Your PC Can Look Like THIS Now!

Подписаться 16 млн

Просмотров 1 млн

50% 1

Check out the Sharge ICEMAG at bit.ly/SHARGEICEMAG
Check out Acronis Cyber Protect for businesses at
go.acronis.com/LTT
We've seen a lot of 3D printed supports for soft tubing to make it look cleaner, but finding 3D printed hardline was a challenge. So naturally, we decided to try it ourselves. Any guesses as to how long it will last under pressure?
Discuss on the forum: linustechtips.com/topic/15704...
Buy an EinScan Pro 2X V2 3D Scanner: geni.us/tcAJj
Buy AESUB Blue Scanning Spray: geni.us/Q1REG
Buy Self Glowing UV Resin Colorant: geni.us/C5KMh3
Buy Monocure 3D TUFF Resin: geni.us/BdtSX (At SPOOL3D Canada: lmg.gg/xZkNF )
Buy a Elegoo Saturn 4 Ultra 3D Printer: lmg.gg/11DPq
Purchases made through some store links may provide some compensation to Linus Media Group.
► GET MERCH: lttstore.com
► GET EXCLUSIVE CONTENT ON FLOATPLANE: lmg.gg/lttfloatplane
► SPONSORS, AFFILIATES, AND PARTNERS: lmg.gg/partners
► EQUIPMENT WE USE TO FILM LTT: lmg.gg/LTTEquipment
► OUR WAN PODCAST GEAR: lmg.gg/wanset
FOLLOW US
---------------------------------------------------
Twitter: / linustech
Facebook: / linustech
Instagram: / linustech
TikTok: / linustech
Twitch: / linustech
MUSIC CREDIT
---------------------------------------------------
Intro: Laszlo - Supernova
Video Link: • [Electro] - Laszlo - S...
iTunes Download Link: itunes.apple.com/us/album/sup...
Artist Link: / laszlomusic
Outro: Approaching Nirvana - Sugar High
Video Link: • Sugar High - Approachi...
Listen on Spotify: spoti.fi/UxWkUw
Artist Link: / approachingnirvana
Intro animation by MBarek Abdelwassaa / mbarek_abdel
Monitor And Keyboard by vadimmihalkevich / CC BY 4.0 geni.us/PgGWp
Mechanical RGB Keyboard by BigBrotherECE / CC BY 4.0 geni.us/mj6pHk4
Mouse Gamer free Model By Oscar Creativo / CC BY 4.0 geni.us/Ps3XfE
CHAPTERS
---------------------------------------------------
0:00 Intro
2:09 The Process
3:10 The Problems
4:15 The Solution
7:15 Linus and Alex React
10:06 Conclusion
13:07 Outro

Наука

Опубликовано:

11 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,8 тыс.

@LinusTechTips 27 дней назад

Thanks for pointing out the issue with the Sharge sponsor read, we're removing that short portion from this video and we'll reshoot it for future integrations.

@Mrbigcheesecompany 27 дней назад

Wow 1h ago

@shellderp 27 дней назад

is this a trick to make me watch the ad spot

@jamesch7428 27 дней назад

Gaming subreddit toxic, nice.😂

@donc-m4900 27 дней назад

Does the ECC all have AdBlock? (I know it's not a yt ad.)

@easiers 27 дней назад

There goes the 100,000mAh dream 😔

@Jourei_ 27 дней назад

3D print a case. Make it be the tubing and reservoir.

@GoldMike_ 27 дней назад

That is an incredible idea but would be hella complex to make

@barnett25 27 дней назад

Metal 3d print the case so it can be the tubing, reservoir, and the radiator.

@asicdathens 27 дней назад

They already printed a case. Nice one

@wilppuse 27 дней назад

thats actually genious

@wick174 27 дней назад

That case already exists. Uh. I don't know the name. I saw it on one of the Asian pc build channels

@Kytetiger 27 дней назад

remember kids, the difference between doing something stupid and doing something for science is that for science you take notes of your results (and shout "FOR SCIENCE!!" )

@alexdavis9324 27 дней назад

You also have to share your findings(notes) with other people

@Renegade605 27 дней назад

"The difference between science and screwing around is writing it down." -Adam Savage

@Physicus9 27 дней назад

@@Renegade605I came here to quote this exactly... thank you! :)

@TheHmm43 27 дней назад

Gave me nostalgic Bill Nye vibes too.

@NothingXemnas 27 дней назад

Empirical testing and knowledge is the backbone of the scientific method, afterall. There is no science behind the scientific method; it is just a structured/formalized format for messing about.

@aaronrdaniels 27 дней назад

Honestly one of the coolest videos LTT has posted in a while. Please go down this rabbit hole. Im sure more will be uncovered of how viable this might actually be

@austinclark3495 26 дней назад

This!

@ryantakahashi9130 27 дней назад

There was a recent post in the r/SFFPC subreddit where a user 3D printed molds instead. Then used regular hardline tubing and used heat to fit them to the mold. Was able to achieve something super complex but without having to go resin and print the full tubes. It would work great for an SI when they have fixed configurations, they could just premake all the tube runs with ease.

@boxhead6177 24 дня назад

Custom Scientific Glass Blowing has a similar process where they use regular tubing and stock glass to form custom pieces for laboratory and manufacturing use which has to be of a high standard for professional use to withstand heat and pressure tolerances fit for purpose. Or if you think of it as a prototyping route, make a model test fit... and then go completely over the top and follow an artistic route glass blower/sculpter to make the final product. The looks you could pull off like go full glass crazy straw, mad-scientist labratory glass kit, abstract art like a glass knot or klein bottle, or waterflow sculptures.

@sykesmcenzie 23 дня назад

If you don't want to resin print you can fdm print casings to hold softline tubing, you just thread the tubing through the printed casing and you have your shaped tubing

@slothnium 27 дней назад

Open loop splashing water on a tower heatsink would be hilarious. You'll probably have to top it off every week due to evaporation, but it'll double as a humidifier.

@toddblankenship7164 27 дней назад

Auto refill with a toilet filler thing like recently did on the server cooler thing

@jsVfPe3 27 дней назад

@@toddblankenship7164 How about a PC that uses your home's toilet bowl as the reservoir?

@FrietjeOorlog 27 дней назад

Ah yes, the algae breeder 9000.

@Zolo4213 27 дней назад

Have it be refilled by a Swipe+ bidet on a RasPi with a level sensor.

@noth606 27 дней назад

Every week? Eh, if the capacity is like common loops, several times a day to once every hour or so running an i9 with load on it. You'd have to demineralize the loop once or twice a day or your pump won't make a full day without seizing. Realistically you'd have to automate refill based on some level point or you'll cook stuff or have auto shutdown due to thermal alarm constantly. Think of it this way, would you want a 100w+ air humidifier?

@caddyguy5369 27 дней назад

I didn't realize there was a scanning spray that cleaned up with sublimation. I was only aware of ones that required manual cleaning. Going to have to give it a try.

@Sirotaca 27 дней назад

I use it all the time in my job. It can take quite a while to fully sublimate, but even if you end up having to clean some of it off manually, it's still a lot less messy than dealing with the non-sublimating stuff.

@ians7184 27 дней назад

I have never even heard of scanning spray before and even I was super excited about it sublimating to remove itself

@charliebridgman9144 20 дней назад

It works really well but it’s quite expensive. I usually just use foot spray unless it’s a very complex component

@shounaksarkar5917 24 дня назад

I am kind of glad that they brought the intro back. Honestly I feel like linus should do more off script stuff. Makes the video more genuine and spontaneous

@RadikAlice 26 дней назад

Saw the snail spiral, the color and genuinely thought "Dreamcast?"

@tomjansen629 27 дней назад

You are mad

@smashed_penguin 27 дней назад

He is mad scientist

@gen8901 27 дней назад

Mald*

@AndyIsHereBoi 27 дней назад

Bald too

@LordKosmux 27 дней назад

Maid

@Sol4rOnYt 27 дней назад

Yep

@bradybalaban 27 дней назад

"You're a mad man" -Someone to Linus probably

@labhamjain3915 27 дней назад

@tomjansen629 said.

@LordKosmux 27 дней назад

Linus to Linus*

@KamielDV2 27 дней назад

Probably all his employees on a regular basis

@braydonpugs1271 27 дней назад

Me to linus

@error-uq3mf 27 дней назад

I 100% hope you do have Alex do that. It sounds awesome!

@Solomon_Pett 26 дней назад

THE INTRO IS BACK YESSSSSSSS

@NotAnAmerican 21 день назад

literally all i like to see in an ltt video

@pancakeforge 27 дней назад

Ah yes, the Dreamcast pc

@TheHammerGuy94 27 дней назад

Mosquito coil?

@ernieoporto1111 27 дней назад

This was my first thought. Glad someone else came to the same conclusion!

@thehorsefromGOTs8 27 дней назад

bah, I didn't like it until this comment now I have to have it.

@datoaster4991 27 дней назад

I see you a man of culture as well

@Kawayolnyo 27 дней назад

Dreamcast IS the PC, since it's running on Windows CE, has a keyboard and mouse, and can go online (even still, due to fan-hosted dedicated servers).

@Tape30 27 дней назад

He did it. He actually did it. The absolute madman.

@gnarr 27 дней назад

Yeah, yeah, but your scientists were so preoccupied with whether or not they could that they didn't stop to think if they should.

@Weepsy_ 27 дней назад

Can't wait to see Linus on the r/madlads

@NexGen-3D 27 дней назад

About time you guys tried this, I did this years back with my Anycubic Photon, only did a few difficult bends, but 4 yrs later they are still in daily use.

@TheFirstSSJ 25 дней назад

Mosquitos hate this water loop design

@aadityakhetwani6314 27 дней назад

The orange spiral loop looks like a JALEBI.

@_D_P_ 27 дней назад

Never heard of them. Looks yummy.

@ark_knight 26 дней назад

@@_D_P_ if you like sweets and sugar syrup, you will be at home.

@CyberNacho 25 дней назад

Need Linus singing jalebi baby on an update

@ark_knight 25 дней назад

@@CyberNacho no

@vivindeenathayalan9975 25 дней назад

Came to the comments section looking for someone to say this and found out that its the second liked comment

@thundervr8441 26 дней назад

Man I have been 3d printing for nearly 6 years now and this is very cool tbh I’m very surprised no one thought of this before but man you guys did a great job keep up the brilliant work guys your all the best.

@fountaingoat6802 26 дней назад

This is cool. If you have a small resin printer, you could conceivably print separate tube sections with each end having a male/female end that fit together and glued with resin. Each section can be oriented for best quality.

@Justethann_ 27 дней назад

“I paid for the whole tube, i must use the whole tube” ahh cooling tube

@KokoroKatsura 27 дней назад

A N I M E N I M E

@TrigTrig 27 дней назад

UV reactive resin mixed with classic neon signage bends would look amazing on a cyberpunk style build

@OmegaSimPilot 27 дней назад

Okay I will admit that is pretty awesome...been watching a ton of custom loop videos since my next build I want to finally do my first hard line...and this is just cool!

@dinfernosev 27 дней назад

As a user of shinning 3Ds scanners! It’s great to see this company get some exposure! Nice

@Ikxi 27 дней назад

Damn you promised an NDH-15 waterfall cooler Will wait to see that!

@bighammer3464 27 дней назад

Linus took off his metal challenge gauntlet, slapped Charles Harwood across the face, took his puppy, and stomped over his flower garden and said this isn’t a challenge. 😂😂😂

@YouareGodsAnointed 27 дней назад

wow

@maxi2702 26 дней назад

Saying that something isn't a challenge make it a challenge.

@viyer00 27 дней назад

This is sick. Some of your best content yet.

@jimmysgameclips 26 дней назад

I didn't know scanning spray just fades away!! That is gonna change a lot for me. Wonderful!

@ansonmoyer2600 27 дней назад

"im confident enought to risk my own 4080" *nudges the pile of 10 behind the table

@tobiasjennerjahn8659 27 дней назад

This is the kind of shit that I love ltt for. It’s crazy enough that I’d never try it first, but now that they’ve done it I’m kind of intrigued to try. Great video 👍

@JohnSmithYoutube 26 дней назад

I can totally imagine some viewers doing this at some point, you can use your phone to scan objects and there's plenty of affordable home gamer SLA printers out there. Love this kind of stuff!

@RylTheValstrax 26 дней назад

Resin toxicity varies dramatically depending on the formulation - and there are low toxicity formulations that are dramatically safer to use, but be aware that to achieve low toxicity tradeoffs in cost, mechanical (ex, tensile strength, glass transition temp), printable (viscosity, curing wavelengths, curing time, etc), optical (coloration, UV stabilization, opacity), or chemical (water sensitivity, ozone sensitivity, etc) must be made, so do your research on what you need to make the print actually function in its intended role and its compatibility with printers/curing lights/etc. I personally work with a very low toxicity PMMA/acrylic formulation for most of what I do personally, but while its got pretty decent mechanical and cost properties, it does make notable tradeoffs in chemical (high water sensitivity causing hydrolysis of the plastic before being fully cured), optical (low clarity on "transparent"/translucent prints), and printable (high viscosity) properties

@johnflapper 27 дней назад

This could be combined with that Humble PC and look absolutely incredible

@manojsahu-hr9qe 27 дней назад

*Dreamcast startup intensifies*

@mme725 27 дней назад

Thank you, I too was thinking Dreamcast lol 🍥

@GimpyDingo 27 дней назад

Mashes the start button.

@VitalVampyr 26 дней назад

Looks more like a resistive heated stovetop to me.

@oliviaradecki142 27 дней назад

I'm not prone to seizures myself but I really appreciate the approach taken to the warning here because they give ample time in the warning and indicate when its okay to look again. No one ever indicated when its okay to look again which just makes no sense.

@TheSkcube 26 дней назад

It did say it will be okay to resume watching when you hear a ding, and there was a ding. Though I would prefer a noise similar to the warring one but a different tone.

@TheRealNanoz 27 дней назад

7:25 yeah Charles 😂

@-B.H. 24 дня назад

It's pretty fun in seeing how far 3D printing continues to progress!

@nidhisingla7880 27 дней назад

Its insane that this doesn't leak like hell

@hed420 27 дней назад

Oh it will. I thought about doing this almost 6 years ago. Turns out that resin prints dissolve in water. Hope that the resin they used resolves this issue.

@Konigstiger 27 дней назад

@@hed420 There are plenty of resins that aren't water soluble. In fact, can you guess what kind of technique dentists use nowadays? Surprise! Resin 3D printing.

@MaethorDerien 27 дней назад

Well resin has been known to be water tight for years. Most of the resins for hobby use don't stand up well in water. That said there are plenty of ones that are water safe. Some of the new ones that you can thermal cure on top of the UV cure so you don't end up with the uncured internal resin issues although it is absurdly expensive and I don't think I have seen clear.

@JohnSmithYoutube 26 дней назад

@@Konigstigerwhilst resin is very good it does have its limits. I've got both mercury amalgam and the new resin/ceramic composite fillings, and the amalgam one hasn't changed in over a decade, still even looks like shiny, freshly cut metal. The resin one is starting to degrade and the dentist says it'll probably need redoing, or require a veneer, within a few years. They can only usually guarantee them for 10 years, amalgam lasts until death 😂

@JupiterGuy1 27 дней назад

12:37 umm this should be 10,000mAh rather than the 100,000mAh stated in the video... (If I'm not mistaken)

@staffie85 27 дней назад

Glad I wasn’t the only one who spotted the Engineer’s numerical disabilities

@donc-m4900 27 дней назад

Don't you have to be < 99,999 mAh to be on a plane?

@JupiterGuy1 27 дней назад

@@donc-m4900 yea that's the legal limit, also on the powerbank's website it says 10,000mah so he said the wrong number

@JupiterGuy1 27 дней назад

@@staffie85 (he's a writer not a engineer)

@mechatr0nix 27 дней назад

@@donc-m4900 The limit is 100Wh. For a 14.4V laptop battery, that would be 7000mAh

@802Garage 26 дней назад

You could also 3D print the reservoir, distribution block, and fittings with O-ring grooves. Plus you could vary the width of tubes, adapt between sizes without fittings, and make structural or decorative components that are part of the loop. Even FDM prints can be water tight, though it depends on material and print settings.

@ryanpiggs6566 27 дней назад

Thank you for this video! I was thinking of this idea.

@tronosgamingwizard 27 дней назад

12:36 - 12:39 "100,000mAh battery capacity" Hey Alex, you've got some info the printer doesn't have? Cause it printed 10,000mAh on the powerbank (as shown at 12:44)...

@Waldohasaskit210 27 дней назад

You can add a bit of adjustability into the tube as well by adding extra bends that allow some 'squishiness' in certain directions, depending on the rigidity of the plastic used.

@DarthPoyner 25 дней назад

The resin is usually very rigid. And putting more bends in it than necessary could lower your efficient fluid movement. You can't just heat bend it like the plastic or the glass.

@4RILDIGITAL 26 дней назад

Watching the 3D printed tubing in action felt like witnessing the future. The possibilities this opens up are insane.

@Dmanjack 26 дней назад

This is a tech tips video , so glad you found alex his video's are always fun.

@imperialdra-mon5907 27 дней назад

i miss the beard

@deleted_handle 27 дней назад

don't we all 😞

@Metal_Maxine 27 дней назад

He says it's staying off until he's finished painting his motorcycle pink.

@Bupcis7 26 дней назад

I don't.

@watercannonscollaboration2281 27 дней назад

You know who is also as mad? Our sponsor, Acronis! Okay jokes aside this is really cool. It’s even done in a SSUPD case with the Barrow combined pump/reservoir/block

@tuttocrafting 27 дней назад

I have 3d printed some mold for a custom loop I did for a friend it required a tube with 4 precise bends and to make it square I created a series of dies to properly bend the PMMA pipes.

@EvanDaGr8 27 дней назад

That's one cool-ass Dreamcast logo.

@sphygo 27 дней назад

Scanning the case is certainly an option, but bending a wire to the run you want and then measuring that wire would be a heck of a lot easier. And cheaper. Still a cool project though

@201bob 27 дней назад

maybe watch the video next time lol they literally said you could measure and that 3d scanning was overkill

@emanggitulah4319 27 дней назад

Definitely overkill... They had to justify the purchase of the 10k 3d scanner

@demoninveins 27 дней назад

@@emanggitulah4319Yeah, that's kinda part of the channels whole thing. Using sub-zero cooling is also overkill, yet they did it

@emanggitulah4319 27 дней назад

@@demoninveins sure it is.... It's like the question why does the dog lick his balls?

@KokoroKatsura 27 дней назад

a n i m e n i m e

@unknowndragon2831 27 дней назад

"You're definetly a mad man" -Someone who watched all linus dropping stuff scenes

@Syddy_ 27 дней назад

this is a great idea for creative ideas with your tubing

@Ila43Hernandez 26 дней назад

Tube clear that's pretty cool. You got a fan out of me.

@LichtVoltere 27 дней назад

Linus do you prefer bagels or croissants ?

@Atomy111 27 дней назад

i like tortoises

@the_undead 27 дней назад

Food

@CerebroJD 27 дней назад

It looks like a stove element hahaha i love it!

@psycho--maniac9775 23 дня назад

Just want to add that as I have grown older, this is one of the very few channels that still manages to maintain my attention

@conorstewart2214 26 дней назад

You absolutely can use FDM printing to produce watertight objects, I have done it myself using PETG and even in vase mode (where the wall is just a single continuous extrusion). You just need to have well tuned settings. PLA isn't good for watertight objects but most other materials are absolutely fine. Yes prints have layers but if your settings are right then the layers should be fused enough that there isn't any gap.

@-Jozef 27 дней назад

He’s only mad without the beard

@JupiterGuy1 27 дней назад

Printed 3D PC when?

@donc-m4900 27 дней назад

What's wrong with the cardboard PC?

@VitalVampyr 26 дней назад

They already made a 3D printed computer case.

@JupiterGuy1 26 дней назад

@@VitalVampyr but not a fully 3d printed one idk maybe add 3d printed screws, GPU riser water-cooling blocks (and using the stuff in this video) + 3d printed monitor stand mouse and keyboard

@JupiterGuy1 26 дней назад

I want to download a PC

@shebyjlo 24 дня назад

Thaaanks for the link of sharge. I was looking for something like that 👍👍👍 already order it

@Jsteri 26 дней назад

That is super cool. What a time to be alive really it is.

@aravindvissamsetty 27 дней назад

12:35 That power bank sure doesn't look like it does 100k mAH

@aaronmdjones 26 дней назад

I don't think I've ever seen someone write kilo milli before. They're literally opposites; just write 100 Ah.

@fkosh2 26 дней назад

@@aaronmdjonesbruh. Different measurements. They don't cancel each other out.

@pitecusH 26 дней назад

@@fkosh2 yeah, they do. But 100 Ah is quite large even for a car battery. It must be 10.

@aaronmdjones 25 дней назад

@@fkosh2 They do cancel eachother out; please learn the metric system. Kilo (k) means thousand, Milli (m) means thousandth. 1000 * 1/1000 = 1.

@deltacx1059 27 дней назад

4:04 means your settings are not correct, although it's less relevant because you can coat the stuff in epoxy. I printed a part in petg for a hydrolic tank and it is indeed water tight. There is a alternative where you fill the part with sand and put it in a box of packed sand then heat it enough to somewhat melt which will also seal the print.

@the_undead 27 дней назад

Maybe on a high-end printer I would agree with you, but on a lot of the extremely low quality low-cost consumer models, I would not expect those prints to be water tight. And yes, there are solutions for that problem but coding an entire tube in epoxy at that point, why don't you just use traditional hardline methods because it's impressive enough for way less manual labor

@deltacx1059 27 дней назад

@@the_undead because you can do shapes that are impossible for a normal tube. Also I do this crap on my used cr10 max.

@xXlURMOMlXx 27 дней назад

@@the_undeadI made water tight stuff on an ender 3 lol

@the_undead 27 дней назад

@@xXlURMOMlXx but can you reliably do that with relatively thin tubes? And also can you do that from printer to printer because something that you need to understand Is these cheap consumer models? Do not have high tolerances so you could get one that's capable of amazing precision and you can get another one that couldn't print watertight tubes to save its life, especially because a lot of these companies do not care about the tolerances they're they are just trying to sell you really cheap garbage

@xXlURMOMlXx 27 дней назад

@@the_undead that's a skill issue. The printers are cheap because you have to build them and calibrate it yourself. It's a pita but you get what you pay for. Spend a little more for a bambu and it's a non issue

@ThingsIdRatherBeDoing 23 дня назад

I've never water cooled anything and don't know anything about it outside what I see on this channel, and this is still a super cool video.

@eagledude 26 дней назад

one of my favorite vids in a while

@DarkKitarist 27 дней назад

Linus is legit good at front of the camera... Like he makes me sooo invested in the video...

@DarkKitarist 27 дней назад

It's like he's talking to me specifically not just talking at the camera...

@CannaKitty 27 дней назад

He talks like an overproduced, hyped up kids presenter 😂😂 you're joking

@mycelia_ow 27 дней назад

He does have 16 years of experience doing that

@CannaKitty 27 дней назад

@@mycelia_ow nah, he never used to act like he's jacked up 😂 been watching him be consumed by corporate for about a decade lol

@the_undead 27 дней назад

@@CannaKittydid you watch all the way through with the video?

@4MB1T1OUS 27 дней назад

Linus- I'm not a mad man ❌ Also Linus- Creates the weirdest PC cooling known to mankind✅

@diegon7781 27 дней назад

Love this type of videos, it inspires me to go and try that on my machine xD

@RileySkye100 26 дней назад

The orange swirl immediately got me thinking of the Dreamcast.

@christianlaney9670 27 дней назад

5:51 if you guys didn’t know why he suggested using uv paint it’s because if you watch one of his older videos he shows off his old pcs and one of those pcs had custom water cooling and uv reactive paint and a crap ton of I’ve lights. I just wanted to point this out because that is really cool that he still to this day loved uv pcs

@kazi1 27 дней назад

Damn

@_RX-0 27 дней назад

first comment

@EvilSage42 24 дня назад

instead of fancy spirals, you can also do distro plate looking runs.

@calinnilie 25 дней назад

Finally they showcased the SSUPD case!

@syazwanirfan7142 27 дней назад

6:20 GYATTTTTT

@edithocastillojr.9249 27 дней назад

Yo! Linus, this is one of the reason why I keep watching every video release you guys have.. This surely will change a lot for Hard line tubing a computer, and yeah.. having a waterfall as part of the water cooling would be an awesome idea, checking the effectivity for thermal I'm pretty sure that will be a game changer. The concept is phenomenal and the applications if proven effective for thermal cooling, has tons of potential. ~Im watching here all the way from PH.

@ztonner5166 27 дней назад

I’ve been trying to figure out a good way to do all the tubes for water cooling a computer and this literally is my answer. I already know how to do all of this and it should be easy for me. Thanks for being guinea pigs for me.

@ForeverSinz 26 дней назад

High quality content as always!

@thorium9190 26 дней назад

Recent iPhones have LiDAR sensors that you can use to generate 3D models with apps like Polycam. It can be a lot better if the app is more refined.

@benw2838 26 дней назад

As someone who builds underwater hardware, it was fun to see them learn lessons that I learned a few years ago.

@chemicalhorre 26 дней назад

I want to try and build custom distroplates with this idea. Finding one for each case is insane, but with this, you could beef it up and counter sink the screw areas for the fittings.

@sebastiangreen8369 27 дней назад

Lamina flow idea is awesome

@ElectronStarCollapse 26 дней назад

1 out of 10 of these I own (B17 Bomber). This definitely gives me quite a few ideas for games to hunt.

@Parth-Jain-04 26 дней назад

I hope we see this in more showcase builds

@3lbsObacon 14 дней назад

This is one of the only times I was ahead of the game with one of your sponsors. We use Acronis for a number of our IT needs and it has definitely made my job a crap ton easier. It's also super affordable compared to anything close to a competitor.

@liftedplane 26 дней назад

I use that same case for my office pc, I kind of want to do this to it now.

@aeonspast 25 дней назад

This is super cool but the GENUINE excitement just makes it all the cooler. Can't wait for the waterfall cooled PC.

@cppctek 27 дней назад

This is awesome ❤ I could use this on my water cooled rog ally project

@pesoen 27 дней назад

one thing i would love to see now, is a small reservoir built into the tube(so for instance the spiral could be filled out, and used as a reservoir) and it could make water cooling a tiny form factor pc better, since you can fit the tubes in where there is space, and make a small reservoir where there is space for it, and even a fill cap located in a convenient spot, and a drain port as well.

@walterwhite415 24 дня назад

This opens a lot of opportunities! Why even have tubes, when you can have any shape? Why not build in additional little coolers at places where you have additional space? Why not build in LED and go crazy on the material, to create something really funky? You could really build individual custom PC and you could try out cooling solutions that have not been done before.

@Bernatchly 26 дней назад

I just appreciate the fact you're using a Meshlicious case! (I think...). Love mine a lot, despite the trickery in routing things!

@winniethewhor 27 дней назад

One interesting benefit to the spiral tubing is you've inadvertently created a secondary radiator in your PC. There's a heckin lot of extra surface area to radiate heat through.

@user-wp1hi4cp8n 13 дней назад

I loved the “Charles that’s not a challenge just sit down.”

@jojobobbubble5688 26 дней назад

I would never do this myself... But this is soooo frickin cool man!!! Also, please have Alex do the video you mentioned. Sounds super cool too!!

@Derived_One 27 дней назад

In case you have not tried it, white PLA/PETG is great for LED diffusion as well.

@user-ks4gj2oz1f 26 дней назад

I can already see some new case ventures making use of this

@thetimecapsule1680 27 дней назад

Yes! Make alex do more sketchy cooling projects, always a favorite of mine!

@Lianpe98 27 дней назад

2016 Linus is back (I haven't watched ltt in a while but the white coat and camera angle are rather nostalgic)

@AugmentedPixel 27 дней назад

In my state we can print bottom receivers of pistols with resin printers using engineering resin as long as it isn’t sold and it’s so much stronger than you would think