Follow along as Tom installs our UCW Rear Wing Kit on our Toyota GR86. This kit will also work with the 2nd gen BRZ and is the perfect addition to your track car to increase downforce in the rear, increase confidence on the track, and reduce lap times.
-----
UCW Rear Wing Kit: www.verus-engineering.com/sho...
-----
Facebook: / verusengineering
Instagram: verusengine...
Twitter: / _verus_
-----
Maximalism by Punch Deck | / punch-deck
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY 3.0
creativecommons.org/licenses/...
-----
Chapters
0:00 Intro
0:15 Tool Required
1:39 Kit Components
3:11 Holes Templet
3:54 Holes
5:28 installing rivet nuts
6:23 Temporarily Installing The Mounting Plate
9:17 Setting Up The Templet On The Exterior Of The Trunk
12:51 Test Fitting The Wing Upright
13:55 Cutting Out The Slots For The Legs Of The Upright
15:17 Installing The Mounting Plate, And Upright
18:18 Temporarily Installing The Beauty Plate
19:54 Prepping The Upright For Beauty Plate
20:21 Directions For InstallationTape
20:25 Adding Seal To The Upright
23:15 Adding Tape To The Beauty Plate
26:57 Installing the Wing Blade
28:14 Mounting The Wing To The Uprights
29:04 Adjusting The Wing To Your Liking
31:33 Signing Off
7 июл 2024
