You Might Hate The Reason We're Building This Dump Bed.

Подписаться 616 тыс.

Просмотров 472 тыс.

50% 1

#fabrats #fabrication #diy
Today we're helping out our nephew with his truck. We're putting a dump bed on it, to make his job a whole lot easier. Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
We LOVE Onx Off-Road! Get 20% by using code FABRATS-20 or click on this link:
webmap.onxmaps...
Get your own Fab Rat's Apparel Here:
www.thefabrats...
More Videos You'll Love:
Some Big Improvements Are Happening at Fab Rats!
• Some Big Improvements ...
THIS might be the FUNNIEST Oil Change on the Internet!!!
• THIS might be the FUNN...
We're Definitely Not In UTAH Anymore! What Did We Get Ourselves INTO?!
• We're Definitely Not I...
We Found A Nasty Surprise In The Seats Of The Firebird Barn Find.
• We Found A Nasty Surpr...
We love Barnes 4x4. Check them out!
www.barnes4wd....
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/pro...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: thefabrats@gmail.com
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729

Авто/Мото

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 819

@donwilliams3626 Год назад

It appears any kit that comes into Paul's shop is a universal fit. His first step is always to throw out the instruction book!

@danielstevens3372 Год назад

Instructions are for Firestarters hahaha 😆

@dakotadeary5285 Год назад

That's so true he is so handy at what he does

@dakotadeary5285 Год назад

@@danielstevens3372 true he love to burn the instructions

@ihdieselman Год назад

And proceed to screw it up and take longer to figure out that he's doing it wrong then it would take to briefly read the instructions in the first place.

@wesman7837 Год назад

Well instructions for the wrong truck aren't going to be very useful!

@dkhallal Год назад

Paul never ceases to amaze at his off the cuff “ratgineering”! Nice job, that would be a fun/handy truck to have around. I was surprised how much weight it could dump.

@DustyEmma Год назад

“ratgineering” looool, THAT should be on some T shirts....

@lylehuber1466 Год назад

While I like ratgineering, I think Ratrofit is just a little better.

@dkhallal Год назад

@@lylehuber1466 🤪

@tonydowd8566 Год назад

Im surprised people even question your fab work. You're always explaining how thing's are going to work, and they always do.

@kimetherington2252 Год назад

Never doubt that a master fabricator can marry a international bed to a Ford truck to a Chevy lift and make it work on the fly! Paul you are a master. and along with your brother Ben, the challenges Fab Rats sees on a daily basis will be met and conquered! Any company would love to have Fab Rats on their team! Thank you all for your sharing, thank you Michelle for your expert editing! I can hardly wait to see what comes next...

@michaelc.3812 Год назад

Don’t forget to add a safety bar so your cousin can have the safety feature that will save his life.

@pablomaslykin9614 Год назад

Nice work Paul and Ben, as a safety tip, you can weld some sort of grille on the roll bar to prevent things from sliding into the rear cab window, just a suggestion. Great video keep up the good work God bless and stay safe

@markellyfarm Год назад

I was screaming at the TV, "nooooo don't weld that!" Lol. The frame you had going forward actually goes underneath the lift to hold it up at rest. You put the lift in place and let the bed all the way down before connecting so the lift rests properly. Did a lot of these back in the day including a pto wet kit.

@hanssundkvist Год назад

xactly! ...

@markellyfarm Год назад

@Jim Omega yup sorry. But now that I think about it not being a right angle, it would be Sines. Back in the day we just made chalk lines on the ground and measured it.

@jeepscotsman6242 Год назад

Just me or did they loose some of the lift height capabilities of it?

@markellyfarm Год назад

@@jeepscotsman6242 its possible if it was mounted too far forward.

@FinishedProject Год назад

Am I the only one with rusted wheel arches drooling at the condition of that pickup truck bed that they took off

@ryurc3033 Год назад

Man my parents ran a greenhouse from 96 to about 2003ish I unloaded alot of manure with a shovel in the first couple years, and a dump bed in our old dually was a life changer. Not a bad idea to keep your local butcher happy. I bet it leads to a few tasty meals.

@russellsmith3825 Год назад

Combined with an ample supply of wood chips, those guts could make good compost

@adamthomas4638 Год назад

Grandma lolley is a saint always making sure her little boys are fed and even gives insight on projects but we do know who the favorite is he's just a little shorter than the other one of the best things about this channel is how its a family operation glad y'all work together an don't let BS get in the way

@pmae9010 Год назад

Nice work Paul and Ben, that truck is going to get a lot of use for all kinds of things.

@lockdoc600 Год назад

I cringed every time one of you walked by that knee knocker on the back of that truck! Too many knots on my legs and knees from those things. I was surprised it didn't get removed before you started on that truck!

@detroitdiy Год назад

Great job guys, definitely enough issues to have to work through, however like always you guys have it working awsome.

@georgehampton7579 Год назад

We have a highway that runs through our town with three or four stop lights. We had an overloaded gut truck lose a bit of its load every time it took off from a stoplight. A little stomach here, a little intestine there, even a few skull bits. It was the crime of the century in our town, according to some of the easier offended.

@psg6314 Год назад

My son in law does same thing for the deer cooler, he bought a f 350 diesel I put a water tank on the head board and weirded a electric pump for rinsing, great video keep up the good work God bless from GA stay safe

@markreetz1001 Год назад

It's a winner! Making dump beds always looks so complicated to me. Good job. Good to see Papa Darr hanging with you!! I know he comes around often enough, but I just wanted to give him a shout out!!

@charlesjohnson5579 Год назад

Am I wrong or did you forget all about the fifth wheel hitch? That is the part I really wanted to see how you went about that.

@GrayRaceCat Год назад

It didn't work out because the ram had to live where the hitch would have been, and the bed isn't strong enough on its own.

@blackbuttecruizr Год назад

The only thing it needs is some back up lights and maybe some work lights on the headache rack. Great work!!!

@jasonswift7098 Год назад

Good idea and reverse camera.

@woodcox0171 Год назад

Also needs amber side marker lights on the rear.

@Farm_fab Год назад

It's been awhile since I've worked on a Fordolet. My dad put a Chevy 307 and automatic transmission in a Dodge van, and he liked the fuel mileage. That was a Dodgolet or a franken van.

@phillmckrakin2518 Год назад

That old bed is worth some coin here in Michigan. I have seen them bring $2500 for a clean rust free bed.

@1701enter Год назад

Did you put on a permanent safety bar like the one you used to build it? I recommend you do this and put it on the same side as the motor so no excuse not to use it when servicing the truck ... This is my go-to U-Tube channel it is so much fun to watch! thank you (also I hope that is not a "welders" cough? that needs to be looked into if it is)

@yellowstonefoster5543 Год назад

Your families continued ability to make me feel like I am just hanging out with my family and close friends with every video is unsurpassed. I feel at home every time I press play. Thanks to you and yours for this consistently amazing content.

@willbeam8416 Год назад

I thought my family was the only ones that used Christmas vacation quotes year round. You guys are the gift that keeps on giving.. the whole year.....

@CurtisS392 Год назад

Good morning and happy Friday Fabrats!

@loganvelez7676 Год назад

It actually really looks like it was made for that truck. Great job guys. 😊

@Bo_Spurlock Год назад

@fabrats bro....i watch all your vids religiously. Constantly amazed by how talented you are. Not saying best I've ever seen type guy but damn close given the stuff your working with. Seem like a guy that if I lived close I'd be in garage working with you daily to cure boredom. Retired military so lots of time. I've got a old millermatic 220 I got wired in finally and about to see if she'll weld. If so great things ahead. Love the vids amd family. Thanks for sharing.

@RonSales Год назад

Now take the bed you took off and build a tow behind trailer to go camping with.

@tn65s Год назад

Build rugged hinges and make a lock for front of body. I hauled 12' dia.x 36' fiberglass tanks out of Canada to Maine and New York, 12 of them.

@jayroberts636 Год назад

And how does a Friday get any better Fab Rays video that’s how!!

@chrisnaaa3378 Год назад

woohoo. even better i just found of from this comment that it is friday. thanks man. i thought it was thursday. lol

@danajorgensen1358 Год назад

I don't hate the reason for doing the bed... I just think there is potentially a lot more your nephew can do to make better use of the carcasses... Like boiling the bones down to broth (and maybe dehydrating that into bullion), stripping the remaining flesh from them, then crushing them into bone meal fertilizer. Processed deer hide becomes buckskin leather, etc. The need for a "gut wagon" just indicates he has yet to fully explore making a potentially much more complete use of the animals.

@davebenson1504 Год назад

amazing mixing of the non compatible parts to build a POWERFUL lift... success

@billunderwood5453 Год назад

I like the looks of those Juniper (cedar?) logs. If you're looking for content for your oldest to start his own channel, how about building a sawmill and slabbing some logs?

@harrellmorlan6817 Год назад

I think I'd put a small apron on the back of the bad if not his license tag and everything in between will be covered in blood and guts. IMHO lol. Love the vids great job as always.

@Ray69Smith Год назад

The hinges or bolts used for hinges are not going to last very long ! It should be cold rolled round bar at best 1 3/4" for longevity !! 🤔👍👍🍺🍺

@scubasteve7946 Год назад

Yep, double shear also. Great quick work though. It would take me 6 months because I would try to make it too polished at each step.

@dawabbitt3079 Год назад

People out here lack the ability to foresee more than 1 potential issue at a time.

@tyendor1952 Год назад

@@dawabbitt3079 Yep, but that makes for a future episode where they they can go rescue and then repair it.

@kurtniles8642 Год назад

The ‘HI YAH’ made me think of Randal. He may be gone but not forgotten. How’s he doing? Has he stopped by? If he does I sure hope you get him to make a cameo.

@calholli Год назад

You could still mount a Gooseneck ball/ 5th wheel hitch if you just weld on some flanges on the front of your bed so that you can pin the bed shut.. He would have to pull the pins to dump it; But normally you would just leave the pins out, and then only put them in when you needed to tow. At least that way it would secure your bed for towing when you needed it to. I think it could be done fairly easily.

@jasonswift7098 Год назад

You don't install a goose-neck hitch on a dump bed! it just does not work.

@4wdtennessee459 Год назад

I had a 91 f450 dump truck that was that way with the pins in front of bed. Little annoying taking the pins in and out but it made the bed solid. I would tow a 12k backhoe with it and never had a single problem with it.

@davidtimm4382 Год назад

I wanna learn the "blink and sides are on" trick. That was just amazing. =)

@ttigger74 Год назад

Project Yellow Submarine??? Please tell me you are using your wrecker to dump Matt's wrecker in the lake, lol.

@jamesv5343 Год назад

@13:11, you said that if you welded the whole thing in, it would probably break the frame in half. What do you mean by this? Is the heat from welding weakening the steel?

@brianmiller1098 Год назад

I'm willing to bet their aren't enough Vegan fans that your subs will drop noticeably. Just sayin!

@donwright8278 Год назад

I hope you are already aware of this but there is a scam operating on your channel called Text me a text and they are using your official rat rod character ( the little rat rod drawing they messaged me and thanked me for my comment and said I won a prize and asked me to DM them to claim my prize ( I didn't ) but I did check them out and there track record is long I'm just letting you guys know no worries on my end I just don't like anyone's name to be sullied (go get em guys )

@daviemaclean61 Год назад

I just looked for an abattoir/gooseneck mobile home vehicle and, strangely, nothing came up on my search! ;-)

@DeanJohnson67 Год назад

with the value of the dollar the Barter system is much preferred!

@johnbrill1971 Год назад

Some how RU-vid removed my subscription for you guys but I hope this time it stays and I get my notifications

@theusconstitution1776 Год назад

I’m still amazed how you have 1520 year old trucks with no rust on them like showroom condition all there would be left in New Hampshire of that truck would be everything that’s plastic the rest of it would be a red pile in the middle of it God I wish I could I’d love to come out there and just buy some old cars

@TheBlueBikeDoyle Год назад

Hum looks like your firewood truck could us dump bed . Oh wait you got kids to unload it never mind

@alexduke5402 Год назад

Heck yeah nothing like a good trade with the butcher! Most of them are a good friends to have!

@stephenpoe2037 Год назад

Very interesting Adaption of Miss Match Parts ! Great Video. Thanks for sharing !

@waynefields4813 Год назад

I can see the wood truck getting a scissor upgrade

@johnnys.7209 Год назад

Great show. Have you ever had drive through pizza. Johnny Cool

@oldk4tz Год назад

everyone need a mini-x would have been good if he could return the dump kit and get one for the ferd but this came out great

@carstengrove6214 Год назад

Are you ever worried about sparks next to the gas tank?

@tiredagain6722 Год назад

You just need 2 mismatched mud flaps and a got milk bumper sticker to make it a farm truck!

@dawabbitt3079 Год назад

Mud flaps? What's a "mud flap"? ~ Oh!? You mean those things I bitched and moaned and cried about having to put on my truck for the last 20 years - - - until I finally bought a toy-hauler and realized that there IS a lotta shit spraying out of my oversized M/T tires, that could really damage something!?

@matttriglia5 Год назад

Hey what are you guys doing with that bad ya just took off I’m interested in it.

@cleanmachine08 Год назад

That bed is just offal.

@cmwhitt18 Год назад

Dude it's gotta haul cattle guts and bones and hides and other animal remains, why would you want a nice and new bed to haul that nasty shit around.

@saginawdan Год назад

Offal: the entrails and internal organs of an animal used as food.

@cmwhitt18 Год назад

No they go to the dump not for human consumption

@stevehaken Год назад

Really enjoy watching Paul and Ben work together. Great team!

@cmwhitt18 Год назад

PAUL looks like you need a dump lift on your wood hauler saves your back trust me its worth its weight in gold if ya get outta bed just a little bit easier the next morning

@norcoredneck Год назад

Glendale Gut Wagon. Kinda has a ring to it.

@leroyll1144 Год назад

PAUL, why dont you make up a set of fork extensions???

@michaeltablet8577 Год назад

I need you to make me a dump bed for my bedroom that dumps me out of bed when the alarm goes off. Great video as always!

@danielstevens3372 Год назад

Hoping the yellow submarine is the jeepster project 💛

@thomasdesmond2248 Год назад

So JD and Darr are the B team. You're in trouble. Lol God bless

@CarswithNash Год назад

Looks like a frustrating little project but you got it done.👍

@davidbabcock5172 Год назад

The piece you but in front as a brace looks like a supporting bracket that would go under the unit. That way you could take the cylinder out to repair it. Should have used the pickups bed to keep guts some falling off the sides.

@eformance Год назад

I looked at Ben's bent up trailer and this thought popped into my head: When life gives you poop, make a poopsicle!

@1950justin Год назад

Don't forget mud flaps!

@life_ontheranch Год назад

My understanding the base you’re putting in front of it actually supposed to go underneath and it’s supposed to be a complete scissor so you get the double the lift.

@troycurrie7784 Год назад

Why not just make the original bed able to dump? Seems like having taller sides would be beneficial for hauling butcher scraps.

@jeromeknasinski3862 Год назад

What a joy to have a well equipped shop and outstanding assistants.

@bones3826 Год назад

That's some really good stuff good job but I would like to see you wear safety glasses more often

@geriatricginger Год назад

I installed a Pierce onto a 2015 F250 fro my father-in-law. The 'bolt-on' kit was not a bolt-on, by any means. Also, the Ford bed would flex badly (floor bulge) due to the POS aluminum construction of Ford. So we had to basically build a skeleton underneath the bed to support it. Otherwise, the pierce frame would've pushed right through the floor, first load it tried to lift. The rear bumper was also iffy, from a safety standpoint, once the kit was installed.

@AttwoodsGarage Год назад

Around here on a truck that old you wouldn't even need to unbolt it first. Mad jealous that there's still bedsides on it.

@marvincarter870 Год назад

Paul and Ben does it again making this dump bed for his buddy. Works great. Good to see Papa Dar and Grandma Lally bringing the boys lunch! Love this channel!

@280zone Год назад

Thanks for fitting the whole project into one video!

@DaffyDuc69 Год назад

We're going to do some sketchy sh*t.. lol

@johnpickens448 Год назад

The lack of rust on these Western trucks is amazing! This same truck kept outdoors in New Jersey would have dissolved in a pile of corrosion years ago.

@jasonwtheis5921 Год назад

Fun one to watch! I appreciated the part where Paul added the square tube support saying, "I don't want to die today." A well-known local heavy equipment operator died about ten years ago when the hydraulics on his dump truck failed while he was working under there. That was quite tragic. After Paul's project was finished, I couldn't help but feel like there needed to be either fenders attached to the flatbed or some sort of protection built around the hydraulic pump and reservoir. It's looking awfully exposed under there!

@douglasmcgowan2372 Год назад

Ya put some kinda frame cross member back in?

@richt1907 Год назад

Dam what leaf 🍃 springs u have in that. Shit

@VanFlicke Год назад

Love the background music! And love the work on a Ford finally! :)

@rodneyblackley5573 Год назад

Technicak Term; Offal Wagon.

@californiadaze Год назад

Paul & Ben are the ultimate problem solvers!

@wildkev1010 Год назад

Can't wait to watch the cheap truck challenge !

@mannybarroga1878 Год назад

Dump bed is very useful, build variety is not only entertaining but is informative. Very nicely done thanks.

@AwabDandy 17 дней назад

Thanks for the breakdown! Just a quick off-topic question: I have a SafePal wallet with USDT, and I have the seed phrase. (air carpet target dish off jeans toilet sweet piano spoil fruit essay). How can I transfer them to Binance?

@chiefvilla3167 Год назад

Good job. You forgot the fifth wheel hitch . And I thought you supposed to be Sema🤷🏽‍♂️🙋🏽‍♂️😊😎.

@coleslaw110 Год назад

I thought Ed's Golden Nugget was the yellow submarine. Excited to see what ya'll have planned.

@MC-re2ry Год назад

Nice job Fab Rats. The geometry on those dump beds ain't easy.

@cjplol6589 Год назад

Gut wagon, a perfect job for a Ferd.

@calholli Год назад

Now we just need a trailer burnout

@TheBibliofilus Год назад

I was screaming at the screen when he first started welding on the hinge mechanism, "It's a double hinge lift-kit!"

@SkiRiverRun Год назад

I was trying to understand what he was doing at first, but he figured out. Would have saved some time reading the instructions beforehand to understand how the lift-kit worked.

@littlearsehole75 Год назад

"Dumping guts" is what I do halfway through my first cup of coffee in the morning.

@1950justin Год назад

Very impressive, Rats!

@kennyking6325 Год назад

Friends, Yep I have wanted two things, which one stops the second or vise versa. Nice hydraulic unit! Super excited to see the suburban build, because I have a suburban too!

@onefootfighter22 Год назад

I never saw a tape measure. I really like the way it came out! Nice job 👏

@stefanf922 Год назад

The lifty thing connected to the angle thing, they say husbands and wives start talking and thinking the same after years. Can't imagine where they got that idea. 🙂

@1970scout800 Год назад

@MrPhatkatz Год назад

Man I just barely got in the top 100 on the like button, but another great video guys from the number one RU-vid channel in the world... 👍👍👍

@shaunrobertson9203 Год назад

15:15 into the video... PERFECT Christmas Vacation reference 👊👊...your pappy would be proud of everything you have become and continue to be..

@schstv Год назад

Truck jumping, just a casual remark, 1:42 ,“…jumped that old girl, a lot..” I would love to know the genesis of this “sport”, I can hear Paul, “Wouldn’t it be cool to jump this truck? Kinda like Dukes of Hazard? Just finding a suitable spot and then making the first attempt, I’m sure there was not much JSA going on. Amazed how well it jumped, apparently able to survive multiple flights. Perhaps the most amazing was the foresight to get it on video. This would be an excellent “back in the day” side video story with Paul and Co. filling in the details.

@professornuke7562 Год назад

"I can see some problems, how about you? ...(phone rings).....Robby Layton." Most RU-vid moment since 'Life of Boris' accused his cat of destroying the Christmas Tree a couple of years back.