It works the battery with some charge in it will reset the “dead”one.In my case I had 2 dead and one working battery.The working battery was used to initialise the other 2 batteries then put on charge and both charged.
I bought my saw new it was a manger special on the day I went to the store I paid $288 I got $100 of I still have the saw even now I can buy a new cabin table saw this Sears contrator saw been with. E so long it's a part of me and I have made a lot of furniture projects with am sure you will to
Thanks Tess! I can give you any info you need, just let me know. Sadly my Dad passed in April. I'm trying to get the license on my own right now, so I closed the family business down temporarily...
Oh this was a learning experience for sure! I want to keep melting but it’s been about 110F outside for the last month and this week it’s been 120F. So this might be a fall and winter thing haha
ram owners do it because they think it makes them look cool. chevy owners do it because their too lazy to adjust the mirror again when they bring it back in lol
Okay,so what you have is a crystal ore line, those are normally found with opal and thats not how you want to break it, it looked like it was quartz which still would be rare. The weakest part of the rock is that crack so tap gently all around it dont rush it. so most geodes have cracks among the rocks if the rock feels lighter than it should than its a hollow geode. If there is cracks among the outside and it feels heavy than its solid through and through, hit lightly on the hollow hit hard on the solids.could u imagine if i was like i think thats a daimond, and my hammer breaks daimonds let me hit it as hard as i can, uh oh all worthless now. Be gental my dude stop being a power house and do 5 minutes of research please
One way to tell is if it’s lighter than the other rocks in the area. This one was but apparently not a geode. You can also shake them and if you hear something rattling, then there’s a void and possibly a geode
Legend has it this young man still hasnt found the center of that silly little board. He should just get the boardstretcher, sooo much easier to just stretch the wood to the size you need...
The method works but he marked on the wrong side of the tape. The right edge of the tape is anchored at the front end not the left edge. Therefore it had to be rotated to 6 inches on the right side of the tape to find center. Had he done it right it would have been perfect.
2 5/8 + 2 5/8 = 5 1/4... This is a failed method... Measure left to right and put a mark at 2 3/4, then measure right to left and put a mark at 2 3/4. The center of the board is the center of these two marks.
Drill a hole in a coin then put a screw in the coin and the other side of screw in the drill and now start the drill eventually the centre of the coin get too hot and it will came out
Small garage/workshop… so I’m slowly building this spot out to have shelves and cabinets. So I figured why not enclose it. The dust bag was helpful when I did use it, but still had a bunch of dust/debris go around it too, so this shroud helps contain it. And the vacuum takes care of the finer dusts that usually goes towards the front of the mitersaw.
This is cool and all but why not just use the built in port on the saw for attaching the vaccume? The whole box you have built just seems like it's gonna trap a bunch of sawdust in it and be very difficult to vaccume it out, you can already see it starting to build up in this video. As far as the plastic to keep dust out of your face, just wear saftey glasses...
The box actually keeps about 90-95% of the dust contained, so it’s easier to breathe while working in the garage. It’s too hot to keep the garage door open while working. I did wear a mask for awhile, but it’s just too hot, so this is a better alternative. It’s actually not that hard to vacuum it all up, takes only a few seconds to clean it out.
This is cool and all but why not just use the built in port on the saw for attaching the vaccume? The whole box you have built just seems like it's gonna trap a bunch of sawdust in it and be very difficult to vaccume it out, you can already see it starting to build up in this video. As far as the plastic to keep dust out of your face, just wear saftey glasses...
I agree with you it looks stupid but in a way matches there rubber band tires and idiotic huge wheels hanging out knocking down mail boxes I guess it makes them feel good to flip up there mirrors spend 120 dollars a week on a wheel payment and wear a flat bill cap pulled down to there eye brows
I support fixing things instead of throwing things away. Our landfills are overflowing with things like a toaster with a broken arm because of people's willingness to just toss things and replace them.
Six inches is enough for you to play with? With only one itty bitty nut? I guess everyone has their own preferences. At least you said it was cute as a nub. 🥰
Im not so sure with goose neck trailers, but with my fifth wheel once I have the trailer dropped, i jump back into the truck and put it in reverese usually not even touching the gas is enough to un stuck it. Which then allows me to release the slide and drive out. No more jumping in the truck
I don’t understand it.. if it’s a Ford/Chevy sure why not the mirrors are always up. Otherwise with a Ram it looks like they’re hauling a ghost trailer.
