This is the Beginner's Guide for the Yaesu FT-818. I'll show you some basic operations for you to get started immediately.
0:00 Introduction
0:16 Master Restart
0:35 How to turn off
0:57 Voltage reading
1:08 Volume RF knob, the speaker, the Headphone jack and selector switch
1:36 RF knob antenna gain
2:25 VFO knob - Main knob to change the frequency
3:07 Sel selector knob - to change the frequency
3:32 Sel for Megahertz adjustment
3:50 Running Man - runs the VFO faster and the SEL knob
4:36 Up and Down button on the mic
5:20 Antenna Ports front and back #7 Set the front or back antenna
6:33 Power output
8:53 The Meter(MTR) for power, ALC, SWR, MOD
11:24 Mode and Band buttons
11:50 V/M button and lock button
12:20 A/B, A=B VFO change from VFOa and VFOb and split
13:30 Display voltage
14:30 Bigger Display
14:59 SSB steps #47
15:55 Mic Gain #46 for SSB
16:28 Changing AGC -auto, fast or slow
17:10 Noise blanker
17:30 IPO - intercept point optimization - you turn it on the preamp is off
19:00 If you can't hear the person speak
19:15 Attenuation -10dB
19:25 Filter setting - NAR for narrow #38 setting
21:10 Program for Repeater
30:20 A look at some of the #functions
31:02 Change Beep
31:15 Backlight
31:40 Volume beep
31:55 Change background color
32:15 Contrast
33:49 Beep frequency sound
9 июл 2024