Тёмный

YOU'RE NOT USING ENOUGH SURFACE! 

BrunsNick
Подписаться 21 тыс.
Просмотров 23 тыс.
50% 1

Everyone talks about the importance of surface, but how many of you are using the right amount of surface? Most people may hit their ball with a 5 year old 2000 grit pad that has been sitting in their bag and call it a day. I'm here to tell you that you're probably not using enough surface!
🚨🚨🚨BRAND NEW BRUNSNICK MERCH!🚨🚨🚨
I have collaborated with Inside Bowling to design some t-shirts and here they are! Sport some OG BrunsNick gear, check out the link!
www.insidebowling.com/collect...
With the help of SPECTO data, it'll help tell the story about reaction shape, overall hook and continuation through the pins. Here are the SPECTO data points used and definition of each term:
Launch Speed - Speed measured off the hand.
Entry Speed - Speed measured at the pins. (What you'd see on your home center MPH screens)
Rev Rate - Revolutions Per Minute (RPM)
Launch Angle - The angle the ball traveled the first 10 feet.
Break Point Position - Board at which the ball was at its outermost position.
Total Hook - Total number of boards the ball crosses on the way to the pins.
Hook Power - Number of boards the ball hooked based from the True Breakpoint.
Entry Angle - The angle of the ball between 51 and 55 feet.
Impact Angle - The angle of the ball between 57 and 59.5 feet.
Pin Deck Exit - Ball position at the end of the pin deck.
Questions? Comments? Did you order one after seeing this video? Let me know! I read all the comments and respond to many!
#Bowling #BowlingTips #BrunsNick

Спорт

Опубликовано:

 

6 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 187   
@jameslawrence5902
@jameslawrence5902 9 дней назад
This is why your channel rocks.
@gordon3576
@gordon3576 9 дней назад
Sanded my BW 3.0 and scored my highest game ever. It truly works!
@jerrypinotti4792
@jerrypinotti4792 9 дней назад
I just started getting coaching. The very first lesson I had my coach took my ball and added surface.
@squidly2112
@squidly2112 9 дней назад
I don't play with my surface nearly enough. I do re-surface my bowling balls occasionally, back to box finish, but I really need to better learn how to adjust the surface during play. Perhaps I need to spend a couple of practice sessions playing around with surface so I can get a feel how to dial in my ball reaction. This is a GREAT video! .. Thanks Nick !!!
@brunsnick
@brunsnick 8 дней назад
Couldn’t hurt to see!
@davidtaranto9084
@davidtaranto9084 9 дней назад
I’m bowling a sport singles league. Had results plus with 1000 160 180. Switched a black widow domination at 500 went 237 246. Surface is important.
@ObjectiveEthics
@ObjectiveEthics 9 дней назад
Best bowling channel on youtube
@brunsnick
@brunsnick 9 дней назад
Thank you!
@avos5
@avos5 9 дней назад
Immediate send to my league teammates who are afraid to come near a ball with a pad
@darylgould8923
@darylgould8923 9 дней назад
Fantastic video.. learnt a lot . Thank you.
@JSBowling2011
@JSBowling2011 9 дней назад
Great job Nick!!
@garyloomis4961
@garyloomis4961 7 дней назад
That's some great information nick , thank you bro for your video...
@hammertime6066
@hammertime6066 9 дней назад
😊😮WOW THIS WAS GREAT 👍 AWESOME VIDEO YOUR THE MAN TY SO MUCH FOR HELPING US WITH THIS
@brunsnick
@brunsnick 8 дней назад
Glad to help!
@Caddrel
@Caddrel 6 дней назад
You made this video at the exact perfect time for me! I'm a beginner with a Hustle that has a lot of lane shine on it now after 40-50 games, going to hit it with pads tomorrow!
@BigB_62
@BigB_62 9 дней назад
So once you've changed surface and have the ball dialed in, how long will that new surface last? How many games?
@brunsnick
@brunsnick 9 дней назад
Depends how dull and what kind of ball, but in this scenario, it’ll be good for a few games at least. I don’t need it to last all tournament usually, just enough to get me through the first game or two until I can move in and play with the friction I helped create.
@commentary1
@commentary1 2 дня назад
Thank you for the breakdown! This is super informative and you broke it down perfectly!
@edisonnarvaez8388
@edisonnarvaez8388 8 дней назад
Thank you, lots of good information. I'm always afraid of using surface, thanks
@dongarnerjr.1055
@dongarnerjr.1055 8 дней назад
Thanks all of your tips and reviews has helped me to improve my game!!!!
@brunsnick
@brunsnick 8 дней назад
You’re welcome 👍🏻
@dd101dd4
@dd101dd4 9 дней назад
Thanks for this! I add surface a lot as I like to play straight and keep it in front of me. My game is weak when hooking it. So I do my best to keep all my equipment fresh before league night.
@paulmaffeo2835
@paulmaffeo2835 9 дней назад
Good video.Learned something from it.
@remington1439
@remington1439 9 дней назад
What a great clinic 12:19 that last shot from 15 to 4 was great. I always carry my pads as Nick said.
@petermilder1912
@petermilder1912 9 дней назад
Nick, or should I say King of the 8 Pin, great video about surface. I know I don't use it nearly enough although I'm getting better. This video just encourages me keep adjusting it to help shape a shot I'm comfortable playing.
@CaponeSlays
@CaponeSlays 9 дней назад
Wow this video is perfect. This was my exact problem lol
@larrylacroix3944
@larrylacroix3944 9 дней назад
Very good video. Interesting
@brunsnick
@brunsnick 9 дней назад
Thanks Larry! Hope it helps!
@b.r.fowler785
@b.r.fowler785 9 дней назад
14:00 Best part of any BrunsNick video. 😂🤣
@brunsnick
@brunsnick 9 дней назад
I was so in the moment too, still rears its ugly head 😂
@neilfrank2198
@neilfrank2198 9 дней назад
Thanks Nick . I've been thinking a lot about this topic with my Hazmat . . I think I will drop it to 1500 just to see what happens
@kingsley220
@kingsley220 9 дней назад
Greetings from Thailand. Speed dominant and been using lots of surface here too. Quick solution to f...ed up oil machines at my center and sport patterns at tournaments.
@user-zn2pr4ul8h
@user-zn2pr4ul8h 9 дней назад
After the 2nd game out the box, i hit my Arctic Vibe with 2000 grit, didn't notice much... until I stopped after game 4, thanked my PSO and went home, woke up the next day, and went bowling at my home center, 1st game on their house shot? 299. Guess my inner sanding demon knew something to hit that thing with 2000 after just 2 games with it. I'll add another quick sanding story real quick, my very first tournament that we planned for, my coach and I agreed to hit my reality with 500... and I still had to play dead up 8 throwing it 60%, college shots are NO JOKE.
@quietguy5468
@quietguy5468 9 дней назад
Of course you have to do this before or during warmups in competition.
@brunsnick
@brunsnick 9 дней назад
Correct.
@doglover74651
@doglover74651 6 дней назад
Hands down your best video of 2024!!
@tortoisenight2078
@tortoisenight2078 9 дней назад
"No, no, maybe BrunsNick's right, maybe I'm NOT using enough surface" 🤔🤔 - Me with my 1000 grit Purple Hammer
@brunsnick
@brunsnick 9 дней назад
MORRRREEEEEE 😎😂
@michaeljamrozy4299
@michaeljamrozy4299 9 дней назад
"Those are rookie numbers..."-Matthew McConaughey
@aznmusicman4999
@aznmusicman4999 9 дней назад
Honestly might be taking mine to 500 for nationals tomorrow
@HollowFaith666
@HollowFaith666 9 дней назад
He is right it should be 500
@alexanderjacksonbowling300
@alexanderjacksonbowling300 9 дней назад
I use 500 on my Incognito😂
@jpoconnell999
@jpoconnell999 9 дней назад
I have the Brutal Collision with the box surface. It either sails or is the sharpest thing I've ever thrown, so I'll probably gonna hit it with 2000 here pretty soon.
@frisbeefrolf
@frisbeefrolf 5 часов назад
Cannot wait for a Vaporize video, man! Maybe you can compare it with the Theorem, Beyond, or Effect?? Super excited to see that one!
@Breaking_bogey
@Breaking_bogey 9 дней назад
I usually keep most of my solids at 1500. Pearls I knock the shine off with 2000.
@glajah6380
@glajah6380 9 дней назад
Thank you very much for the info! How many times can a surfacing pad be used? I am new and don't know but I will be using this forever more!
@brunsnick
@brunsnick 9 дней назад
With SiaAir, pads will last anywhere between 10-30 uses before degrading
@sriley064
@sriley064 9 дней назад
Yeah i hit my proton with surface the other night,burnt up instantly and i didn't know until i pulled out a shiny,it barely hooked
@matthewberwald1691
@matthewberwald1691 9 дней назад
Pearls I knock the shine off of, nice 3k then 4k pad. Solids I usually set to 3k, and one at 2k just in case unless I know what I'm bowling on
@turtled361
@turtled361 9 дней назад
Something I've been experimenting with lately is how I layer my surface. Going down to 3k is very different from going up to 3k.
@brunsnick
@brunsnick 8 дней назад
Yes, much difference, usually needs a spinner to do properly. Too much elbow grease needed
@StephRenee812
@StephRenee812 9 дней назад
What a game-changer...
@azmicrodtdude
@azmicrodtdude 8 дней назад
I keep all of my solids at 1,000 and urethanes 360 or lower. I bowl league at a bowlero so if i use it have have to clean it and then a ride on the ball spinner to truly clean it. Im like you and have a ball speed from 16-18 normally. Great video!
@willieyoung7070
@willieyoung7070 9 дней назад
I’ve recently begun to experiment with surface and it’s definitely a game changer. I took my purple hammer down to 500 and I definitely had to bring it back up ASAP. I am more rev than speed, and my purple hammer took off. I also brought my Hazmat Hybrid down to a 1000 and I actually somewhat like how it turned out. I am still playing with it, but that is an area where I can see myself leaving my Hazmat Hybrid at. I am curious about my other two balls, which are the Nu blue and the Black widow 2.0. So if anyone in the comments have experience with changing the surface on those two balls, please feel free to let me know. Another great video like always Nick 👊👊👊
@brunsnick
@brunsnick 9 дней назад
Thanks Willie! Keep experimenting!
@andrewweltlich9065
@andrewweltlich9065 9 дней назад
For me, Black Widow 2.0 is best at 2000 grit
@willieyoung7070
@willieyoung7070 9 дней назад
@@andrewweltlich9065 I was actually thinking about that! I am going to try it, appreciate it
@douglasbuck8986
@douglasbuck8986 9 дней назад
BW 2.0 ...... 1800 grit ........followed by CTD P5000D .........
@lockedonlaw
@lockedonlaw 9 дней назад
And, there's the issue. If you use too much surface on the ball, you're screwed. You can't fix it mid-game.
@derekrojoharrington9445
@derekrojoharrington9445 6 дней назад
Great video as usual Nick, thanks. Going on the opposite direction. If I am constantly overhooking and going brooklyn on a 2k grit surface: Should i resurface up to 3k or 4k to allow the ball to travel a bit more? Found myself opening the angle way too much standing on 42 and crossing the entire lane to get the ball to slow down and get into the pocket. Thanks!
@brunsnick
@brunsnick 5 дней назад
Yes, or even go shiny.
@TrandafirRuby
@TrandafirRuby 9 дней назад
I carry 500, 1000, 2000. I have to carry around 3 to 5 500 grit pads cuz of all the sport and challenge shots multiple times a week. Tomato ball and black hammer shine up quick xwx
@duncanakana7865
@duncanakana7865 8 дней назад
Great learning video. So how long does the change in surface last? 3 games? 9 games? and to reverse the process? I assume polishing or take it to your pro shop?
@brunsnick
@brunsnick 8 дней назад
Depends how dull you go really but yes, should get you through the games you need. And yes, to go back up to polish or compound correctly will require a spinner. Hard to do by hand.
@ThatCuddlesGuy
@ThatCuddlesGuy 9 дней назад
Here’s a big debate I have with a lot of other bowlers.. I always dry sand my ball, no matter the surface I put I always do it dry.. a lot of other people will use ball cleaner on the pad and then surface.. do you think this really makes a difference wet or dry?? I feel dry gives it a true surface and gives it more teeth
@brunsnick
@brunsnick 9 дней назад
If on a spinner, use water. If by hand, dry.
@surfboardshack3327
@surfboardshack3327 9 дней назад
Adding water on the pad and doing it by hand increases the grit. i.e. 2k pad will turn into a 3k pad.
@drakebarefoot5213
@drakebarefoot5213 4 дня назад
I am total opposite...my problem is always too strong. I am REV dominant and have issues getting enough down lane carry through the breakpoint. Always wind up playing 40 board or even throwing over the left gutter.
@EddieEhret
@EddieEhret 4 дня назад
I bought the harsh reality like 5 weeks ago and it came out of the box with a 2000 surface on it and i only bowl league 1 night a week but the day before i hit it with a 2000 abralon pad the night before and ive avgd around roughly 650 since from around 195 avg. I know u only do brunswick but besides all that having that 2000 abralon surface has changed my game quite a bit. ( knock on wood). Hopefully i can keep that up remainder of the season.
@kevinscarborough9982
@kevinscarborough9982 9 дней назад
I've never used abralon pads before. I get nervous about not doing right and not getting all the surface properly.
@JamesCFelty3
@JamesCFelty3 9 дней назад
I always try out of box first then adjust the surface to my preference.
@brunsnick
@brunsnick 9 дней назад
@@JamesCFelty3 perfect 👍🏻
@JamesCFelty3
@JamesCFelty3 9 дней назад
@@brunsnick works like a charm.
@elr2141979
@elr2141979 7 дней назад
Adding surface to your ball can be like a double-edged sword. This video leaves out a couple of key situations. 1. in most Leagues you only have 10 minutes of warm-ups typically with more than one player on the lane. 2. This means what he's demonstrating is completely unrealistic. Because when other players start throwing the ball it creates a little track area on the lane. 3. the biggest problem with changing surface on your bowling ball once you start competition you cannot alter the ball. If you're bowling in sanction competition* This means in games 2 and 3 when the front part of lanes go away That ball you surfaced is only good for one game. What will eventually happen is your ball will start to use a too much of its energy in the front part of Lane and deflect because there's not enough oil on the lane. I know this is a long comment but I usually leave my bowling balls out of box finish 😊
@brunsnick
@brunsnick 7 дней назад
@@elr2141979 assuming you only have 1 ball, but almost all advanced players have an arsenal they use. In a league situation, it’s completely realistic to touch up a ball in practice to match the conditions you’re seeing that day. Even if you only use the duller ball for a game, it’s better to match up right out of the gate of grinding out shots until it comes to you.
@elr2141979
@elr2141979 5 дней назад
@@brunsnick keep in mind that most League bowlers have a arsenal of bowling balls.
@AceInTheHole900
@AceInTheHole900 8 дней назад
A 2000 and 3000 pad are my best friends most of the time. When bowling on lots of volume, my 1000 pad gets used, and I always hammer my urethane with 500 before each use
@MikeyBrosas
@MikeyBrosas 6 дней назад
Can you do a review with these new strong sum solids. GB5 vs Hazmat Solid vs Idol
@brunsnick
@brunsnick 6 дней назад
I have done Hazmat and GB5. They’re on my channel. 👍🏻
@robertvanepps7779
@robertvanepps7779 8 дней назад
If a lane is burnt, can you adjust surface to get ball through the heads easier?
@brunsnick
@brunsnick 8 дней назад
Not as easily, no. You’ll need to a spinner to polish or bring to a smoother finish. This is why your dry lane ball shouldn’t be dull to begin with.
@traviskirk3834
@traviskirk3834 9 дней назад
I carry my trucut pads from 80 to p5000d and the purple wow factor and the polish kit for by hand the ball will be at 6000 grit
@michaeljamrozy4299
@michaeljamrozy4299 9 дней назад
@@traviskirk3834 80!!!
@matthewglaze5398
@matthewglaze5398 7 дней назад
Sanded my 20 year old storm xfactor duece with 400 grit sand paper. that shit hooks great now.
@chiappettamark
@chiappettamark 8 дней назад
Our house went short oil this Summer, sooo 2000+, even 3000-5000 may be the deal.
@staceyroberts3207
@staceyroberts3207 5 дней назад
Hey, Brunsnick! I have an off subject question, but going back to to your review of the Dark Web and building a Hammer arsenal...would you still recommend getting the Dark Web or just go with a newer and better ball instead? Thanks
@brunsnick
@brunsnick 5 дней назад
If they’re still available sure! Great ball to control patterns on fresh.
@Jordankons123
@Jordankons123 8 дней назад
Does sand paper work the same for my bowling ball?
@brunsnick
@brunsnick 8 дней назад
Yes
@dons2470
@dons2470 8 дней назад
Do you recommend a certain brand of pads?
@brunsnick
@brunsnick 8 дней назад
Siaair
@dons2470
@dons2470 8 дней назад
@@brunsnick thanks for the info! Love watching your videos, keep up the awesome work!!
@allen78331
@allen78331 9 дней назад
I really want to try that ? On my black widow but ? I got feeling I might screw up my ball.
@brunsnick
@brunsnick 9 дней назад
Won’t screw anything up. And if you don’t like it, it can be put back to box surface pretty easily.
@jazzscott4604
@jazzscott4604 4 дня назад
Question: When are they going to release stealth hybrid footage
@brunsnick
@brunsnick 4 дня назад
@@jazzscott4604 later this month
@justinkolodziej5695
@justinkolodziej5695 8 дней назад
Next time: 10 minutes in the Lustre- King! Will it clog the pores or still absorb oil? (if there's even one that works somewhere in there haha)
@scottwilson6712
@scottwilson6712 9 дней назад
Good video Nick however, typically you have about 10 minutes of practice for a tournament, doesn't seem like much time to get a read, make all these adjustments, and hope you get it right. I understand the need for surface and I use it, just seems like a lot in the short time you have in a tournament situation. You have a great channel.
@brunsnick
@brunsnick 9 дней назад
True, part of it is being prepared ahead of time going in with some knowledge of what you’re bowling on and how you plan to attack the lanes. Then, let your experience decide what you need to do in that short amount of time. If this, then that sort of scenario.
@scottwilson6712
@scottwilson6712 9 дней назад
@@brunsnick hey Nick, thanks for taking the time to reply. I appreciate it. Keep rollin
@levihayes5365
@levihayes5365 9 дней назад
But it normally smooths out the backend motion correct? Burns up more causing less snap
@brunsnick
@brunsnick 9 дней назад
@@levihayes5365 not everyone will see the same motion because of differences in the way we throw it but the ball needs to slow down in order to strike. Sanding a ball will bring the reaction closer to you, and will smooth it out, but the ball still needs to read the lane pattern.
@manaflala
@manaflala 9 дней назад
Because of how expensive pads can get I use scotch pads I get from work 😂 240, 360, 400, 600, 1000, 1500, 2000, 3000. I know Mo was a big proponent of abrasive pads over sanding pads. I only used sanding pads when I do a resurface on the Haus machine. 🤙🏾
@brunsnick
@brunsnick 9 дней назад
I used scotch brite in the resurfacer for that same reason. But this was before sanding pads really took off.
@surfboardshack3327
@surfboardshack3327 9 дней назад
What do you recommend for high friction SPL? Need the surface to get the ball to hook but it burns up and flat 10s all day. Seems like it’s always burning up or too clean.
@brunsnick
@brunsnick 9 дней назад
Maybe a lower flaring ball with surface might be the answer.
@surfboardshack3327
@surfboardshack3327 9 дней назад
@@brunsnick will try that. Thanks for the tip
@13menrollingdown
@13menrollingdown День назад
What I'm wondering is, what happened to the market for dull balls? I feel like every ball I see getting reviewed now is a pearl. Where did the interest go for just buying a strong, dull finish ball? Is EVERYONE a rev-dominant two-hander now?
@cheynrnye7589
@cheynrnye7589 9 дней назад
I've noticed when using something that has polish on it after a few games seems to get lane shine is it true or is it just me I end up hitting my stuff with 5000 grit or even 4000 grit
@brunsnick
@brunsnick 9 дней назад
It’s usually the slightly duller ones that get lane shined, not the polished ones.
@joehoenig7596
@joehoenig7596 9 дней назад
Could you please do a sequel vid about pre-surfacing, or changing surface before bowling for score starts? As we all know, we can't change surface once competition starts. so how do we figure out what surface we need?
@brunsnick
@brunsnick 9 дней назад
Sure, I can do a follow up but a lot of what I will talk about is knowing what you’re about to bowl on, and how you plan to attack the pattern with what you brought. It’ll come down to experience and trusting what your eyes are seeing.
@joehoenig7596
@joehoenig7596 9 дней назад
@@brunsnick Thank you. You could combine this topic with the broader topic of deciding which balls to bring to an event, when logistics won't allow you to run out to get another ball from your trunk. And then, if you guessed incorrectly, or somewhat incorrectly, how can you use surface to make what you brought usable? That would be helpful to me...
@BewseyyPvPLivinLife
@BewseyyPvPLivinLife 8 дней назад
can you do this to solid balls too? or just pearls.
@brunsnick
@brunsnick 7 дней назад
@@BewseyyPvPLivinLife you can do it to any ball. (This is a solid btw)
@BewseyyPvPLivinLife
@BewseyyPvPLivinLife 7 дней назад
@@brunsnick its a solid but shiny?
@brunsnick
@brunsnick 7 дней назад
@@BewseyyPvPLivinLife correct.
@tramski1275
@tramski1275 5 дней назад
If the factory finish is 500/1000/1500 how do adding 2000 make it earlier? Thanks!
@brunsnick
@brunsnick 5 дней назад
It doesn’t. This scenario is with a ball that comes out of the box shiny with compound.
@GrumpaBaggins
@GrumpaBaggins 9 дней назад
I've been trying surfacing for the first time lately. It's been trial and error, with mostly error 😂. I think I'll get it figured out. Anyone have tips for a good grit on the Perfect Mindset or Theorem? I have CTD pads and conditioner.
@brunsnick
@brunsnick 9 дней назад
@@GrumpaBaggins start high and work your way down is usually the way to go.
@GrumpaBaggins
@GrumpaBaggins 9 дней назад
@@brunsnick thanks Nick. I'll give it a go. Always love the videos!
@GrumpaBaggins
@GrumpaBaggins 4 дня назад
@brunsnick I dropped the Perfect Mindset to 2000 and slowed my speed. It's starting to finally hook some. I might try 1500, but I thought I'd see how it works for 10 games or so first.
@marlowhuff5975
@marlowhuff5975 9 дней назад
What grits do you recommend for Rev dominate players?
@Breaking_bogey
@Breaking_bogey 9 дней назад
I’m 16 mph at the pins and 450 revs. I keep my solids at 1500 and pearls at 2000 on a house shot. But I also play deeper in the lane and can manipulate hand position
@brunsnick
@brunsnick 9 дней назад
Depends on oil patterns really. There’s no one size fits all.
@jacepogo8
@jacepogo8 9 дней назад
Hi
@michaeljamrozy4299
@michaeljamrozy4299 9 дней назад
I'm bowling 42' Kegel Autobahn tomorrow. Advice I've found for this pattern is to avoid surface because it will make the shot more difficult. Nick, if the word is not to go nuts on surface, but for sport control is your friend, any wisdom?
@brunsnick
@brunsnick 9 дней назад
Advice is one thing, first hand experience is another. Let your ball reaction be your guide on this one.
@michaeljamrozy4299
@michaeljamrozy4299 9 дней назад
@@brunsnick Sounds good! I've got 3 weeks on this pattern. I'm going to try the avoid too much surface tomorrow...Perhaps pick a ball for the following week to bring the surface down for fresh just to compare
@taylorkiss4168
@taylorkiss4168 9 дней назад
How do you decide this quick enough in warmups? lol
@brunsnick
@brunsnick 9 дней назад
Having an idea of what you’re bowling on helps a great deal and having experience to trust your eyes to make quick decisions.
@Craigchessplayer
@Craigchessplayer 5 дней назад
This ball migh5 be use for two finger
@Filard25
@Filard25 9 дней назад
Maybe a dumb question but what if I need the shine back after I surface it?
@ericle6984
@ericle6984 9 дней назад
Polish
@brunsnick
@brunsnick 9 дней назад
@@Filard25 if you want to bring it back to factory finish, in this case, you’d want to repeat the steps from the beginning. 500, 1000, 1500 Siaair / Factory Compound. Best done on a spinner or resurfacing machine.
@Filard25
@Filard25 9 дней назад
@@brunsnick ahh. Okay. Thanks so much for the reply.
@Filard25
@Filard25 9 дней назад
@@ericle6984 thank you!! 🙏
@Norsebowling
@Norsebowling 8 дней назад
I keep my one remix at 1000 and throw it on everything
@arandomcommenter7051
@arandomcommenter7051 8 дней назад
14:00 Phoenix White Approves This Message
@jasperjones7836
@jasperjones7836 9 дней назад
After I apply surface to my balls, Ive noticed the first shot always bites early. Every shot afterwards they seem to do what I was going for. I wouldnt judge the difference from surface by the results of the first shot afterwards. Roll ya one or two shots after applying surface then make the call 👌
@user-hr7im6fn7j
@user-hr7im6fn7j 9 дней назад
I like your videos but why is your middle finger and your ring finger on your ball different angles
@brunsnick
@brunsnick 9 дней назад
Sarge Easter Grip - welcome to the channel, be sure to subscribe! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ax8H7MisJms.htmlsi=1cgH_YN8l4198NzG ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dAbFCPtqD-8.htmlsi=JXJ6Qx5Ym5zbyIDK
@yournightmareracing1754
@yournightmareracing1754 9 дней назад
I promise there is voodoo magic in the 3000 grit pad. 13 years as an NCAA coach and we swore by it for the right balance of bite, shape and going through the pins. The lower surfaces were definitely good on 44' or longer because the oil blended the shape. But 3000 was the chef's kiss more times than not on anything less than 44' or a house shot.
@michaeljamrozy4299
@michaeljamrozy4299 9 дней назад
I've heard more surface on short with volume. I definitely hear what you're saying for medium... mind you I'm not sure... I'm just getting back into sport shots
@yournightmareracing1754
@yournightmareracing1754 9 дней назад
@@michaeljamrozy4299 500 to 1000 can definitely give you roll/stop on the short. For short patterns we usually used polished high RG pieces and played 8-10 at arrows to 4-5 breakpoint. 38 to 43 feet is where the 3000 & 4000 shined.
@michaeljamrozy4299
@michaeljamrozy4299 9 дней назад
@@yournightmareracing1754 Do you know 42' Autobahn? Any advice?
@michaeljamrozy4299
@michaeljamrozy4299 9 дней назад
@@yournightmareracing1754 Autobahn 2542 I guess
@yournightmareracing1754
@yournightmareracing1754 9 дней назад
@@michaeljamrozy4299 There's a lot of oil to 29 feet across the lane with buff for the remainder. I would try to keep it in front of you being firm with a Hybrid or an NU piece if you have high revs. As it transitions it might require a bigger jump than normal. Definitely use a fill ball to check inside reaction.
@mauricerogers1980
@mauricerogers1980 9 дней назад
I'm sand my outer limits pearl to 2k and dry it
@shaneconnelly9594
@shaneconnelly9594 8 дней назад
You didn’t hit the entire ball with surface you forgot to hit the area of the holes.
@brunsnick
@brunsnick 8 дней назад
Darn
@Notconceitedjustbetterthanyou
@Notconceitedjustbetterthanyou 6 дней назад
You struggle because you don’t come out of the thumb clean.
@Accumulator1
@Accumulator1 7 дней назад
Just need to sand the track area , not the entire ball. Use 600 grit. That release is horrible. Coming out of the ball on the side instead of behind it. Eww. Good for chopping a rack.
@brunsnick
@brunsnick 7 дней назад
1, that’s illegal. 2, thanks Coach. I’ll still mop the floor with you.
@ScottyThompson-lt7wl
@ScottyThompson-lt7wl 9 дней назад
Cool video talk tech bowling ball brunsnick
@undisputedboyka12
@undisputedboyka12 День назад
I keep a picture of you in my wallet
@Jason_P
@Jason_P 9 дней назад
1000 is not nearly "extreme". 👎
@educatedduck6618
@educatedduck6618 9 дней назад
How is 1000 surface not extreme?
@Jason_P
@Jason_P 9 дней назад
@@educatedduck6618 Because I (and many others) always have a 500 pad with me and I use it often. Anything below 500 is extreme in my book. Many balls come from the factory at 1000 or 1500. That's in no way "extreme".
@brunsnick
@brunsnick 9 дней назад
For the given pattern 22ml it’s extreme. It’s all about the environment and bowler.
@nordattack
@nordattack 9 дней назад
I would have to disagree with something you said, you said "surface changes the entire motion of the ball." Surface does not change the motion of the ball, the core and layout are in charge of that, surface (to be clear, lower grits) allows the ball to get friction on the lane earlier, but the how the ball moves through the lane and the properties of the ball's core and how it dominates the reaction remain constant. That unique core/layout motion will just happen sooner rather than later. Now, as a 1960's style Full Roller Senior bowling on House shots, surface as you call it, meaning lower grits, is my enemy. That will guarantee the ball will die early and have no energy at the pins. Especially since I play the lanes the old way, down and in from the outside. On sport shots however, lower grits are essential to get the ball reading the lane early enough for good ball motion and margin of error. At Nationals this year in D/S I used a Carbide Tank at 500 grit playing directly up 4 board for all six games and never had to move a millimeter.
@brunsnick
@brunsnick 9 дней назад
If that ball was high gloss polished, could you have played 4 board the same? A sanded white dot vs. A shiny white dot would be very different on the lane. While the core in performance balls does have an effect on ball motion, the surface of the ball will still dictate the majority of the ball path. The core can’t do much of anything if there is no friction.
@nordattack
@nordattack 9 дней назад
@@brunsnick I understand that, but the layout and core combo dictate 'how' the ball moves, it's shape, once it sees friction, not the grit of the cover. Grit just serves to increase or reduce friction with the lane allowing the ball to slow down sooner or later, but once it does slow down and start to react to the lane then the core and layout take over. So grit will never change the "entire motion of the ball."
@brunsnick
@brunsnick 8 дней назад
@@nordattack without friction, the core can't do anything except flare. www.dropbox.com/scl/fi/slglt9i02bagvy3l63s4a/1000vsBox.jpg?rlkey=kpygurobu97i3gsi2vhtgq3kz&st=8ag8b0fx&dl=0 Box Surface Strike vs. 1000 - It's over an arrow different in hook, and entry angle from 2.99 to 3.9 and 4.81 even being thrown 1.5mph faster.
@nordattack
@nordattack 8 дней назад
@@brunsnick We are talking about two different things. You are talking about putting enough grit on a ball so it slows down properly, I am talking about how the ball shapes through the lane once it does slow down which is a product of the core and layout. If all you had to do was use the proper grit then we would not need layouts or cores at all in a ball to shape it, grit could do it all.
@PaulTheBeav
@PaulTheBeav 9 дней назад
Why do you use that goofy finger layout?
@brunsnick
@brunsnick 9 дней назад
Feels good.
@lockedonlaw
@lockedonlaw 9 дней назад
I refuse to ruin my bowling balls.
@brunsnick
@brunsnick 9 дней назад
Explain how it does?
@lockedonlaw
@lockedonlaw 9 дней назад
@@brunsnick It doesn't for you. I'm speed / rev matched so I can make the ball do what I want by using a lot of other techniques. I can adjust speed, hand position, etc. and make the ball do what I want most of the time. If I scuff a ball, I have to increase my normal delivery speed to get it to the break point.
@educatedduck6618
@educatedduck6618 9 дней назад
@@lockedonlaw Then you aren't surfacing it properly or at the right time lol. You can adjust your speed and hand position all you want, it's never going to give you the result of surfacing your ball. So you either are doing it incorrectly or you don't bowl on patterns that require it.
@TrevorPrinceMusic
@TrevorPrinceMusic 9 дней назад
​@educatedduck6618 I agree with you. I'm a matched player. But I also bowl in challenge and sport shot tournaments. Surfacing is a game changer.
@lockedonlaw
@lockedonlaw 9 дней назад
@@educatedduck6618 Like Nick said, he's mostly talking to speed dominant players. I'm not one. I learned to bowl when you used one ball for strikes and spares. My point was I don't want the reaction surfacing the ball gives me. That's not to say no one wants it. I bowl on the same PBA patterns everyone else does. I can also play outside-in, something very few players today seem to be able to do.
@jasonellis6374
@jasonellis6374 9 дней назад
My question is how often should you surface the ball like once in a while or every week before leagues I recently had a ball baked and then they surfaced it for me it completely changed it brought back old memories hahaha but should I plan on doing it again soon ? It’s been a month or so lmk thanks ! Also your feet are always sideways but are your shoulder square to the pins jw ? Lol
@brunsnick
@brunsnick 9 дней назад
Depends on the ball really, duller balls require a little more upkeep. If you like the box surface dull, then quick touch ups often won’t hurt anything. Getting the oil out every 60 games is a good idea.
@jasonellis6374
@jasonellis6374 8 дней назад
Thanks Nick for the response and the videos this is something I’m actually dealing with at the moment !
Далее
This Pro Move Will Make Your Bowling Swing Effortless
13:49
КАК ДУМАЕТЕ КТО ВЫЙГРАЕТ😂
00:29
Minecraft Pizza Mods
00:18
Просмотров 2 млн
Two Handed Bowling Tips: Staying Behind The Ball
11:49
I drilled the most ILLEGAL ball I could find..
23:28
Просмотров 52 тыс.
Bowling On NO OIL! | Highest Score?!
10:59
Просмотров 30 тыс.
Use this trick to NEVER MISS ANOTHER TEN PIN!!
3:55
Просмотров 44 тыс.
MID-PERFORMANCE? UH, NO! | Hammer Scorpion Strike
13:09
How To Hook A Bowling Ball | Complete In Depth Guide!
16:25
Players with Their Kids
0:31
Просмотров 4,4 млн
Ishowspeed vs Ronaldo vs Messi Disguise Challenge
0:29