanks Dude 👍

@adrn840 2 года назад

Myślałem, że jedyna opcja to wyjąć filtr i zmieniać dane z tagu RFID na komputerze 😂 Dzięki mordo! Oszczędziłeś mi czasu na zabawy z tym 💪

@radbilcz Год назад

Ja robię to inaczej. Pod filtr wkładam folię aluminiową i znów mam 100 procent :) Pisze że mam nieoryginalny filtr ale tylko na początku.

@Pszemko Год назад

It actually worked, thank You!

@orsonlew6006 Год назад

It’s work! Thank you ❤

@alexandrupaviliu1431 Год назад

Thanks man!! It's a little complicated but I did it 😃

@imiyuru Год назад

OMG it worked 100% ❤❤❤

@cimecar1 11 месяцев назад

It works.

@Pr0grammansage Год назад

Thank you very much.

@lescencovladislav2744 2 года назад

It’s working!!! Thanks🙏

@DonzaiNoHana 13 дней назад

What's the point to program it old filter to another 100% ?Just keep using it lol in any case the filter remaining is programmed on number of hours purifier was switched on and at what mode and not actual filter life.

@IbizaSP 13 дней назад

on the display, 100% looks better than 0% and that's the point :) you can always clean the filter using these methods and after some time you know when you cleaned it.

@DonzaiNoHana 13 дней назад

@@IbizaSP umm okay fair enough

@zmiey9174 2 года назад

I do not really understand to follow the steps 😁

@BlockShade-lr9nw Год назад

It works!

@rayj1988 Год назад

Great worked for me!

@BerkUnant 2 года назад

Yeah! It's work! Thanks man!

@hellbirdx Год назад

Hat geklappt beim 3H . Danke

@ityermeer2 5 месяцев назад

THANKS!

@rar7962 Год назад

Hat funktioniert danke dafür

@akkarparkiamopas3401 Год назад

Thanks for this trick. So the question is why we have to do this as the percentage is showing the filter is supposed to be replaced? And we need the air to be purified as good as it could be in the first place, don't we? That is why we buy this air purifier.....

@IbizaSP Год назад

correct. the film aims to show how the filter can be reset, in the description of the film I wrote that it is better to replace the filter with a new one because the longer time of using the filter will catch various bacteria and fungi.

@adsa8037 2 года назад

Thanks.. Its work

@JAVC1962 Год назад

This is how it worked for me with Xiaomi Smart Air Purifier 4 Compact EU Shut off device. Take the filter out, clean at least the primary outer filter with a brush or vacuum cleaner. (Mine was full of fine dust after just one month of use!) Put the filter back Long press Power on touch screen and voilà: 100% 🙂👍

@hournownft5599 Год назад

worked like a charm

@miodrag1245 Год назад

fantastic. This works perfectly. Do you have instructions for 3C? 👍 from Belgrade,Serbia.

@aeakdag2 9 месяцев назад

Aluminium under the 3c.

@ardaakyol1800 Год назад

It works thank you

@Gorky25 Год назад

Mine is 3c and I have only 2 bottoms. How can I reset?

@rnb4life489 Год назад

Hallo, tolle Anleitung aber ich bekomme es nicht hin, kannst du es eventuell als Anleitung schreiben? Danke

@IbizaSP Год назад

Hallo, ich weiß nicht viel, was los ist, können Sie es klarer machen? "Google translate - sorry"

@margad 2 года назад

working 🙏🏻

@robertosetiawan 2 года назад

it’s work thanks man

@saifulsafwan2928 Год назад

👍👍👍👍👍👍👍👍👍👍👍It's works

@sunzriver3z Год назад

1:03-04 "release the display button and hold" but you release power button.... why?

@Dazzman170 Год назад

Why make do they make it so complicated? surely the machine can pick up if a new filter has been fitted?

@achon1771 Год назад

Seems like this one suffers from pixel burn as well... I have the Smartmi purifier and the display looks horrible after one year of operation.

@srta_martin8 Год назад

Me parece muy lioso cómo lo explica él...básicamente tenéis que apretar delante y detrás hasta que hace 5 veces los 3 pitidos, después botón de encender, cuando solo aparece la palabra WiFi desenchufar, enchufar y voilà....al encender saldrá 100 de filtro

@k3y3sh8 2 года назад

masz piwo... works

@chicel2010 Год назад

Air purifier 3 H albo coś robię źle albo na tym modelu nie działa

@pinticangabriel 2 года назад

100% working! Great hint 👍 thx!

@Marix498 Год назад

Few attempts, final succesfull but a little bit different (lasted much shorter to the Final screen) don't know why, but success matters :)

@rezzac 2 года назад

Will try this!

@IbizaSP 2 года назад

it works like this on my purifier

@f0xfirekiapzkiapz446 Год назад

Confusing and too many extra steps resetting.

@bincstoresg9850 Год назад

What a way to lie to yourself, that the purifier is still at 0%. How is this helpful? What if my grandma believes this BS. 🤣

@z3ro7o Год назад

Worked for me? So

@teLmi 5 месяцев назад

@@z3ro7o but the filter is still on 0%, how can a 0% filter smoke and other particles? ;) i think after the hack it cant clean the rooms completly or?

@z3ro7o 5 месяцев назад

@@teLmi if you use it alot with crazy conditions yes its over fast. but we use it all normal. and the owner want you to use it fast so they can sell new filters. 100% works for 2 years

@doroncojocaru6908 2 года назад

Not working...

@IbizaSP 2 года назад

Try

@tamaszlav 2 года назад

@@IbizaSP If he said it doesn't work, he has tried it.

@IbizaSP 2 года назад

@@tamaszlav I meant that he should try again

@ixoyc12 2 года назад

Działa z Xiaomi Air Purifier 2S. Dziękuję jesteś wielki :)

@szmery2985 2 года назад

Ciekawe czy działa z XIAOMI Mi Air Purifier PRO?

@IbizaSP 2 года назад

Hmm, zawsze można sprawdzić 🙂

@paat82 Год назад

I finally found it!!! Press the Display button on the front and the Filter Compartment Cover button (!!!) on the back at once for a while and the reset display will be shown. The rest is the same, push Display button, wait until the texts disappear, unplug and replug.