Hey everyone, welcome back to the channel! On this episode I replace an old plastic shelf with a nice new shaker cabinet. This project was something I have wanted to attempt for a very long time and finally decided to go for it. To make this process easier I developed a model of this in fusion 360 and made a set of drawings to work off. They may not be perfect as this is my first time doing something like this. If you like these free plans let me know in the comments below and if you think I could've explained or done something different I appreciate the feedback! Also below I've provided affiliate links for some of the product I used in the video. No pressure but if you think something I used would be helpful to you clicking those will help support this channel! As always I appreciate the support. See you guys on the next one!
FREE PLANS HERE: drive.google.c...
Instagram: jamesofalltradesny
Email: jamesofalltrades21@gmail.com
Products I Used In this Video [Helps Support the Channel]
Kreg Pocket Hole Jig (New Style)
amzn.to/3opsurG
Kreg European Hinge Jig
amzn.to/3A7LEoW
Hinges for Edge banded Cabinet
amzn.to/3GPTO9g
Hinges for Full Face Frame Cabinet
amzn.to/3oaLGc... Drill Impact Driver Set
Router Bit Set for Dados
amzn.to/3L8ramj
90 Deg Clamps
amzn.to/3L7x0Ei
Thanks for Watching!
16 окт 2024