Yong Heng 4500 HPA compressor $180 

Oh and it was packaged VERY well. It's solid. I sit my compressor on the lid upside down and put the box back over when not in use. Of course I have to take off my fill whip and wrap the power cord and water lines around it.

I agree, for the small amount of use I need it for it works great! Hopefully ill have a air station once I move since everything has been hectic so have my projects and plans to build up a shop.

I’m not sure what you mean by the auto shut off does it allow you to manually bleed the air in the lines? The bleed valves are manually operated and you can set the pressure to any psi and bleed it as you please. The pressure regulator is only four if you leave it on and forget to turn it off on time it will trip the circuit as an additional safety measure. For the amount of use I will be using this compressor it should last a while and it is it expensive to repair either so spare parts should be purchased an advance just in case. Which I should purchase come to think of it 😳

With the auto shut off the compressor will shut off then you’ll bleed off the air in the system. What I think would be optimal would be to open the bleed valves first, then shut off the compressor. Strictly for the longevity of the compressor.

@@cheapairgunner1966 mine still has manual bleeds and has auto shutoff without interruption if I bleed out first. If (I didn’t know) they have electronic bleed valves or solenoids they might be able to be wired in differently to pop before; maybe by adding an additional pressure switch that pops the valve and not kills the compressor yet.

are you sitting there watching it fill a 80+ CF tank?

I have two 90 ci tanks, nothing close to 80 cf

Thank you! I'm not sure what your referring to since I haven't taken mine apart. I have see an awesome source of information before purchasing from this guy: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-udwo5DMBMzE.html He would be a good source. Also some key areas www.gatewaytoairguns.org/GTA/index.php?topic=137796.0 Hope this helps

@@ProjectAnubisUSA Many Thanks for getting intouch. The link showing the compressor www.gatewaytoairguns.org/GTA/index.php?topic=137796.0 has a post showing the parts of the Compressor. I'm taking about the high pressure hole that the hose connects to. Is there a washer required between the hose male connector and the high pressure threaded hole? or do you simply screw the hose into the threaded hole?

Thanks! I really didn’t use it because I have a thermal gun. I’m thinking getting a good timer that regulates how many work hours I’ve used it for to keep track of replacing all the fluids will go in the cutout.

@@ProjectAnubisUSA I'm new to pcp, but a long time air gunner! I'm watching all sorts of videos, these things are very accurate, but the hand pump sucks!!!! This pump is awsome! Hands down, the best 350$ I've spent in a long time! 250 bar in about 15 min. That's about 3250 psi, love it , and my back thanks you!!!

Royal purple ICE helps keep the water cool when running the compressor since your relying on water flow to wick away heat which is why a bigger pump and water container is also a good upgrade. It also gives you corrosion protection for the materials used in this specific motor keep in mind aluminum and steel requires certain additives to keep from water degrading over time. Some chemicals additives will attack metals so do your research; this additive prevents buildup in your water jackets which can generate heat extraction efficiency. Think of it like antifreeze for your car that helps regulate a constant temperature. You can also use actual ice 🧊, you just want to keep the temperature down but be prepared for potential calcium and rust buildup from pure water. Royal purple 💯 compressor oil because it’s keeps the motor quiet and better lubricant to helps the cheaper designed motor continue to run good. Or vg46 or aw46 as recommended from factory

I didn't really spend too much time that day inspecting it because I was trying to get my tanks filled. Thanks for updating us though

Look at Tim Hill’s comment I explain it and another person found another deal.

I don’t know what that is. If you have an adapter or replumb the hose it will fill anything that needs up to 4500 psi of air. It will need good filters but this air is not recommended for human consumption

@@ProjectAnubisUSA what about scuba

@@alitoroganan2442 it needs to be highly filtered with charcoal for odor and moisture removal filters which will stress this small pump especially in a large tank it will require intervals and time. Scuba pumps are oil free I believe to avoid toxic potential air.

@@alitoroganan2442 GX CS3 PCP Air Compressor, Auto-Stop,Oil-Free, Built-in Water-Oil Separator Filter, Powered by Car 12V DC or Home 110V AC, 4500Psi/30Mpa,Paintball/Scuba Tank Compressor Pump

As you can see they show only a small tank to be filled. You need a big pump for the larger tank or at least it’s recommended to prevent premature wear

AliExpress, search through the listings. Also sometimes they give coupon options for certain sellers

Dang I never checked, it should have them installed just maybe a strip removal... a google search should answer this easily

@@ProjectAnubisUSA found it thank you!

LR44. I couldn't find them local. They're an old alkaline style battery. Bought 15 of them on Walmart website for like 6 dollars.

Aliexpress You have to search through the postings. They post some cheap and charge $200 shipping so you have to look closely. Some places post multiple times to see who just buys and the prices are lower than others.

Go to Pinty Scopes use code 704TACTICAL get it for $230. Fast delivery no hassle, great price

Look at Tim Hills comment, I explain it there and another person found another deal

AliExpress and yes or it was like $20 it’s been awhile but it was a good deal

There is a lot of builds on RU-vid showing the stuff to upgrade but if you seek a tear down video look up sambo cotton he has a full rebuild video series.