Zero Turn Transmission Repair Hydro-gear ZT-2800

Подписаться 134 тыс.

Просмотров 271 тыс.

50% 1

amzn.to/2ElkYnX Gearwrench flex head ratchet
amzn.to/2Em8Gf8 Snap Ring pliers set
amzn.to/2YJTFeZ Milwaukee High Torque 1/2" impact M18
amzn.to/2ElJMMP Hydro Gear Center Section
amzn.to/2WjdOe4 Hydro Gear Oil Filter Set
www.propartsdirect.net/ Great parts selection and fast ship.
In this video, I show you how to fix a tractor that is only running in reverse. I also point out what to look for when disassembling and inspecting a hydro-gear transaxle.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.

Опубликовано:

19 май 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 250

@doublewide6 5 лет назад

amzn.to/2ElkYnX

@577buttfan 2 года назад

This guy doesn't answer any of his questions

@heavydownpour560 3 года назад

Best instructional video I’ve ever watched. Thank you for doing such a great job. That barking dog was driving me nuts!

@Saunders64

NO WE CAN'T SEE the Pistons going into WHATEVER YOU ARE holding and doing OFF CAMERA !!!! GOOOOOD GRIEF !!!!!!!!!!!!!!!!!!!!!!

@staconcrete2140

Great video but that dog is frustrating

@lccurtis6548 2 года назад

I don’t know if you check the comments on a post this old I hope so. I have a ZT 2800. It failed on one side. I took it apart and found the center section completely destroyed. The motor block springs broke into pieces and ruined center section. I replaced it and the piston blocks. Put it together and ran like a champ for 5 minutes now it does nothing what could I have done wrong?

@deanguando1335 2 года назад

A lot of pertinent questions in the comment section here - w/no answers.

@davidnorth3411

I just watched a video with a tech showing a John Deere unit fix without replacement , what is surprising is the cost of just one of the drives from John Deere is $2200

@brianbloom1799 2 года назад

Hi doublewide6, Long story short, I just bought a Toro Timecutter ss5000, Never own or drove one, A delivery driver drove it off, spun it around, a couple of times, Everything seemed fine, Its a 2012 model, I paid 1300, The man seemed honest, and said just seat had small rip,tire in front went low after couple of month,s,When I went to drive in back of my home, I would not turn to the Right,only Left, Now I no why the Driver was only turning to the Left for test drive, what could be wrong, I,m on disability, And spent what little we had.Everything I have read say,s bad transmission, Please help.

@patpaulkennedy1965 Год назад

GREAT information but terrible camera work

@helihoot 28 дней назад

Excellent. A little advice. Junk that crazy noisy pancake compressor and get one of these. Unbelievably quiet and fast.. 2 Gallon 135 PSI, Ultra-Quiet Hand Carry Jobsite Air Compressor SKU #: 64596. Harbor Freight

@patrickmertz2426 3 года назад

Great video, thanks for taking the time to make and post it. I have a Kubota with ZT-2800s but after 6 years of service they are still running like new. Greetings from Australia.

@watermanone7567 5 лет назад

That is an excellent video. I gave up doing the bigger stuff a few years ago and really enjoyed seeing you complete this job. Thanks for the great video's.

@chriscostlow4210 3 года назад

Definitely the best how too video on RU-vid. For anyone doing this I found that the perfect thing to pull those seals out is just a little 1 gallon paint can opener.

@johnmills5398 4 года назад

Enjoyed the video and the presentation. You're an excellent mechanic and do (high) quality work. Thank you!

@ocrun6765 2 года назад

That looks fun. I'm going to look for a junker so I can bring it back to life. Excellent video. You clearly know what you're doing. BTW, I came here after watching you sand down the hydro component which was very satisfying. I like learning stuff like this for some reason.

@robertvalente8217 3 года назад

You did a great job. Ive worked for transmission shops for quite awhile and just bought my first zero turn. Im not feeling too nervous about it going bad on me in the future thanks to your video. Also, if you use "Right Stuff" rtv you wont have to wait overnight to add the fluid. It cures VERY quickly. We use it in the shop for this reason. It also bonds very well to metal surfaces to the point that it cant be peeled off. It needs to be ground off with a wiz wheel. Its not cheap but well worth the price. Great Video!

@techman1274 4 года назад

Never mind man I figured out what I did. I ended up purchasing a new cover or cap for the pump and its twice as thick its heavy duty big time but I put it all together and Boom it didn't work so I remembered what you said about the cover being on the wrong way so I flipped it around and it started working really awesome! It was sucking the oil from the reservoir tank faster than I could pour it in. Thanks for the video it helped.

@cmmake 2 года назад

fantastic video. Thanks so much for posting this. I feel much better about buying a z turn with 2800s now.

@thomasprather2109 4 часа назад

Dude I love the video Dude you got to tell the zebra to stop barking…. Great video, very informative and I love how you show every part and call the part name out …