*Note* Teflon tape, or pipe joint compound is not to be used on any connection that uses an o-ring or gasket. It is however needed on the brass control stop adapter. This was not shown in the video but will still help provide a leak proof connection. More information on teflon tape: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9DhL0vet4gk.html Guide on pipe joint compound: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-a0jFPj4W8bY.html
Thanks for watching. You'll want to match the gpf flow rate of the toilet or urinal with the gpf of the diaphragm and relief valve. Zurn diaphrams come in kits that are setup for that gpf: www.amresupply.com/search?q=zurn+diaphragm or you can just replace the diaphram membrane itself as listed here. You would just match the same colored flow restricting ring: www.amresupply.com/part/P6000-ER15-USE-P-6000-ER15
Thank you for watching. We are currently filming appliance repair videos so there will not be any new flushometer videos in the near future. There are some similarities between models so many of the same steps apply.
Thanks for watching. You'll want to make sure that you match the flushometer based on type: Urinal vs Water Closet. Then match based on flow rate (gpf which is gallons per flush). If you're replacing the same flushometer, then you can look for the flow rate as it is often printed on the side of the flushometer, or on the side of the toilet. As well opening the old flushometer you can tell what flow rate it is by the type of diaphragm and flow restricting ring.
Thanks for watching. You'll want to make sure that you match the flushometer based on type: Urinal vs Water Closet. Then match based on flow rate (gpf which is gallons per flush). If you're replacing the same flushometer, then you can look for the flow rate as it is often printed on the side of the flushometer, or on the side of the toilet. As well opening the old flushometer you can tell what flow rate it is by the type of diaphragm and flow restricting ring.
one my favourite, low maintenance easy to repair and best part durability. You ll have time to repair a crane presto 3-4 times before you repair a zurn.