Yamaha RX 100 Bore Y1,G1,G2,G3,G4 || RX 135 E1,E2,E3,E4 || 5 SPEED I1,I2 || RX KING 3KA20 EXPLAINED! 

Any day bro ☺ Have a great day bro

I hope you liked it : )

Excellent video very well explained. Bro can you tell me from where should I purchase magnet coil with weight to balance. Becoz I have first lot 1996 RXG model. Waiting for your reply

Replace it with RX 135 clutch bell

Thank you 😊

♥️

♥️

I have a Cylinder Head on which is written 4TL5 on one side and E1 on another side. To which bike does it belong ?

: )

Even I have lots jerk once warmed up

My pleasure

Thanks bro 😊

Thanks bro

Thank you, I will

Thanks, will do!

Thanks bro : )

Thanks bro

Thanks for your info yeah 4TL10 IS A 5 SPEED

E1 is RXG BLOCK E2 E3 E4 RX135 4TL00

@@nishanthkps thanks for this information 😊

Thank you, I will

Thanks very much bro .....☺

Glad it was helpful!

Glad it was helpful!

you can go till 3.mm and if we go beyond 1.00mm the mileage is going to be drop and you might face reliability issues from connecting rod and which also emits alot of heat and after 1.mm You won't get good brand pistons so that your engine might seize because of quality of that piston and also with the heat .....etc etc

@@MotoGod thank u buddy... I'm about to do 1.25 with an imported rxk piston.. my concern is if the piston will show up knocking on an over size ...

Thanks bro ☺

Bro RX135 and RXG ka main difference

Almost same but change in magnet coil assy and cluch bell assy

Great 👍

Bhai mere block ke left side pr sirf yamaha 98cc likha hey... Toh ye konsa model hey?

@@shubhamsapkal7466your ans is - Yamaha RX 100, Cylinder origin - INDIAN, Cylinder code - YAMAHA 98CC, batch code - G, I. Carburetor - MIKUNI VM20. 👍

@@vijayendrahirwe502 Hey bro in my rx100 its written yamaha and 98cc on bore... And other side of bore it written G2 so its mean my rx100 is indian made? And i have one more doubt... On my rx carburetor written japan... And on ride side where the 2t pump fitted therer also mention 36L00! So can you please tell me why there mention on 36L00 on my G2 rx100!! Pls reply me bro!

@@shubhamsapkal7466 as per YAMAHA RX Series company catalog information, your bike engine origin is INDIAN - YAMAHA 98CC. With G-2 series block which is good and original. But as you says there is written 36L00 on your bike carburetor, it say that you have MADE IN JAPAN carburetor which is used in RX 100(1985&1986 model ) Block origin - JAPAN. with Y series block piston. Only this bikes have 36L00 98cm3 block with 36L00 carburetor. I suggest you to do not change/exchange or repair or sell this 36L00 carburetor. It's build quality is super good. I hope, now your doubt is clear. 👍

♥️

Thanks bro

Sure bro I'll do it very soon untill then stay tuned to the channel bro ☺

Bro plzz different types of head and cubic volume compaction chapter

Soon ill do it bro currently I don't have heads for comparison and for explanation so ill do it very soon

No valves in 2 stroke ....I already did one video check in the channel

Moto God anything with the reed valves and what over size pistons does the trick

Yes that is original only no need to change

you have to use 2t oil because its a 2 stroke engine. it doesn't have any internal cylinder piston and crank lubrication system like 4 stroke and its Mandatory to use 2t oil or else your engine will ruin.

Thanks bro 😊

change the Clutch Bell

Soon !

❤️❤️❤️

Safe only

Hi @ Rohit ur using I-2 block for Rx-100 four speed??

Yes port matching is not accurate in sleeved blocks and the sleeve quality of material also not that great compared to stock that's why you see power loss a bit on sleeved blocks

@@MotoGod Thank you soo much ,please give ur number

Soon I'll make a video on that soon

Ok bro

Y1 was the 1st production series. How you will get a standard size more of that. Kindly understand it is like asking for a 5 yrs expired toothpaste tube just relating to the batch code, when you already have used new toothpaste of same brand recently.

I didn’t asked for a Standard size.. .25 or .50 will be fine for me!! @Sankar Das

yes few came like that also so thats why check if its written as 4TL00 ITS 4 SPEED AND IF IT'S 4TL10 ITS 5 SPEED

Make a video on porting

Already did check in the channel

not good too noisy

Thanks bro 😊

thanks bro : )

❤️

Yes it will perform good

Yes Sir

@@MotoGod Now a days Yamaha RX100 Bore available in I series bro ...it's true?

Don't know bro ❤️ But check it twice before getting one.

5 speed block

@@MotoGod how to find it 5speed blocks..

Sorry Search in OLX

My pleasure

@@MotoGod ...bro aaj maine rx-z kharidi hai....5 speed

@@MotoGod ....4t l 10 cm(3) block 🔥

@@MotoGod ....bro please Your contact number please

You Can be in touch with me on Instagram (_motogod_)

12hp

I have one available g4 series new...

No idea Bro

☺

@@MotoGod do more I will support you ❣️🤗

I'll make a video in that very soon

no only in Tank

Sure bro

Yes

Thanks bro ☺

Yes there but very rare

Ping Me On Instagram (_motogod_)