You were right about the Avata... 

Most important part of having an FPV drone is a soldering iron. Can’t be paying someone every time you have an issue my dude.

What happened to the Avata is what we call physics. The Avata is not made to do those kind of turns right back into "turbulant air" caused by the propellers, it's simply not designed for that. It's like trying to do drift with an SUV and then wonder why it rolled over, it's an extreme example but it's all about physics.

First your motors stalled, then you stalled... You could've done much better AND you already have, just not that day. We all been there! Keep it up! Great video, not a single dime wasted for the lessons you learned and taught us all

I got to say, I'm glad you upgraded from the avata, it was my first drone and it was both the best and the worst drone I could have started with (as a beginner fpv pilot). It was so damn loud with the stock props, it could still be heard from like 2 fields away and never took off from any type of grass when crahed (same message of motor stalling). But that drone is what lead me to expanding my fpv journey like yours. I did end up doing the axisflying 3.5 modification and there was big improvement but it was only so far you could take that drone. Now rocking a Axisflying Manta 3.6 and it's a beast for it's size. I hope your journey works out for you. Good Luck!

Learning to solder well is definitely next on your list 😊 fly high man fly fast

rlly like this series

I got to say, your FPV journey has been incredibly inspiring for me, it started out when I got a BetaFPV Cetus Pro about two months ago. I got pretty good at flying and eventually got bored because the drone was so underpowered, and I didn't have the time or money to buy or build a new larger drone since I'm in grade seven. But then I saw your first FPV video in this series, and it encouraged me to keep flying and keep practicing. And now you have gotten a better drone built which has inspired me to also make money and build a drone, I've picked out all the parts and am about to order them. Keep up the amazing work and thank you, for inspiring me to keep flying.

If you're dead set on bind n' fly, buy the Nazgul DC5 Eco for half the price you spent on the avata. With any leftover money buy extra batteries, and a proper ELRS controller/ reciever

Out of curiosity, does Albert have any socials where he posts his drone work? Thanks! And thanks for taking us along for the journey! 🧡

Nice Video, nice edit! Got the same problem with the avata, but always able to recover in the air. If you get the feeling, you learn how to avoid it. Keep going and have fun!

Lol damn bro this has been a known issue for years my guy. Avata ain’t meant for the race track you need a powerful custom 5 or 7 inch quad for stuff like that.

0:30 Commenting as a former Avata owner as i watch. Let's see how this goes. 1:50 i knew it lol 3:40 you'll find nothing wrong with it. It'll appear normal. Just a warning you received is all. 4:10 it's the death roll sir. Google Avata death roll 5:10 this is why i don't have my Avata anymore. I broke it doing this upgrade 😔 7:40 feeling a real fpv drone...i hope that brought your confidence back. It did for me 8:05 welcome brother! 8:11 This was literally me two weeks ago lol

That’s the infamous yaw tumble. The exact reason why you don’t want to race the avata. It can be done if you’re careful with hard yaw turns. The motor stalling was because of the grass probably

Hey Nic, I used to have the same problem with the avata. In fact I lost my first Avata in a rivier while flying in manual mode. I have to say that you were lucky your didn't crash. My second avata crashed on the highway and bounced to the curb, luckily it didn't have much damage. I was so stressed and ended up upgrading with the axisflying 3.5 KIT. and now It flies perfectly. Maybe you should try that too. It'll be a fun video

Love the series man! Cant wait for the next one.

YESSIR he's finally gets a REAL fpv drone

one of us one of us! nice job flying and filming.

Some good story-telling my friend.

Banger vid my guy!

Yooo That is Sick!

The 'Motors stalled' warning was most likely because of the grass you landed in, it looked like it was sticking up through the props, blocking them from turning during startup.

why does albert look like messi...💀

Keep up the good work nicolas

You are amazing bruh. Keep doing what you do. One day you will become one of the most successful youtubers ever

all these fpv shots we all take for granted lol

I recently started fpv with a Cetus X and jaw wipeout happens too, when I throttle it too hard while "drifting". But I can just catch it and continue, as there is nothing intelligent in the drone. Was going to neutral a safety response?

🦦 Yeah... no. Repair skills should be present. Good stuff man.

I just fried my whole stack on my race build

The day i ordered my first part of fpv gear this dropped (havnt flow yet) and keep getting more excited to get this of the ground

I have an Avata 1. I'm aware of the yaw-washout limitation. In manual mode, top speed is ~97km/h, sport just under 50km/h, normal just under 30km/h. Fine drone within its limitations.

great video. cant wait for the next one

My initial thought here was, the Avata is the wrong tool for the job… Cinewhoops are not meant for this type of flying. Use a proper FPV drone that isn’t top heavy or has ducts. Not being harsh but you have a lot to learn.

You flew it that smoothly the first time you flew a FPV drone? I was all over the place. I am still learning.

Keep it up love ur videography and cool stuff Vids

i did solution 1 and modified my drone btw. i dont got lots of practice and it was notthat hard and it works grate it sometimes gives some error mesages but i never had the yaw porblem again.

Top cool bro

I thought Australia would have some grass roots drift car stuff.

Known issue with avata 1, avata2 is much better. Going to tutle mode and back can reset it. So should power off and on motors

I am confused why is he holding a straw with a microphone atached

Just found this..I'll make sure to sub and follow the goal ..just curious why you didn't think of the avata 2? All u needed was the drone itself since u had the goggles and remote from the first avata

If you wanted to save money you could've used the same DJI Avata controller just FYI - but wise move because the Tango2 (which you bought) is significantly better.

Yellow i wish i had such a thing too😅

this guy has amazing editng and its not appriciated enough like this up and SPREAD IT!!!

Seems like we got a same way. Avata, dead yawn. But you are lucky and DJI update the hardware if issue happen, switch to normal mode, but my avata happen before the update and get heavy crash on the edge of house, downside sensor broken. This is why I switch to real fpv and get more control. In actually, I am not diy fans, mostly enjoy the fly.

Great story telling 😊

Been enjoying the content lately! Really well edited and thought out. We should collaborate sometime! Would be fun to build a drone and send it halfway across the world lol

for your dream shot tbh i recomend the avata still, you will be flying behind a massive rock and im not sure if your fpv has the auto return to home saftey features like the avata

Hey mate, I’m interested in flying Fpv here in Australia, specifically outdoors and I was researching the laws and what not and apparently you need CASA approval or something like that. I was wondering if you have done that and if not have you had any problems? or would I just be alright to go ahead and fly?

Great job man!

amazing videos man keep it up

I was like oh that's not too bad of price while looking at the drone then realizes it's in Australia and its nearly 1000aud for it I feel bad

The avata 1 and 2 don't like yaw snaps at high speed.

this guy is just a god. bro pls dont give up

You could have saved some money by just keeping the goggles and Controller of the Avata. Both pairs with regular o3 air unit

I had thought balance was about the same whether the weight was on top or bottom? I'm pretty sure Wren from corridor digital made a nerf blaster on the top of a drone.

Probably overheated the motors or ESC. The avata isn't meant for speeds like that...

Video is really good

oh also yaw spin wipeouts is becuase it is ducted (has prop gurds)

Sheesh looks sick bro

*buys iflight bind n' fly* "I sTiLl cOuLdnT kEeEP uP!"

For the past few weeks I only flew my new 5 inch and then I tried out my Avata yesterday and it felt like a toy. Its so slow and heavy

what angle are you flying for the car chase?

Your finding out that all drones are not meant to do all things, and cinewhoops are not generally known for speed and agility. You're right that a 5 inch would perform much better to chase a car.

I don’t get why the views are dropping like the video quality is so highhhhhhh and I love watching I’m sorry man 😢

Results??????? Did you get the shot?

Although u got the right components, u could have saved money on the remote and the RX. That 5inch has an o3 system which means it is compatible with the dji remote 2

Keep it up bro!

Hey Nicolas im looking for some fpv mates. i live in south east Qld

I have a question, why didnt he just buy a dji fpv?

The Avata 2 is much more stable. That battery design on the first gen is an absolute mess. Horribly top heavy and highly prone to ejection. As a complete noob I'm more than happy with my purchase. But I'd be much happier if my goggles 3 and controller 3 worked with other air units. Hopefully that day comes sooner than later. Until then, I can't fully recommend it.

since u were going max power there might be a chance of propwash

HDZero ordered yet?

A bit loud music 9:42 but great video

dont you have a 5 inch quad? The Avata might just be the worst drone for chasing cars

I don’t think that’s how you say lipo

Hey I'm 16 and really wanting to get into drones would it be possible to get your avata 2 if not that's completely understandable but why not ask

Fantastic video! It's really nice to see your journey into FPV. It makes me want to go out and fly more. I've only got tinywhoops and would be limited to sub250g if I wanted anything bigger that I could fly locally 😢

What do i have to do for you to bye me a drone

For real

Seriously? Crossfire is four wires to be soldered.

What about the dji fpv.

Kinda crazy how you have the confidence to go to a racetrack not even being able to do a clean split s

only 100 views in 15 minutes hes coming back!

Or try avata 2 it’s so much better than the first one

You could just use your current DJI goggles and DJI RC2 with the Evoque O3 without investing more money

get it bro

Isn't FPV illegal in Australia?

4 blade master airscrew or HQprop will fix that

should have got an avata 2 or dji fpv

i dont think you get the point in fpv drones the most importent thing is to build the drone urself so when you crush it (and you probobly will) you know how to fix it and were to get the parts. I dont think you are ready for what you are trying to do..

use the liftoff fpv map or tryp fpv

GOOD VID

yay

your pretty good at this but i think you can still get better

love from india ❤

Yo

What happened to this series?!?!? Been silent for three weeks now.

dude albert sucks too on this shot he lost almost half of the car while getting close :D

Told ya

Why didnt you buy the avata 2?