xTool S1 Diode Laser: Affordable Solution for Small Businesses & Hobbyists with LOADS of Features

Подписаться 108 тыс.

Просмотров 52 тыс.

50% 1

www.xtool.com/?ref=QeZa4pIV3R...
#xtool #xtools1 #lasercuttingmachine #lasercutting #laserengraving #woodworkingtools #woodworkingbusiness
The new xTool S1 laser is a game changer. Truly. It has all the features and bells and whistles of an expensive CO2 laser at half the cost. The versatility of switching out laser heads for different materials, the power for cutting and precision for engraving. Safety features galore to allow you to use it in your home and vent the fumes outside or to an air purifier. The lid also eliminates the need for glasses and there’s built in fire sensors. So many accessories like the rotary attachment (RA2Pro) and automatic conveyor are also compatible with the S1. This video gives an overview of the machine as well as a bunch of product ideas I did over the course of a week. Check out my other videos to learn more about how to make money with a laser, making signs, curved surface engraving, and more.
-⏱Timestamps⏱-
00:00 Introduction
00:55 S1 Features
04:37 Unboxing and Setup
06:16 Magnetic Clips
06:32 Test Cuts
06:56 Cutting Plywood
07:33 Engraving Cutting Boards
08:30 Burlap
08:40 Wood Signs
09:03 Keychain Batch
09:40 Positioning System
10:09 Large Bed, Wood Signs
10:36 Slate Coasters
11:09 Leather
11:37 Glass
12:10 Layered Signs
12:40 Rotary & Tumblers
13:22 Test Files & XCS Software
16:05 Project Overview
16:18 S1 Overview & Laser Tips
To learn more about the machine, add on accessories, other machines, and more, check out this link: www.xtool.com/?ref=QeZa4pIV3R... (Purchases made using this affiliate link helps support the channel and enables more content like this.)
💡Promo Code ($80 off Use code: xTool68)💡
💵US Store: bit.ly/43cjsP8 (Use code: xTool68)
🍁CA Store: xtool.pxf.io/jr0qGM
💶DE Store: bit.ly/49KwvKc
💷UK Store: bit.ly/3Tf0QcJ
💶EU Store: bit.ly/48Sh7ua
💶FR Store: bit.ly/4c5upq1
➡️xTool P2⬅️
💵US: bit.ly/3PhBxWk
🍁CA : xtool.pxf.io/zNGJ9G
💶DE: bit.ly/3TdE4lB
💷UK: bit.ly/3Vfny7k
💶EU: bit.ly/4ad3B5r
💶FR: bit.ly/3wQBZ7G
➡️xTool S1⬅️
💵US: bit.ly/4c8eC9L
🍁CA : xtool.pxf.io/Or0P3P
💶DE: bit.ly/3Vb714l
💷UK: bit.ly/3wZCvjE
💶EU: bit.ly/3VbLSXN
💶FR: bit.ly/3ThgODj
▶️Laser Materials & Accessories◀️
⚙️Inline Duct Fan: bit.ly/3IyfwPx
🪵Hardwood Plywood Mix: bit.ly/44gOkif
🪵Cherry Plywood: bit.ly/4chl3r5
🪵Bubinga Plywood: bit.ly/4c7MdAV
🪵Walnut Plywood: bit.ly/3VgGnqJ
🪵1/8" Basswood: bit.ly/3TwWvDi
🪵Long 1/8" Wood: bit.ly/48SfDQn
⬛Thin 1/25" Black Acrylic: bit.ly/4dhhd1K
⬛Acrylic Pack: bit.ly/4a9znAi
⭐️10 Free Digital Files! ⭐️Creative Fabrica is an amazing resource for getting graphics, fonts, project files, & so much more. Right now you can get 10 free downloads and an amazing deal on an all-access subscription. For the cost of a few files you’d find on Etsy, you have unlimited access to download all kinds of files. Plus, they all come with a commercial license, allowing you to sell without an additional cost. Check out my affiliate link here: www.creativefabrica.com/promo...
-🔨Tools/Supplies I Use🔨-
Full List: www.amazon.com/shop/6_8woodworks
-As an Amazon Associate, I earn from qualifying purchases.-
Laser Cutting/Engraving Supplies: amzn.to/3NfRLNX
Double-Sided Tape Sheets: amzn.to/3DrEn4Q
Large Double-Sided Tape Sheets: amzn.to/3LuphQl
CA Glue: amzn.to/46iXs5D
CA Glue Pack: amzn.to/48jtNv0
Glass Etching Spray: amzn.to/46SJCaq
Cutting Board Set: amzn.to/47qHJ5T
Charcuterie Board Set: amzn.to/3Qwkod5
Small Cutting Board: amzn.to/3qjxpfv
Slate Coasters: amzn.to/3OyNjue
Black Tumblers: amzn.to/3OaSQrS
Blue Skinny Tumblers: amzn.to/3XKbwSI
Leatherette Keychains: amzn.to/446glag
Wood Keychain Blanks: amzn.to/3QzLlMM
Short Spoons: amzn.to/3pCQKb8
Wood Spoon Set: amzn.to/43txDy8
Wood Bowls: amzn.to/3NOk725
123 Blocks without holes (Heavier): amzn.to/3XL1nVM
123 Blocks with holes: amzn.to/3O6Xqrl
Tweezers: amzn.to/48pF6BZ
Laser Masking: amzn.to/3CBSMLo
Nylon Brush: amzn.to/3OamWMs
Roller: amzn.to/3qU24jq
Card Spreader: amzn.to/3qU24jq
Calipers: amzn.to/3Xcvy7W
Bubinga Plywood: amzn.to/43HtmH6
Walnut Plywood: amzn.to/3OaSK2k
Spray Lacquer: amzn.to/3rzsXJx
My other laser videos on RU-vid: • Laser Projects
-📸Instagram🎥- / 6_8woodworks
-💻Website💻- www.sixeightwoodworks.com

Хобби

Опубликовано:

30 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@SixEightWoodworks 18 дней назад

💵US Store: bit.ly/43cjsP8 🍁CA Store: xtool.pxf.io/jr0qGM 💶DE Store: bit.ly/49KwvKc 💷UK Store: bit.ly/3Tf0QcJ 💶EU Store: bit.ly/48Sh7ua 💶FR Store: bit.ly/4c5upq1

@jeffcooper2464 8 месяцев назад

Great video. Just got delivery of the 20W S1 & your in depth review & the materials it can cut & engrave were super invaluable. Also demonstrating the simple setup of the test files in xcs was great. Thanks & I’ve subscribed & can’t wait to see other videos of yours.

@conover1978 Месяц назад

I’ve got one. It’s the next level that pushed my small business forward to what we really were looking for.

@fylith6378 7 месяцев назад

Great video! Thanks so much for all of it but especially the how to material test!

@texastwigs 8 месяцев назад

the layer signs are so satisfying!!!!

@snookieman11 8 месяцев назад

Thank you. You do a fantastic job at explaining everything well. Appreciate your efforts

@SixEightWoodworks 8 месяцев назад

Thank you so much! I really appreciate it and hope the videos help!

@JORGINHODONASCIMENTO 6 месяцев назад

Awesome, thank you. Just a question, how do you set the images for a 360 engraving? Do you put the image in the middle of the tumbler or do you put the image on the starting point with the remaining outside of the tumbler's position?

@Trending_Wor16 8 месяцев назад

Great video, well explained

@SixEightWoodworks 8 месяцев назад

Much appreciated!

@NirvanaWoodWorksbyJanie 8 месяцев назад

Hey Nick, do you happen to have a video or can you make a video for us explaining the different types of glues you might use to glue up different materials to one another? For example, if I would want to mix wood with leather, wood with acrylic or leather with metal. Just throwing example materials out there haha. I don't even know if you could glue some of these together. Hence why I'm curious to get an experts view & go to glues, on this. Also, can you make a video using the conveyor feeder? No pressure :) Thanks & hope all is well

@jennifervejil7638 5 месяцев назад

Hi, I read that you can make color on metal with a laser through oxidation. Like blues and pinks, ect. Do you know anything about that?

@deusprogrammer_thekingofspace 20 дней назад

It's called anodization. You do it using electrolysis. When you electrolize metal it causes an oxide layer to form. That layer is poreous and will accept special dyes to give the metal a color. A diode laser can strip away the oxidization and make it appear to be "engraved". If you use the infrared diode laser you can actually engrave metals.

@ChadsCustomCreations 8 месяцев назад

Great review Nick! You probably caught it already but looks like your air assist hose may have slipped off the connection for the nozzle.

@SixEightWoodworks 8 месяцев назад

Thanks dude! Yeah, unfortunately wasn’t on for most of the filming 😆

@mpmachining7227 8 месяцев назад

Thank you for the video! I have been having a hard time deciding on adding another laser to my shop. I currently have a 50W fiber laser. The tumblers you did look great. With my fiber laser, it is extremely difficult getting the settings right to ensure i dont engrave into the stainless under the powder coat. Between the P2/S1, which would you say does a better job on powder coated tumblers?

@SixEightWoodworks 8 месяцев назад

I haven’t done a ton. The four I’ve done on the S1 were great. I haven’t used the rotary on the P2 for tumblers, but have gotten good results without. But there’s a handful of P2 tumbler videos out there. I really am blown away by the S1 though. So no real difference as far as tumblers. But the option of the IR head for the S1, could help a bunch to clean up tumbler engravings. Will say the best results have been on the F1 with both diode and IR. But that is a bit smaller for full wraps.

@chrisoliver3851 7 месяцев назад

Hi...Could you please show a video about metal engraving like small jewelry ...Love your channel..Chris

@SixEightWoodworks 7 месяцев назад

I just posted a new video showing how to engrave or etch certain metals with the xTool F1. If you want super deep engraving, you’d need a fiber laser. But the IR head on the F1 optional add on of the S1 get great results too.

@swezy207 7 месяцев назад

Can you etch metal with the 40w s1?

@nutusabyt 8 месяцев назад

Greetings from Italy 🖐

@SixEightWoodworks 8 месяцев назад

Hello!

@grantskelton1219 8 месяцев назад

Greetings from Australia

@SixEightWoodworks 8 месяцев назад

Hello!

@ach2935 3 месяца назад

Hi re 40w S1 what is the thickest it will cut on pine or ply?

@jimgohyeah 8 месяцев назад

Just used your code!!! Hope you get a kickback. I hope this is as easy as people are making it out to be. I went basically totally analog after they tried to teach me cad back in the 90s lol

@SixEightWoodworks 8 месяцев назад

Really appreciate it! It truly is as simple as it sounds. I’ve already made several project videos with lasers that would definitely apply for the S1. Will be making more in the future too. Have a blast!

@jamesmanson1555 5 месяцев назад

Great video! Never owned a laser before but considering getting one. Does not having the riser base and/or rotary tool significantly limit what you can cut and engrave?

@SixEightWoodworks 5 месяцев назад

Not at all. You can actually engrave curved surfaces with the S1 and P2 without a rotary. Riser base is only necessary for big items to engrave. Nice add ons, but not must haves. You can always add later if you feel limited.

@jeremydillon4385 8 месяцев назад

Did you use the s1 to make the jigs with the foam? Also would it work with the white foam you get with other products?

@SixEightWoodworks 8 месяцев назад

I haven’t yet. I’ve seen some people use the P2 with foam. I’d imagine it would work with a scoring setting. I’ve just been doing basic stuff with a box knife. But would be fun to try for sure!

@jeffcooper2464 8 месяцев назад

Hi again, Just been watching another of your videos where you used the xTool P2 laser to engrave cylindrical items without the rotary tool as it has the curved surface functionality. I believe the S1 20W has the same functionality so I don’t need to buy the rotary accessory for it, is that correct?

@richellefiscus9309 3 месяца назад

If you want the images to wrap around you would want the rotary

@barrett5229 4 месяца назад

Great video! I’m trying today decide between the P2 and the S1. If you could only have 1 which would it be? I’m leaning towards the p2 for the camera but worried about the real world accuracy

@SixEightWoodworks 4 месяца назад

Definitely the P2. The power to easily cut thicker items, and any type of acrylic is the massive advantage. The camera is really accurate. Budget wise the S1 is amazing. But no comparison to the advantages of the 60w power of a CO2 laser with the P2.

@barrett5229 4 месяца назад

@@SixEightWoodworks thanks I appreciate that a lot! I bought the D1 and I’ve just been frustrated the whole time with alignment, cutting, and trying to do multiple items

@DebsHill1 8 месяцев назад

interested in xtool, as there software is better than other options

@SixEightWoodworks 8 месяцев назад

It’s super intuitive and meets all my needs

@richellefiscus9309 3 месяца назад

U said it opened up the material lost more than the others. What did it add?I didn't see any colors of acrylic, does it not do it? Even with the paper on? And are the pens your wife engraved on plastic?I'm on the verge of buying, just need to figure out which one.

@I-LOVE-EARTH 8 месяцев назад

Nice job. That's a lot of charring on the wood when you're cutting, and some on the engraving and etching...did you have the air assist on?

@SixEightWoodworks 8 месяцев назад

I didn’t early on. Was just up and running trying to learn the machine.

@I-LOVE-EARTH 8 месяцев назад

maybe run some tests and give it another try, because it's doesn't look great.@@SixEightWoodworks

@DoSomethingProductive 17 дней назад

So, I’m sorry if this question has been answered somewhere else. My wife and I just bought the 40W S1 deluxe bundle for Father’s Day and we would like to start selling stuff…how do you go about using licensed/copyrighted/trademarked images, logos, files or fonts legally?

@Tearstank 8 месяцев назад

The Eu site does not offer the feed in table, if they did I would order it. Anyone know if they will?

@SixEightWoodworks 8 месяцев назад

I believe this is due to the Class 1 Laser Safety requirements for the EU. I saw someone post about it on the Facebook group for the S1.

@vvillarreal1880 4 месяца назад

Which one of the two do you think will have easier maintenance? The S1 or the P2? Thx

@SixEightWoodworks 4 месяца назад

I think they’re both pretty easy to maintain. Very user friendly. Just really comes down to what you’re hoping to make. If you plan on doing a fair amount of cutting, the P2 is the best and you won’t be as limited with thicker stock or acrylics. But the S1 is a great well rounded machine. I have another video comparing them a little more as well.

@vvillarreal1880 4 месяца назад

@@SixEightWoodworks thank you! I’ll go check it out. Appreciate you

@NirvanaWoodWorksbyJanie 8 месяцев назад

What are the differences between the P2 and this S1? I’m looking into purchasing the P2 but the S1 seems like it does everything the P2 does. Just curious

@dopatrick1 8 месяцев назад

so what im seeing is it has a tiny bit bigger bed by 1 inch, it can cut hard walnut almost 3/4 inch thick and it can do all this a little fast than S1 by a small amount. unless your a business that need to cut tons of stuff fast. then its not worth double the price. if you need to cut multiple stuff you can buy 2 S1 for the price of 1 P2. uless im missing something

@Whatsintheshop 8 месяцев назад

Following. Same here

@SixEightWoodworks 8 месяцев назад

Biggest difference is the power. P2 can cut all colored acrylic. Can handle thicker wood. It’s a bit bigger. It has the cameras; however the S1 positioning system is comparable. Honestly, unless I was planning on doing a lot of colored acrylic, I’d go with the S1. Massive savings and potential of adding the IR module is fantastic.

@mojo2613 8 месяцев назад

@@SixEightWoodworksDo you have to purchase an IR module made for the S1 or would the IR module from the D1 work on here? Great video, thanks!

@user-fi5nb3pu5e 8 месяцев назад

thank you. I sub'd as well

@SixEightWoodworks 8 месяцев назад

Thanks!

@Black-Elmo..... 8 месяцев назад

OK, in this video, you say you love your P2. Before the S1 was released, I was going to buy the P2. Now that the S1 is out, I'm undecided. If you only had the room for one or the other, which one would you choose and why? By the way, I did win the 2w ir laser head from xTool on their luanch video of the S1, so I've got that kind of leaning me that way. But I want which one is best. I appreciate any help you can give me.. thanks.. JB..

@SixEightWoodworks 8 месяцев назад

I’d say the S1 because with the IR head, you have the versatility for more materials. The P2 is bigger and if you plan on doing a lot of different colored acrylic, that would be the route. Otherwise the S1 handles everything.

@Black-Elmo..... 8 месяцев назад

@SixEightWoodworks thanks for the info.. I've seen videos while researching the different lasers and companies that produce them where they were putting tape over tiles to engrave them. Would that work with cutting acrylics, or is there just no way it would work at all?