You Can Install Shelf Brackets On Cement Block 

Any other wives here because they asked their husband to hang something plenty of times and they still haven’t done it so you’re taking matter into your own hands ✋Thanks for the simple video! Can’t wait to see the look on my husbands face when he comes home 🙂

Hi Eric! I don't tend to comment often, but I felt the need to express how grateful I am for your channel. I haven't had a father figure in my life, so these videos are the closest thing to knowing what that feels like :) Thank you for teaching me how to diy my home improvements and being so kind every single time

Your approach to a video like this is really spot on IMO. Helpful, informative, not dumbed down like you're informing a first grader, and not too advanced for beginners. Thank you.

MY DAD IS A BUSY PERSON WE DON'T REALLY TALK MUCH AND HE NEVER TECH ME HOW TO DO THINGS LIKE THIS.. ITS LIKE ,YOU ARE MY DAD AND TEACHING HOW TO DO THINGS !! I LOVE THIS VIDEO !!

Love the way he's not just doing but teaching at the same time

Fixing have changed incredibly over the years. As a young Electrical Apprentice my first experience was called a "Jumping Tool" which you hit with a hammer and turned it around. It was permitted to hit your fist ass well. But Masonary bits came along and saved my lefthand first finger knuckle. I liked the Lead anchour, I can imagine it moulding to the hole better than a plastic anchour. Not sure about the concrete ones though. Maybe in shear but I can see them pulling out on an axial load. Thank you.

Thanks, just what I needed to know. You have a bright, warm aura. 💥

Exactly what I was looking for! Thank you for explaining it in a very matter of fact way. 👍🏼

took a practical but daunting task for many and delivered it concise and fun. doggos always a +.

Thank you for taking your time to show us these tips. Appreciate the help!

Thanks for the video. I now have confidence drilling into a concrete wall 👍👍

I liked the explanations of why you’re doing this and that so you just earned yourself a subscriber! :)

Thank you very much for your great tutorial and light-hearted approach!

You are so informative and likeable! Thank you! Also, the dogs at the end of this video made my day. I run The Farm: Senior Dog Sanctuary, so these "helpers" are near and dear to my heart!

Thanks you kept it simple and your style of teaching is really great. GBY

This was a very good video. I assumed this was the way to do it with tapcons but this helps me know for sure. 👍

Great videos, Dude! Clear, concise. I especially love your assistants! 😍

Hell yeah. There really is a video for everything DIY these days

dude i like you, your personality is awesome. I subscribed just based on this one video lol. thank you sir. i will be coming o your channel to fix my mistakes hahaha

This was so helpful. I needed the bravery boost! Basement shelf for all the kids superhero toys!

Thank you for this video. You are encouraging. I keep making dumb mistakes.

Good job. Love your poochies!!❤️

Brilliant info thanks so much for a great video just what I'm looking for ...

I've found my new favorite channel!

I love this video. Bow i can mount a shelf in my room for my things.

Thanks so much for this video. It's exactly what I was looking for. I stupidly would not have used an eye shield or ear protection, and now I will. Can you tell me how to tell how far apart the brackets need to be for what weight? I'm not doing anything too heavy, mostly 1-gallon plastic plant pots with soil & plants, but I want to get as many on the shelf as possible.

The intro was so precise 😂😂

This is helpful, Thank you!

Great video! :)

Thanks I appreciate it 🤩I also have that same drill too👍

Great job. Thank you!

Love them Tapcon screws, hammer drills have become quite affordable Love the Amber Woofers you have, I be willing to baby sit them for a few days

well done, thank you

Cool. You can squirt some liquid nails into the hole to reinforce masonry (like old brick walls) when installing lead anchors. Personally, I love the tapcons.

Nice video. I learned from you

Very interested called them London bracks very good hammer drill best for job

Whenever I had trouble drilling masonry I just started will a smaller drill bit and gradually increased the size.

🤣🤣 yup, that's exactly what I was looking for. Thanks 👍

do you have one or can you do one on drilling ceramic or stoneware or clay? I have planters that come with no holes in the bottom and when I try to make the holes it is most difficult, may crack or it burns out the bit by the time I get 2 holes done out of 4 desired ... I know I used a special bit but cannot remember which it was not easy. thanx for all you share and the way you do so.

Thanks

I can't wait to spend the rest of the quarantine figuring out how to fix up my house! First-time homeowner question - my basement is 100-year-old clay tile, can I treat it the same way you do cinderblock? I want to put up a shelf in the laundry room. Every google search I have comes up cinderblock.

nice 😊

Cinder block and concrete block are not the same thing. Cinder block is made from coal ash (i.e. cinder) and Portland cement. It is not suitable for building foundation walls because it isn't very strong. You could easily make a gash in it by hitting it with a hammer, for example. If you dropped a cinder block, it would certainly break into several pieces. It was used for interior non load-bearing walls in industrial buildings. I remember an old strip mall basement where the foundation walls were made of poured concrete and the interior walls separating the individual store basements were made of cinder block - not concrete block. These interior walls were not load bearing. There were steel girders and columns that supported the floor above and the cinder block filled in the space between the columns to separate the individual store basements. The best way to mount anything on cinder block is with plastic anchors and screws. (Same as you would for sheet rock, although cinder block is much stronger that sheet rock.) You don't need a hammer drill, just a cheap masonry bit and a regular drill will easily make a hole. In fact, an ordinary high speed drill bit will also work, but it will wear out quickly. It's best not to hang anything too heavy on cinder block even if it seems to be securely fastened. It was a way of using an industrial by-product (coal ash) instead of discarding it, and it was very cheap to produce. I don't think that cinder block has been produced for many decades. Now, only concrete block is produced. Concrete block is made of concrete as the name suggests. (i.e. Fine aggregate, sand, and Portland cement.) It is MUCH, MUCH stronger than cinder block and is suitable for use in load bearing walls. You need a hammer drill and a good masonry bit to drill into it. If you go to a masonry supply yard and buy "cinder block", you can be sure that it's actually concrete block.

So wholesome

I watched this and hung a small shelf for my humidifier. Need to hang something else couldn’t remember how I did so, here I am again.

Beautiful dogs

What a nice person you are, Eric, to share your knowledge as you do. Thank you.

Just amazing ...straightway subscribed... Just that we don't get such quality screws n tools here in local shops easily. Will the below drill machine work on Cement Walls. Please advise. I am planning to keep some Tubs on a shelf in the balcony over L Brackets🙏🏻🙏🏻 "Bosch GSB 501 impact drill with Powerful 500W and a Lock-On button for continuous drilling makes it a great impact drill at construction sites."

Nice video, some masking or electrical tape around the masonry bit about 1/4" longee than the tapcon is an easy indicator also And it's not a big deal either way just a heads up, I believe you're saying may-son-ary and its a hard e sound like may-son-ree

Hello. May I ask what kind of bracket you used?

I was entertained and educated. An awsome combination for such a unglorious task. I am now a subscriber.

Wow that's a good one,,,but up here in kenya I haven't seen those blue screws for tha wall🤔

What kind of drill bit did you use?

what level did you set the clutch at when using the blue screws

you are adorable. I love your personality. As a female I appreciate your video and your sweetness. Thank you sir.

28 seconds in and I'm subscribed. I love your style and can't wait to start working my way through your videos! Good stuff 👍👍👍👍👍

Does it tell you which size bit is needed on the lag bolt box?

Interesting video. Do you not need wall plugs if your drilling into concrete or brick wall?. 🤔 thanks...

Can I use what I have (ordinary power drill)?

in my garage yes it beat up like that but id like to put a vise and some weight on it what works confused thank you

What shelf brackets did you use? Even the biggest (12x14) Everbilt ones from Home Depot say to use a #7 screw (5/32") so I'm figuring the holes will be too small for event the smallest (3/16") Tapcons. I have some brackets at home, too, and the holes are only 1/8". Someone please help.

Is a hammer drill the same as an impact drill?

Who are you and why am I just discovering your channel? Love the content. Also, would this be ideal way to hang floating shelves on cinder blocks? Any suggestions? Thanks!

I love you within the first 5 seconds

Are hammer drills unusual in the US? Where I'm from most of them have that function.

What size screw did you use? Because I just bought a bunch of the shelve support brackets and wow are those holes SMALL!

what model is that water pump? thanks for the great vid!

Wow, I didn't expect so much commentary on the "cinder" block bit. I didn't know the difference. In fact, if you say "CMU" around here, we think you mean a local university. Haha! When I was a kid, I remember my dad mounting some 2x4's to a block wall using a tool that he loaded a .22 bullet into before whacking it with a hammer. (I just Googled it...it's a ramset hammershot) Anyway, good video, Eric. :-)

How do you know how long your screws should be? There are a lot of different lengths. Some have threads all the way up the screw and some do not...??? p.s. Awesome video.Glad to have found your site!

Any extra thoughts on a cinder block wall that makes up my basement? Im concerned about moisture coming in since the outer side of the cinder blocks is under ground level.

Yes I do. This is great. I watched your other video on this, I bought the screws, I think I have a hammer drill but it’s battery driven.

hello i want to hang my floating desk i had in my old house, but my new house is made out of adobe. what can i use to make sure my desk dosnt fall down on me? plz help

Thanks dad.

Good video,but I just used my standard power drill and a concrete bit NOT A HAMMER DRILL, AND IT WORKED JUST FINE, only took about 15 mins for my goal.

Explain... "ROUNDED OUT??" Do i have to buy a hammmer drill or can i just use my drill like a hammer??

Is a hammer drill the same thing as an impact drill

can you use a tap screw?

I heard the term impact driver but i think you met hammer drill.

Wawww

Why do East Coast denizens call them “cinder” blocks? Out here on the left coast we call them CMU’s or concrete blocks. I had a vintage Milwaukee hammer drill for ages, in a metal carrying case. My repair guy lost it. I shoulda fixed it myself, like you did. My old Milwaukee Sawzall saw one too many outdoor winters 🥶 and was replaced with a late model saw, and n a plastic case 😵

WTH happened to your shield?

what if you have drywall in front of the coment

Perhaps

Sorry but doesn’t the long side of the bracket go against the wall?

OED's only evidence for drill-chuck is from 1874, in a dictionary by Edward H. Knight, patent lawyer and expert in mechanics.

Asking my husband to do anything around the house us like asking Joe Biden to stand up straight. So, Fed up I went out and bought myself .... a miter saw, a scroll saw, table saw, drill press, belt sander, orbital sander, and made myself a router table., now he us asking me, im self taught and loving it! LMAO. 😅😅😅😅

masonary (missionary)

Cinder block? cement blocks?

I never could justify buying a hammer drill when you can save a little more money and buy a much more versatile rotary hammer.

Masonry - it’s pronounced /mā′sən-rē/

It's *concrete* block; cement is merely an ingredient.

pretty poor video: 1. no mention of drill bit size 2. no mention of the wall plug size watch the British diy videos. generally better.

WHY CAN I USE A REGULAR DRILL WITH THE CEMENT BIT ???