Actually at 2:03 to the left of the air duckt there is a un used harness connection. That might have power for the USB. I never tried it, sold the truck back to the daeler
@@bincockwell2610i see a usb cable to the right of the air duct? Is that what you’re referring to? If so, that’s a charging cable you had plugged in at 0:08. Or is there a harness to the left that’s not visible in the video?
@@bincockwell2610 2:24 there’s what appears to be 2 wiring connections going under that carpet…is that the one you’re talking about? It looks connected. Are you sayin they were just under carpet unconnected?
@@Alex-oy6wb exactly, those were not connected to anything, just held in place by clips. Not sure if they had any power going to them. Could be a possibility. Good luck!
Its your lifters. 5 to 6 ticks per second at ~650-750rpm cold start is 1 tick every 2 revolutions which is a valvetrain noise. The reason it starts quiet is because lifters have full oil from yesterday at first, but the spring pressure is forcing oil out of the lifters during the first 30-45 seconds. It takes a minute for oil to flow through all the lifter orifices and block channels and the oil gradually works its way back into the lifters and they get quiet again.
Awesome vid man, who would have thought following the directions would work as intended 😅😅. Thank you I just ordered my goo gone. They should sponsor you for this vid alone.
Did yours come with the vin number on that tag? If it did do you mind sharing because im looking to find the floor harness to make everything work mine is exactly like yours!
It's as much personal as technical. For instance, one question was "talk about a time I overcame adversity". It's very structured with 3 people - maintenance Manager, HR, and low Lever supervisor. There's really only 4-6 questions. You interview is scored by how detailed you answer each question. Talk about training received, experience, previous employers, safe work habits, use of PPE, ability to reference information, ect. Short answers result in lower score. Good luck, stay confident.
“That’s pretty cool” repeated at least 3 times as he wastes time peeling plastic dip because he didn’t know painting is 90% prep and 10% work. Yeah pretty cool, huh?
Heard that for 30,000 miles, drive from SC to MI to TN, etc. piston slap doesn't effect durability or reliability of the product according to all data.
