Zero Turn Transmission: Worth Rebuilding?

Подписаться 135 тыс.

Просмотров 66 тыс.

50% 1

amzn.to/2Em8Gf8 Snap Ring pliers set
amzn.to/2YJTFeZ Milwaukee High Torque 1/2" impact M18
amzn.to/2ElJMMP Hydro Gear Center Section
amzn.to/2WjdOe4 Hydro Gear Oil Filter Set
www.propartsdi... Great parts selection and fast ship.
In this video, I show you what to look for in rebuilding a transaxle and when too much damage is not worth putting your money into it.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@doublewide6 4 года назад

Here is a list of tools and parts for most these transaxles: Good Luck with your project let me know if you have questions: amzn.to/2Em8Gf8 Snap Ring pliers set amzn.to/2YJTFeZ Milwaukee High Torque 1/2" impact M18 amzn.to/2ElJMMP Hydro Gear Center Section amzn.to/2WjdOe4 Hydro Gear Oil Filter Set amzn.to/2Dgrhf4 Wet Sandpaper Assortment amzn.to/3hPn0Ov Wet Honing Block/Stone amzn.to/2ECF3JH Permatex Aviation Gasket Former amzn.to/3gffmg7 Permatex Right Stuff Sealant amzn.to/3hOfbsq 20W 50 Synthetic Motor Oil amzn.to/2Dn1iCM Oil pump can amzn.to/2Xau4NW Brake parts cleaner 12 Pack amzn.to/33aUXVx Hydro Gear Center Section Replacement amzn.to/3jYIvhY Hydro Gear Cylinder Blocks amzn.to/2Pbxn2Z Hydro Gear Motor Block

@jefferytittle5424 3 месяца назад

H People 0 p

@barrett9631 3 года назад

I have a older john deere L130 Tractor with hydro trans. It never performed as well as I needed and I replaced it with a another tractor and parked the old john deere for years. When I had time to researched about the transmission decided it wasn't worth the money or labor to miss with it and tried to give it away ( nobody would take it). So as last ditch effort I changed the oil to 5w50. Now many years 12 years it final runs great. All the power I needed much better than when it was new. I found out through research that John Deere to save money didn't fill with transmission manufacturer recomended oil to save money, they used standard 30w oil instead of higher grade fluid 5w50 . I almost replace transmission $1200. Thanks John Deere.

@RobertSAllen-ti1xj 2 года назад

this is 100% true. ive was told this right from Tuff torq rep. Robert HydroHouse Spring green Wi.

@nashguy207 4 года назад

Looks like some shade tree mechanic was in there and just halfway patched it up to sell the tractor to me. Thanks for sharing Bob. Have a great weekend!!

@robertcrum6169 4 года назад

Thanks. This is reality, good call DW6

@sherrischneider2794 2 года назад

New trans is almost $1000.00. You can rebuild it for around $350.00. Go for it

@michaelking5498 5 месяцев назад

Great video, very knowledgeable on these transaxles

@johnjorquez3982 18 дней назад

Can you drop a link for a breakdown of these and where to get parts?

@123BYB 3 года назад

Great video on how to’s 👍🏾👍🏾👍🏾👍🏾👍🏾

@sixtyfiveford 4 года назад

Never a good sign when someone else has been inside.

@bigsonslawncare 3 года назад

I have this same unit and tractor ZTR 50 with 478 hours running good so far. How long have you seen these last? I'm basically flat land.

@JeepAddict 2 года назад

Silly question, but if a guy wanted to replace his zt 2200 hydros, could he replace them with zt 2800 hydros? The mounting tabs, hubs, and linkages other than the parking brake seem to be the same but not having them side by side, it's hard to tell. Any info would be appreciated

@andy1way Год назад

Pry or hammer?

@fxdwings Год назад

Have a zt3100. Loss of power due to cooling fan hitting battery and acid everywhere. Overheated transmission. Long story short got it all back together and now I have 50% power from that hydro-gear under load. I've bled it and done everything I could possibly do to fix. Any idea what it could be? I'm going to pull it sort and see what I can find but not sure what I'm looking for. TIA

@sherrischneider2794 Год назад

The oil is too thin.

@battalion151R 3 месяца назад

Looks like 5 or 10 weight.

@robertcrum6169 3 года назад

Thanks again

@petefroud5308 4 года назад

The trans has been lashed up Bob .Someone trying to hide faults.

@smallenginerepairs3772 Год назад

Good vid 👌

@thereve 3 года назад

Is it worth the trouble on these lower end units to tear the drives off the tractor and changed the oil in them at some point in their life?

@deanguando1335 2 года назад

I believe yes - but try finding any information on it.

@fillslawncare 4 года назад

Someone already tried fixing it? Double labor rate day 🤣🤷‍♂️

@aleblanc3547 4 года назад

Those things look pretty precisely machined so throwing in Chinese washers that look “close enough” just isn’t going to cut it.

@vincentconner8429 3 года назад

I have a Question, I have rebuild my transmission twice, and I still cannot get to work. I have rejust the handles and nothing. I was wondering do you have any Ideas what is going on.

@jasoncochran1210 3 года назад

Check valves could be loose or pump or motor gouged up

@battalion151R 3 месяца назад

Did you change the charge pump cover? Might be on backwards.

@yoyo9121 3 года назад

How do I get a hold of you

@bobyehchaoyi 3 года назад

Hydro pumps and motors are ridiculously expensive and are so unreliable. The last less than 1000 hours?

@BuiltRiteTrans 3 года назад

80 Foot Pounds!!! HAHAHAHAHAHAHAHAHAHAHAHAHA WHATEVER!!!! LOL

@failranch9542 2 года назад

Ya. Might be 80 inch pounds

@danielkahle5077 3 месяца назад

Have you ever put one of these back together with new pumps and it still wouldn't work after warmed up

@danielebrparish4271 23 дня назад

You have to bleed the air out of the system before it will work.

@gusbiv8282 3 года назад

They make rebuild kits for these between $300 and $350 that has the two hydro motors, pump housings, seals and everything you need for the hydro mechanical side, not counting things like the drive gears and outside fan and pulley, even comes with a gallon of fluid.

@deanguando1335 2 года назад

Where?

@1anthonybrowning 4 года назад

I wonder if the guy who was in this hydro before will see this video, and hope no one finds out it was him.

@dannyspencer3303 4 месяца назад

Great video, after pecking for about 20 minutes I made a slide hammer like yours took less than 5 minutes to pull it, thanks for the tip

@BrucesShop 4 года назад

You can spend up to the value of the tractor.

@jerryluttrull7641 3 года назад

I like your slide grip tool

@lykaojalao2733 5 месяцев назад

The guy who torn this thing down watching right now with a big laugh. The seller also is probably whispering “sucker”. I on the other hand, I am pissed at both. Hope the mechanic will be banned from fixing things. Hope the seller will get sued. These two people are bad people. Meaners….

@jameslester4474 2 года назад

Hum... 350.00 in parts to fix, or 1200.00 for a new Transaxial. Tell me how this is a better deal to get a New Transaxial?

@RJ-0301 2 года назад

Yeah, SOMEBODY got inside and saw it wasn't worth the fix so they haphazardly slapped it back together and sold it. Or the mechanic just threw it back together to give it back to the owner, who in turn sold it knowing it was shot. BTW, love your videos. You have a wealth of knowledge, but even moreso, you have a great demeanor and patience that is evident in your videos. Good teacher brother!

@raineetriche9685 2 года назад

very true !! some videos are sooo hard to watch , they just ramble on about useless information . Drives me nutz.. like this guy !!

@butler386 4 года назад

Hope he did not pay a lot for that tractor cause if he did he really got screwed. Some sellers are crooks for sure. Thanks for the video

@claytondeville6825 Год назад

Sand paper and sand those peaces it be like new

@tevanoff6754 2 дня назад

Just wanted to thank you for sharing your knowledge with us. Much appreciated.

@vincevesper167 13 дней назад

Great video - coupled with "I Fix It All" video, which actually references this video, full confidence can be gained to tackle what is actually a complex project, and save a huge amount of money repairing your own transaxles!!!

@iFryTube Месяц назад

You charge your buddy for repairs? Not much of a buddy

@rverro8478 4 года назад

Is a transmission worth rebuilding ? it depends on the price of a new one and, IF you rebuild it, you know it will be done right. Not like them, John Queer mechanics that put 5W30 oil in a hydrostatic transmission.

@amehigherforchesapeake8982 2 года назад

A new unit is almost $850. I would say it would be cheaper to rebuild it rather than replace it. I am working on the same unit for a friend and need to go the cheapest route for his small business.

@frankthompson5362 2 года назад

very helpful video thanks. having trouble with a drive on my zero turn. Cox Cruiser Australian Made

@robbieaussievic 4 года назад

..... I wonder if Mr. Bean had access to the rest of the tractor ?

@vincentshelpfulhints4085 4 года назад

sucks when you think you got a great deal on a mower to find out you were scammed

@davidmccauley906 2 дня назад

Is this a 2800 or 3100 or what?

@mr.c6383 4 года назад

feel sorry for your friend... hack job from the seller

@easyjerryl69 3 года назад

I rebuilt my transmissions, bought new pumps kits . sanded the revolver barrels 400 up to 600 grit. still does not pull/work correctly. But one thing I did notice when I had them apart. I have two 7 barrel revolvers in my hydros. I've watched a few of these videos, Every one I've watched, I see a 7 barrel and a 5 barrel in their hydros. Do you think that it could be my issue ?

@failranch9542 2 года назад

If it’s a 2200 then for sure. Does the other side have 2 5 barrels?

@judyfuller1530 3 года назад

Why has my left side transmission broken twice, and the right hand side is still original. Look forward to any advice please. Gazz

@deanguando1335 2 года назад

Same here - can't find any information.

@failranch9542 2 года назад

Twice? I’m on rebuild #3 of my left unit. I get a year out of it but both of my yards are crazy steep and I run tire chains. The right side is original 2009. Hour meter quit years ago.

@Smalltechguy 2 года назад

I have watched this video before and now I have the same one. The only issue I have with this one is the seal that is behind that brake sprocket. I was able to find the kit number through hyper gear though. I should be able to pull that seal and put the new one in without removing the transmission and replace the sprocket and c clip

@stevemccord8233 Год назад

Love it, i am having some problem with mine. I’m looking forward on doing mine this winter when it gets cooler outside. Thanks

@guillermoulloa7308 Год назад

Usually if you have this problem with one side if you see metal shavings then maybe your other side is next ?

@gabesgarage4522 2 года назад

Got a strange problem, looses pressure and wheel slows to a stop. Then I loosen the bolts on the pump on bottom of them it starts working

@fn6553 Год назад

I was watching to see where to drill a hole for a drain plug to service so it never gets that bad.

@rogermcdonald1607 4 года назад

Someone did a huge cobble job on that transmission! How expensive is a new unit? Nice video! Roger

@deanguando1335 2 года назад

A new unit is way too expensive.

@URBANENGINEER 3 месяца назад

$750 for a questionable online refurb “china new” replacement.

@mc2whls 4 года назад

Sometimes you win, sometimes you lose. Sorry your buddy got ripped off by Seller.

@altonrowell613 Год назад

I think you're right.

@ashleysanders1258 Год назад

This a great video! I have a cheap zero with a ZC-Dubb-3D8C-2DPX and only has 114 hours on it but it has gotten weak on hills and gets weaker each time and I can hear a whine. I am great with engines but never worked on these? Is it rebuildable and worth it? A new one is $800. Thanks for the video.

@URBANENGINEER 3 месяца назад

Did you rebuild it? I’m having similar issues.

@raymondjiii 3 года назад

Can you tell me if the bypass pin the center section - is the pin normally inside the center section for normal tractor use or sticking out for normal tractor use. (whichever the opposite is that will be the free wheeling mode.) Thank you.

@jasoncochran1210 3 года назад

Pin in is engaged out free wheel

@robertrhodes9123 4 года назад

Troy built used to be good long lasting pieces of equipment but that has sure changed. Couple years ago I got a new troy built blower that developed carb trouble after about 10 hours of use. Because it was under warranty I had a new carb put on no charge. Then that went bad . Had an older small engine guy work on it & he said this is junk.

@jasoncochran1210 3 года назад

Mtd bought them out

@mikeadler434 Год назад

👍👍

@Maximus43968 4 года назад

Someone made it so it would move lomg enough to send it down the road. With any luck you buddy will still be right side up on the deal money wise.

@richardsteger2444 2 года назад

I replaced my left hand unit, I might try to repair the original unit, looks like a real challenge! I think it got wet internally, it then overheated !