The battery is new, the contacts are clean and properly tightened. the problem remains. I test the voltage at the starter, it seems to be low, sometimes none. Thank you
@@WindsdoomPatriot I think there may be corrosion at the (minus) ground connected to the Ochobai chassis... or it may be because the area is corroded and the contact point is not good. Check the grounding status in two places: the headlight side and the battery side. All you have to do is loosen the bolt and tighten it again.
@@MotorcycleRepair Thank you for the tip. I measured it today. So far it looks like the relay is the problem. It had a different voltage at the input than at the output. After disassembly, it was oxidized inside. I checked the wiring and it is fully functional. As soon as I install the new relay I will write information here for other owners. Anyway, thanks for the advice. :-)