The House of Ham is a home of amateur radio related topics and information that should be of interest to Hams of all skill levels. This channel is intended to be a place that provides value to the ham community. I welcome all feedback and am interested in providing content that is of interest to you. Please feel free to drop me a line.
It's always a good video when Glenn is on! I just submitted an application for Becky and I CWI in the fall! It's going to be a challenge to cram it into the busy schedule, but CW is important to both of us and CWI sounds amazing! Also, I just noticed that we weren't subscribed yet and fixed that also!
Thanks. You both will have a great time in the class. It is a ton of fun and you will make new friends along the way. Depending on which class you are in, I may see you.
If you travel like I do, the bluetooth programming via the ODmaster app is super easy for programming in local repeaters. Very easy to do with my Android phone. Used to do it via Chirp and laptop while on the go...not necessary and much easier this way. Cool review...I bought two of these and really like them so far.
ODMaster is convenient. The database of repeaters isn't the most up to date but I agree that the ability to have different configs/code plugs saved is a real benefit.
There is no hardware restriction and in talking with Dave (the owner of the radio) he said there used to be a way to open up segments in a config file but the newer version of software didn't allow for it. Bottom line: if CAP/MARS is a requirement for you, I wouldn't count on this being your choice.
I have the SunSDR2 DX and have been using it as my main HF transceiver since 2-3 years. If any viewer decides to get one, make sure you get the latest hardware generation. I believe they are at gen5 now. The one I have is gen3 and it has some hardware quirks like loss of signal, and audio issues with a directly connected headset. Usually after a longer period of operation. These effects go away by simply clicking the ON/OFF button on the SDR software (no need to reboot hardware). The DX is not full break-in CW. Its keying is very snappy though, which I personally like. The older generation DX's are rated at 80 Watt, not 100 Watt. The DX is, in my view, the most enjoyable transceiver I have owned so far for QRP operation at home. Using a power calibration of 22.5 Watt, the output will go as low as 60mW on my copy. It is also very easy to safely drive an amplifier at these lower outputs. I also own the Yaesu FTdx10, and its lowest output is 5 Watt. For me this is too high to control power on FT8 at lower levels (say 100-200 Watt output). The amplifier I have will already flirt with 300-400 Watt at 5 Watt input. The small form factor is also its nemesis. I share the view of others I have heard on the bands that temperature control can be an issue on this model. The fan is outstanding, but the less heat trapped in its confinement, the better. Part of the reason I decided to lower its power calibration and let an amplifier do all the heavy lifting. The next SDR I may purchase, if it supports TCI, is likely going to be a Flex because of its bigger size. I get unsolicited praise on the audio from the SunSDR2 DX. TCI is fantastic to interface with digital mode software, no more hassle with virtual audio cables (I don't use a computer mic or headset). ExpertSDR v3 is nice and easy to use software. The waterfall is just so pleasant to see what's going on. The DX gets far more mileage than the FTdx10 in my radio room. It hears really well on FT8 and CW. There is an active forum on the Expert Electronics web site for help. Support is responsive and knowledgeable. A final word of warning; if you buy extra pig tails for the RF ports, make sure that you get connectors with the thinner pointed center pins. There are also connectors with thicker, rounded pins on the market. Do NOT use these as they have the potential to damage the RF port which will need replacement. Check the ones that come with your SunSDR2 DX before use. The connector should mate with the RF port without any physical effort.
I run the Hermes Lite II been alright as a QRP rig. I operate CW....but I'm not a "gun" operator still on m L plates :). Great video. Will that run on Thetis software too? I've chatted to a ham in OZ, who has SDR experience and he swore by this little SDR rig, saying is was bang for buck..
It will not run Thetis. One of the drawbacks is that the interface to the radio has not had any official documentation, so right now Expert Electronics is the sole source for the client software. It is in active development, though, and right now the beta software is complete enough that I don't feel like I'm missing anything, other than physical knobs and switches.
Mine is on 24/7 and I operate on HF/10/8/6/5/4/2M on this radio. I have the new 40Mhz low VHF bands, best radio to date, and I have owned the overrated ftdx101.
Bob while in Dayton I picked this key up as well as the inductive one offered by K6ARK. I like both better than the original elecraft key. Doing a great job on these instructional videos for the KH1. Can't wait to see the series you do on the kx2. Thanks
Thank you for sharing HOH. I am wondering if I can plug those paddles into my cwmorse Scout CPO. That operates with a 3.5mm cable also. I am in the process of learning morse code and right now I am using a straight key by cwmorse also. I would like to try some paddles. Thank you for sharing.
I really like the stiffness of the N6ARA connected to the KH1. I can make the standard KH1 paddle work, but it's got a softness to it that I don't like as much.
Go to hamstudy.org and click on the "Find a Session" button. On the session page select remote at the top. You can find a timeslot that fits your schedule. For remote sessions, your location doesn't matter. Best of luck on your exam.
In CW, the filter widths are: 300hz, 500hz and 2Khz. In USB or LSB they are 2.2Khz, 2.5Khz and 2.8Khz. You will likely hear a much bigger change on CW mode than the others.
TIDRadio if you're listening, stop selling radios with spurious emissions! Improve your quality and pay your workers a reasonable wage. Then charge more for your products! If the H3 was excellent quality, I'm sure most people would be happy to pay $100 for it. Stop trying to cut costs... Improve quality!
Thanks for your point of view. Personally, I don't agree but that is OK. I welcome differing opinions on this channel. This isn't new. Hams have always studied the test since the inception of the question pool. The only thing that is modern is the mechanism which is now the web vice books. As for the selling stuff part. the folks at Ham Study do sell the SignalStuff antennas (very subtly by the way) to help fund the costs of running the ham study and exam tools infrastructure. If you don't know, these costs can be significant. I think you need to look at the motivation. Many create sites to sell stuff. I believe this is the opposite. They sell stuff to keep the site going.
Thanks for the video and information. Is there any chance you could please to another video with a full break down of equipment / kit / accessories you take when you are leaving your shake to establish contacts I the field?
@@houseofhamradiofantastic news, thank you! I have found set up and breakdown videos help me develop my shopping list 😂. Oh and they also show me different set ups and what works in different scenarios and frequencies. I appreciate you taking the time to respond to my comment and also making videos that help share your knowledge. I have found the amateur radio / HAM community to be one of the best for inclusion and helping people with less knowledge
Thanks for the kind words. I will look into doing a memory video. For your awareness, each band will hold only one memory so not something most will use.
Thanks for the overview on 3d printing. I've now got myself an Anycubic Kobra 2 Neo. I'm going to begin printing the more flexible PLA+ for prints for portable use. When I need to make things for permanent outdoor installations I will defintely try PETG or PETG+. Are you able to share the prints shown?
For 20M and up this is a resonant vertical. The Buddipole is a loaded vertical for all bands. Doesn't mean that one is better than the other, they are just different. I find the Chelegance to be less fiddly and quicker to set up so long as you have an analyzer. I have never done a side by side comparison as far as signal reports but I would imagine they would be similar.
Well done. Professional in every way. I would suggest an advanced chapter. This should include how to customize the optional display items in a step by step manner. Perhaps an on the air example of turning the RIT on and off in real time as well. Overall, and excellent job. 73 VE6GK SN 219
@@houseofhamradio yes sir. I'm taking a few notes for my own videos and channel. Lol. Noteably, you're very well spoken and i can tell you took your time with edits. 73
Sirs' you're 1K % INSPIRATIONAL Teachers. As a begineer I got my extra through your encouragement & guidance. I bought a FT-991A from HRO ❤thankyou🎉 Sir CHEERS 73s✨️ 9V1KM KK7QGL Singapore
I found this video extremely helpful. I would also greatly appreciate you doing a deeper dive on how to adjust and fine tune the factory settings as sometimes these settings are accidentally moved.
Thanks Daren, That really depends on which factory settings you are referring to. Some require special equipment to properly adjust. All of the "Danger Zone" settings require the user to unlock them so they shouldn't be accidentally changed. That being said, if there is something in particular you would like to see, I will look into it. 73 Bob
I really like simple devices (focusing on primary functionality without too much extra stuff and gamification) and I operate 90% or more portable in field - so after several years using the FT818 I just ordered a KX2 with several optional stuff. Yes - expensive. Very expensive in the complete package. But I’m really excited on getting this thing out in the field with some random wire antenna and doing wonderful contacts all over the world😊).
the KX2 is my favorite field radio by far. KH1 is a close second. I sold my 705 when I bought the KH1 and I don't regret it. I had an original FT-817 and it was a cool radio too but you will love the KX2. Nice having a great ATU that can tune almost anything and an internal battery that runs the radio for a looooong time.