Yamaha Banshee Bottom End Rebuild | Part 3: Assembly 

The reason I brought it up is I just bought a banshee because I wanted to fool around with my son and his friends for myself. I bought one for myself and the guy I bought it from sold to me cheap but I realize when I got there that he was a flyby KNIGHT mechanic so I bought a whole rebuild kit to rebuild the bike and then I was watching your video to put it back together and was following directions and when you said I’m putting on the clutch basket you did that and then said oh you have to put on a thick washer, then the sleeve, then the clutch basket, but you were already done I was done also and that’s when I realized that this dude that was a real piece of work that I bought the bike from. He must’ve lost the washers because I just disassembled it. There was no washer behind the clutch basket. There was no washer in front of the clutch basket. All there was was the retaining clip, but I almost put it back together like that.

Generous, accurate and excellent information in a super well organized environment. Thanks a lot !

The best part of a banshee! Cases split top to bottom and you can do them in about 30 mins!! Man I’m going to buy another banshee again. Literally looking at some now. Thanks Rocky Mountain and I mean that in a good way!

Makes it look soo easy. Awesome

Great video thanks!

Great quality video

Great video

And sorry, but there’s a lot of people out there that go off of image so when I was following your lead, I’m a mechanic on hot rods on cars I was following your lead. I already had the basket everything installed locknut on everything and then realized when I replayed the double check that you didn’t show them putting the washer on

You guys are pretty awesome.

Good job friend 🙌🙌

Well done brother

WAOOOOOO real nice

Nice video! You made it look easy enough that I can do it.

Man this guys a bad ass

Bad ass dude

wauuu i liked

Should of put it a 4mil crank and cylinders 🤩

EXCELLENT

Can you guys do a step by step AC to DC conversion?

i just replaced my my Idler gear bushing on my banshee, but now the idler gear fits really tight around the axle.. is this normal? thank you

No engine leak down test ?,?

Oh, and by the way, what is the inside of the conical washer? How are they supposed to know what’s the differences?

Muchas gracias por compartir este video es muy importante para los que empezamos a trabajar con este tipo de motores Saludos desde Lima Perú Te invitamos a conocer a nuestro país un abrazo 🛵🏍️🛺🇵🇪🇵🇪🇵🇪🇵🇪arriba Perú

Do you guys sell this kit for the banshee all parts

Wouldn’t use assembly lube on pistons. Rings take forever to break in like that

is the hot rods crank reliable?

Are those gloves resisting solvents like gasoline?

Hello, what kind of Vaseline do you use for the seals you put in the engine? I would also like to ask what glue you use to secure the screws to the engine. I bought a Loctite 243. Can I use it? Thank you for answer.

I see that folks only put the half circlip on the bottom when installing the crankshaft. Is that all that goes in there? Is there another half for the top case??

Happy day my friend, how do I know if the Crank seal is bad or not?

How do you set the timing?

Does the shift detent have to be in a certain direction when you put it on the shift drum??? Cause In getting real nice freeplay//// spin with all my trans and crank but I’m not getting all my gears?? Do u have an idea of what I might be able to do. Cause the shifting mechanism seems to be ok minus that! Thank you for your time!!! And any rude and smartass comments u just need to get a life 👍🏼!!! Thank you to the rest 🤓

dont you need to do a leak down test?

Hi, Will yamabond 6B work for case?

You don't have to check for squish

Who sells that engine stand?? Where can i get one??

What pistons did you use?

High 5

What brand is that torque?.. May you show us that thing where you put the engine to be assambled?

How much $ are we talking about to rebuild the engine?

No leak down test for the case

Hello all right when you were doing the clutch basket you say OK we’re putting on a Henson clutch basket blah blah blah whatever it is but this is supposed to be a do it yourself video you stick the clutch basket on and then after you’re done tell someone oh you have to put on a thick washer before that they have no clue what it looks like and then you stick the basket on and say, followed by another thick washer and a locknutif someone was going off of only visual aspect, they would’ve never put the washer behind that clutch basket

And you’ll probably think it sounds petty but it’s not petty when one of these kids blow up $12,000 they just put in a banshee cub because they missed the washer

And please don’t think I’m being a jerk I’m not being a jerk I’m just stating facts because my son and his friend build these things and I’ve been through this with them multiple times where they watch the RU-vid video missed something because it wasn’t clear and $5000 went down the drain